peplink P1MT08 Pepwave Routers User Guide
- June 1, 2024
- peplink
Table of Contents
- P1MT08 Pepwave Routers
- Specifications
- Product Usage Instructions
- Installation
- Mounting the Unit
- Connecting to the Web Admin Interface
- Q: How do I reset the device to factory defaults?
- Q: What is the default username and password for Pepwave
- Q: How can I check the device information like model name and
P1MT08 Pepwave Routers
“`html
Specifications
-
Product Name: UBR Plus
-
Panel Appearance: LED Indicators for system status and port
type -
Port Types: LAN, Ethernet WAN, Auto MDI/MDI-X ports,
Cellular -
Network Speed: 10/100/1000 Mbps
-
Manufacturer: Peplink
Product Usage Instructions
Installation
For connecting the Pepwave routers to your network, please
follow the instructions provided in the manual.
Mounting the Unit
Refer to the manual for detailed instructions on how to mount
the unit properly.
Connecting to the Web Admin Interface
-
Open a web browser on a computer connected to the Pepwave
router through LAN. -
Enter the default LAN IP address (http://192.168.50.1) in the
address field. -
Login with default credentials (Username: admin, Password:
admin) and change the password on first login. -
After successful login, access the Dashboard to manage WAN,
LAN, and Wi-Fi AP settings.
FAQ
Q: How do I reset the device to factory defaults?
A: Refer to Appendix A in the manual for instructions on
restoring factory defaults.
Q: What is the default username and password for Pepwave
routers?
A: The default username and password are both ‘admin’. It is
recommended to change the password on first login.
Q: How can I check the device information like model name and
firmware version?
A: You can find details about the device, including model name,
firmware version, and uptime in the Device Information section of
the web admin interface.
“`
2.44 UBR Plus
2.44.1 Panel Appearance
2.44.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:
Status Indicators
OFF
System initializing
Status
Red Blinking Red
Booting up or busy Boot up error
Green
Ready
Green LED Orange LED
Port Type
LAN and Ethernet WAN Ports
ON
1000 Mbps
OFF
10 Mbps / 100 Mbps or port is not connected
ON
Port is connected without traffic
Blinking
Data is transferring
OFF
No data is being transferred or port is not connected
Auto MDI/MDI-X ports
83
Copyright @ 2021 Peplink
Cellular
OFF Blinking Slowly Green
Cellular Indicators Disabled or no SIM card inserted Connecting to network(s) Connected to network(s)
2.45 PDX
2.45.1 Panel Appearance
2.45.2 LED Indicators The statuses indicated by the front panel LEDs are as follows:
OFF
Status Indicators No battery installed
Status
Red Blinking red
Charging Low Battery
Green
Full Charged
84
Copyright @ 2021 Peplink
3 Installation
For details on connecting Pepwave routers to your network, please see this
link.
4 Mounting the Unit
Please refer to this link.
5 Connecting to the Web Admin Interface
1. Start a web browser on a computer that is connected with the Pepwave
router through the LAN.
2. To connect to the router’s web admin interface, enter the following LAN IP
address in the address field of the web browser: http://192.168.50.1 (This is
the default LAN IP address for Pepwave routers.)
3. Enter the following to access the web admin interface. Username: admin
Password: admin (This is the default username and password for Pepwave
routers).
You must change the default password on the first successful logon. Password
requirements are: A minimum of 10 lower AND upper case characters,
including at least 1 number. When HTTP is selected, the URL will be redirected
to HTTPS by default.
85
Copyright @ 2021 Peplink
After successful login, the Dashboard of the web admin interface will be displayed.
The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN connection priority and switch on/off the Wi-Fi AP. For further information on setting up these connections, please refer to Sections 8 and 9.
86
Copyright @ 2021 Peplink
Device Information displays details about the device, including model name,
firmware version, and uptime. For further information, please refer to Section
22.
Important Note
Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect
only after clicking the Save button at the bottom of each page. The Apply
Changes button causes the changes to be saved and applied.
6 AP
Please refer to this link.
7 System
Please refer to this link.
8 Status
Please refer to this link.
9 Ignition Sensing
Please refer to this link for the details of Ignition Sensing.
87
Copyright @ 2021 Peplink
Appendix A: Restoration of Factory Defaults
Please refer to this link.
Appendix B: FusionSIM Manual
Please refer to this link.
