peplink HD2 Dome with Local SIM Injector Installation Guide
- June 4, 2024
- peplink
Table of Contents
Peplink HD2 Dome with Local SIM Injector
How to Setup HD2 Dome With Local SIM Injector
Together, the HD2 Dome and SIM Injector enable deployments where the router
can be strategically placed for the best signal (such as a rooftop of the mast
of a ship). At the same time, the SIM cards can be conveniently located in the
office, passenger area, or bridge for easy changing. For full details on the
benefits and use cases of these products, the datasheet is available at:
http://download.peplink.com/resources/pepwave_MAX_HD2_IP67_DOME_datasheet.pdf
For this document, the HD2 Dome is installed on the rooftop of the truck, and
an Ethernet cable connects between the indoor SIM Injector and outdoor HD2
dome.
Firmware Requirement
Product | Firmware Version | Firmware Download Link |
---|---|---|
MAX HD2 Dome | 7.1.1s137 | [https://download.peplink.com/firmware/plb1/fw- |
b1210hw4](https://download.peplink.com/firmware/plb1/fw-
b1_210hw4_310hw4_br1ent_transit_m700hw3_hd2mini_hd4-7.1.1s137-build4102.bin)
310hw4_br1ent_transit_m700hw3_hd2mini_hd4-7.1.1s137-
build4102.bin
SIM Injector| 1.0.29| https://download.peplink.com/firmware/simbank/fw-
simbank
If the SIM Injector is running firmware version 1.0.24 or older, you need to upgrade to the following
1.0.25 first before upgrading to 1.0.29.
SIM Injector| 1.0.25| https://download.peplink.com/firmware/simbank/fw- simbank
Setting Up the HD2 Dome and SIM Injector
-
Check and upgrade the firmware of the HD2 Dome
- Login to the HD2 Dome via https://192.168.50.1
- Check the firmware version.
- Upgrade the firmware to 7.1.1s137 if the device is running an earlier firmware.
-
Locate the IP address of the SIM Injector from the HD2 Dome’s Client List
- Take note of the MAC Address from the SIM Injector, located on the silver label on the bottom of the SIM Injector.
- Then, go to the Client List in Web Admin of HD2 Dome (Status > Client List), and find the IP address of the SIM Injector according to MAC address
-
Login to the SIM Injector
- Login via http://
, (in this example, the URL of SIM Injector is http://192.168.50.12 - Check the firmware version of SIM Injector, and upgrade it to 1.0.29 if the device is running an earlier firmware.
- If the device is running firmware version 1.0.24 or older, you need to upgrade to 1.0.25 first before upgrading to 1.0.29
- To upgrade the SIM Injector, please go to Settings > Firmware Upgrade
- Login via http://
-
Configure the HD2 Dome to Use the SIM cards on the SIM Injector.
-
To enable SIM Injector discovery, please go to Advanced > Remote SIM Management
-
Enable “Auto LAN Discovery”, and “Save” Then, apply the changes
-
To connect to the SIM Injector from the HD2 Dome, press the “details” button next to Cellular WAN 1 from the Dashboard.
Choose “Use Remote SIM Only”, and “Scan nearby remote SIM server”
Choose the SIM Injector and update the settings and save the changes .
If you repeat the steps from 4b) on Cellular 2, both cellular WANs will use the SIM cards from the SIM Injector. -
If you want to select a specific SIM, in the Cellular Settings, type “:” and then the number of the SIM slot. For example, from the following screenshot, you will choose the SIM cards on slot 4 of the SIM Injector. Use multiple lines to specify multiple SIM slots.
-
References
- download.peplink.com/firmware/plb1/fw-b1_210hw4_310hw4_br1ent_transit_m700hw3_hd2mini_hd4-7.1.1s137-build4102.bin
- download.peplink.com/firmware/simbank/fw-simbank-1.0.25.bin
- download.peplink.com/firmware/simbank/fw-simbank-1.0.29.bin
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>