CROSLEY CO7309 Outdoor Towel Valet Instruction Manual
- June 4, 2024
- Crosley
Table of Contents
CROSLEY CO7309 Outdoor Towel Valet
PART LIST
HARDWARE LIST
-
Step 1. Lay long side panels (part A) down on a soft flat surface, such as a carpet, as shown below. Attach locking casters (part I) and swivel casters (part J) to long side panels (part A).
-
Step 2. Attach short side panels (part B) to the long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4)
NOTE: Please do not fully tighten bolts until the unit is fully assembled . -
Step 3. Attach long side panel (part A) to short side panels (part B) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
NOTE: Please do not fully tighten bolts until the unit is fully assembled. -
Step 4. Attach bottom panel (part C) to long side panels (part A) and short side panels (part B) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ). NOTE: Please do not fully tighten bolts until the unit is fully assembled.
-
Step 5. Attach shelf (part C) to long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
NOTE: Please do not fully tighten bolts until the unit is fully assembled . -
Step 6. Attach top frame (part D) to long side panels (part A) using long bolts (part #2), flat washers (part #3), and Allen wrench (part #4 ).
NOTE: Please do not fully tighten bolts until the unit is fully assembled . -
Step 7. Attach connectors (part G) to the top frame (part D) and long side panels (part A) using bolts (part #1 ), flat washers (part #3), and Allen wrench (part #4 ).
NOTE: Please do not fully tighten bolts until the unit is fully assembled . -
Step 8. Fully insert ribs (part E) into the hub (part F) until spring clips click into place.
-
Step 9. Unfold the top cover (part K) and attach it to the assembled unit (parts E & F) as shown below. Attach final (part H) to a hub (part F) of assembled unit (parts E, F & K) to secure together.
-
Step 10. Attach assembled unit (parts E, F, H & K) to connectors (part G) using bolts (part #1 ), flat washers (part #3) and Allen wrench (part #4 ). NOTE: Please fully tighten all bolts at this time.
-
Step 11. Secure fabric curtain (part L) to top frame (part D) using Velcro® straps as shown.
NOTE: Fabric curtain (part L) can be held open by using the Velcro® straps to secure them to long side panels (part A) as shown below.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>