Appendix C: Ports usage overview
Default Port Number
Usage
Service
Inbound/Outbound
UDP 5246
Data flow
InControl
Outbound
TCP 443
HTTPS service
InControl
Outbound
TCP 5246
Optional, used when TCP
443 is not responding
InControl
Outbound
TCP 5246
Remote Web Admin
InControl Virtual Appliance
Outbound
TCP 4500
VPN Data (TCP Mode)
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
TCP 32015
VPN handshake
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
UDP 4500
VPN Data
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
UDP 32015º
VPN Data (alternative)
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
TCP/UDP 4500+N-1^
VPN Sub-Tunnels Data
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
UDP 32015+N-1^
VPN Sub-Tunnels Data (alternative)
SpeedFusion VPN / SpeedFusion
Inbound / Outbound*
UDP 4500
VPN Data
IPsec
Inbound / Outbound*
UDP 500
VPN initiation
IPsec
Inbound / Outbound*
UDP 500
L2TP
Remote User Access
Inbound
UDP 1701
L2TP
Remote User Access
Inbound
UDP 4500
L2TP
Remote User
Inbound
Default Status Enabled Enabled
Enabled
Enabled Disabled
Disabled
Disabled
Disabled
Disabled
Disabled Disabled Disabled
Disabled
Disabled Disabled
88
Copyright @ 2021 Peplink
UDP 1194 IP 47
TCP 2222 TCP 80
TCP 443 TCP 8822 UDP 161 UDP 162 TCP, UDP 1812 TCP, UDP 1813 UDP 123 TCP 60660
Access
OpenVPN
Remote User Access
PPTP (GRE)
Remote User Access
Peplink
Remote Assistance Direct Troubleshooting
connection
Assistance
HTTP traffic
Web Admin Interface access
HTTPS traffic
Web Admin Interface access (secure)
SSH
SSH
SNMP Get
SNMP monitoring
SNMP Trap
SNMP monitoring
Radius Authentication Radius
Radius Accounting
Radius
Network Time Protocol NTP
Real-time location data in
NMEA format
GPS
Inbound
Inbound
Outbound
Inbound
Inbound Inbound Inbound Outbound Outbound Outbound Inbound Outbound
Outbound
Disabled
Disabled
Enabled
Enabled
Enabled Disabled Disabled Disabled Disabled Disabled Disabled Enabled
Disabled
Disclaimer:
By default, only TCP 32015 and UDP 4500 are needed for SpeedFusion VPN /
SpeedFusion. Inbound / Outbound* – Inbound = For Server mode; Outbound = For
Client mode UDP 32015º – If IPsec VPN or L2TP/IPsec RUA is enabled, the UDP
4500 is occupied, so
SpeedFusion VPN / SpeedFusion will automatically switch to UPD 32015 as VPN
data port . UDP 32015+N-1^ / TCP/UDP 4500+N-1^ – When using Sub-Tunnels,
multiple ports are in use (1
for each Sub-Tunnel profile). The default UDP data ports used when using (N
number of Sub-Tunnel profiles) are:
4500…4500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015…
32015+N-1″.
89
Copyright @ 2021 Peplink
Appendix D: Declaration
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX BR1 Mini
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Caution Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is
firmware-limited to channels 1 through 11.
FCC Radiation Exposure Statement (for MAX BR1 mini)
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
90
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 Mini for EC25-E)
91
Copyright @ 2021 Peplink
92
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 16.38 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE
Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. contact as:
https://www.peplink.com/
93
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 Mini for MC7455)
94
Copyright @ 2021 Peplink
95
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 16.38 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
contact as: https://www.peplink.com/
96
Copyright @ 2021 Peplink
Industry Canada Statement (for MAX BR1 Mini)
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables
d’Innovation, Sciences et Développement économique Canada.
This device complies with the ISED radiation exposure limit set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
Cet équipement est conforme avec l’exposition aux radiations ISED définies
pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé à une distance minimum de 20 cm entre le radiateur et votre corps.
97
Copyright @ 2021 Peplink
FCC & IC Requirements for Operation in the United States and Canada (for MAX
BR1 Mini)
FCC ID : U8G-P1930LITER6
FCC 15.21: The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RF exposure warning: This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
IC Warning: This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions
1. This device may not cause interference. 2. This device must accept any
interference, including interference that may cause
undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes
1. l’appareil ne doit pas produire de brouillage, et 2. l’utilisateur de
l’appareil doit accepter tout brouillage radioelect rique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
98
Copyright @ 2021 Peplink
Informations concernant l’exposition aux frequences radio (RF) Cet equipement
est conforme avec l’exposition aux radiations IC definies pour un
environnement noncontrole. Cet equipement doit etre installe et utilise a une
distance minimum de 20 cm entre le radiateuret votre corps. Cet emetteur ne
doit pas etre co-localisees ou operant en conjonction avec une autreantenne ou
transmetteur.
Les utilisateurs finaux et les installateurs doivent etre informes des
instructions d’installation de l’antenne et des conditions de fonctionnement
de l’emetteur afin de satisfaire a la conformite d’exposition RF.
This radio transmitter IC 20682-P1930LITER6 has been approved by Innovation,
Science and Economic Development Canada to operate with the antenna types
listed below, with the maximum permissible gain indicated. Antenna types not
included in this list that have a gain greater than the maximum gain indicated
for any type listed are strictly prohibited for use with this device.
Le present emetteur radio 20682-P1930LITER6 a ete approuve par Innovation,
Sciences et Developpement economique Canada pour fonctionner avec les types
d’antenne enumeres ci dessous et ayant un gain admissible maximal. Les types
d’antenne non inclus dans cette liste, et dont le gain est superieur au gain
maximal indique pour tout type figurant sur la liste, sont strictement
interdits pour l’exploitation de l’emetteur.
antenna type Omni-directional antenna gain 5.33
99
Copyright @ 2021 Peplink
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX BR1 MK2
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 24cm between the radiator & your body.
Industry Canada Statement (For MAX BR1 MK2)
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables
d’Innovation, Sciences et Développement économique Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio
100
Copyright @ 2021 Peplink
exempts de licence. L’exploitation est autorisee aux deux conditions
suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioelectrique subi, meme si le
brouillage est susceptible d’en
(i) The device for operation in the band 51505250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) For devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point
and non-point-to-point operation as appropriate; and The high-power radars are
allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux;
(ii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s)
amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation
P.I.R.E spécifiée pour l’exploitation point à point et non point à point,
selon le cas.
En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu’ils ont la priorité) pour les bande 5725-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement
This device complies with the ISED radiation exposure limit set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
Cet équipement est conforme avec l’exposition aux radiations ISED définies
pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé à une distance minimum de 20 cm entre le radiateur et votre corps.
101
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 MK2 )
102
Copyright @ 2021 Peplink
103
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.95 dBm 5GHz ( 5150 – 5250 MHz ) : 22.73 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This equipment is restricted to indoor use only when operating in the 5150 to
5250 MHz frequency range in above countries.
contact as: https://www.peplink.com/
104
Copyright @ 2021 Peplink
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX BR1 Classic
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
FCC Radiation Exposure Statement (for MAX BR1 Classic )
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
105
Copyright @ 2021 Peplink
Industry Canada Statement ( for MAX BR1 Classic )
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions (1) This device may not cause
interference; and(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
This device complies with the ISED radiation exposure limit set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
Cet équipement est conforme avec l’exposition aux radiations ISED définies
pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé à une distance minimum de 20 cm entre le radiateur et votre corps.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables
d’Innovation, Sciences et Développement économique Canada.
106
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 Classic for MC7455)
107
Copyright @ 2021 Peplink
108
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE
Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. contact as:
https://www.peplink.com/
109
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 Classic for EC25-E)
110
Copyright @ 2021 Peplink
111
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.78 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE
Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. contact as:
https://www.peplink.com/
112
Copyright @ 2021 Peplink
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX HD4 MBX, MAX HD2 MBX, MAX HD4 MBX 5G, MAX HD2 MBX 5G
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
IMPORTANT NOTE
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISED Warning Statement For MAX HD4 MBX
Industry Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions (1) This device may not cause
interference; and(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
113
Copyright @ 2021 Peplink
Le présent produit est conforme aux spécifications techniques applicables
d’Innovation, Sciences et Développement économique Canada.
(i) The device for operation in the band 51505250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) For devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point
and non-point-to-point operation as appropriate; and The high-power radars are
allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux;
(ii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s)
amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation
P.I.R.E spécifiée pour l’exploitation point à point et non point à point,
selon le cas. En outre, les utilisateurs devraient aussi être avisés que les
utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu’ils ont la priorité) pour les bande 5725-5850 MHz et
que ces radars pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.
IC Radiation Exposure Statement
This equipment complies with Innovation, Science and Economic Development
Canada RF exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated to ensure a minimum of 20 cm
spacing to any person at all times.
Declaration d’exposition aux radiations Cet equipement est conforme aux
limites d’exposition aux rayonnements IC etablies pour un environnement non
controle. Cet equipement doit etre installe et utilise avec un minimum de 20
cm de distance entre la source de rayonnement et votre corps.
This radio transmitter 20682-P1MBX has been approved by Innovation, Science
and Economic Development Canada to operate with the antenna types listed
below, with the maximum permissible gain indicated. Antenna types not included
in this list that have a gain greater than the maximum gain indicated for any
type listed are strictly prohibited for use with this device.
WIFI Antenna type Replacement Antenna WIFI Antenna gain 2.4GHz / 2.44 dBi ,
5GH / 4.73 dBi LTE Antenna type Replacement Antenna LTE Antenna gain 4.38 dBi
114
Copyright @ 2021 Peplink
Battery Caution Statement (MAX HD4 MBX, MAX HD2 MBX, MAX HD4 MBX 5G, MAX HD2
MBX 5G)
Risk of explosion if the battery replaced by an incorrect type, place the
battery into fire, a hot oven, extremely high temperature or low air pressure
surrounding environment, the leakage of flammable liquid or gas, and
mechanically crushing or cutting of the battery.
115
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 )
116
Copyright @ 2021 Peplink
117
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 – 5250 MHz ) : 19.4 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This equipment is restricted to indoor use only when operating in the 5150 to
5250 MHz frequency range in above countries.
contact as: https://www.peplink.com/
118
Copyright @ 2021 Peplink
UK Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 )
119
Copyright @ 2021 Peplink
120
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18)
121
Copyright @ 2021 Peplink
122
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 – 5250 MHz ) : 19.4 dBm WWAN
: Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This equipment is
restricted to indoor use only when operating in the 5150 to 5250 MHz frequency
range in above countries.
contact as: https://www.peplink.com/
123
Copyright @ 2021 Peplink
UK Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18)
124
Copyright @ 2021 Peplink
125
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W)
126
Copyright @ 2021 Peplink
127
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.6 dBm 5GHz ( 5150 – 5250 MHz ) : 19.4 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
128
Copyright @ 2021 Peplink
This equipment is restricted to indoor use only when operating in the 5150 to
5250 MHz frequency range in above countries.
contact as: https://www.peplink.com/
129
Copyright @ 2021 Peplink
UK Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W)
130
Copyright @ 2021 Peplink
131
Copyright @ 2021 Peplink
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX HD2
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 50 centimeters between the radiator and your body.
Industry Canada Statement (MAX HD2)
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables
d’Innovation, Sciences et Développement économique Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioelectrique subi, meme si le
brouillage est susceptible d’en
132
Copyright @ 2021 Peplink
(i) The device for operation in the band 51505250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) For devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point
and non-point-to-point operation as appropriate; and The high-power radars are
allocated as primary users (i.e. priority users) of the band 5725-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
(i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux;
(ii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s)
amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation
P.I.R.E spécifiée pour l’exploitation point à point et non point à point,
selon le cas. En outre, les utilisateurs devraient aussi être avisés que les
utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu’ils ont la priorité) pour les bande 5725-5850 MHz et
que ces radars pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.
Radiation Exposure Statement
This device complies with the ISED radiation exposure limit set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 37cm between the radiator & your body. 70 cm minimum distance
for the device operate with plug-in USB cellular device which has maximum of
7W(ERP) output power.
Cet équipement est conforme avec l’exposition aux radiations ISED définies
pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé à une distance minimum de 37 cm entre le radiateur et votre corps.
Distance minimale de 70 cm pour que l’appareil fonctionne avec un appareil
cellulaire USB enfichable qui a une puissance de sortie maximale de 7 W (ERP).
Battery Caution Statement
Risk of explosion if the battery replaced by an incorrect type, place the
battery into fire, a hot oven, extremely high temperature or low air pressure
surrounding environment, the leakage of flammable liquid or gas, and
mechanically crushing or cutting of the battery.
133
Copyright @ 2021 Peplink
134
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX HD2 For MC7455)
135
Copyright @ 2021 Peplink
136
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.90 dBm 5GHz ( 5150 – 5250 MHz ) : 22.88 dBm WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This equipment is restricted to indoor use only when operating in the 5150 to
5250 MHz frequency range in above countries.
contact as: https://www.peplink.com/
137
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX HD2 For EM7565)
138
Copyright @ 2021 Peplink
139
Copyright @ 2021 Peplink
2.4GHz ( 2412 2472 MHz ) : 19.86 dBm 5GHz ( 5150 – 5250 MHz ) : 22.68 dBm
WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This equipment is
restricted to indoor use only when operating in the 5150 to 5250 MHz frequency
range in above countries.
contact as: https://www.peplink.com/
140
Copyright @ 2021 Peplink
Mounting the Unit
Wall Mount Some devices can be wall mounted using screws. After adding the
screw on the wall, slide in the screw hole socket as indicated below.
Recommended screw specification M3.5 x 20mm, head diameter 6mm, head thickness
2.4mm. For type 1, the device requires four screws for wall mounting.
For type 2, the device requires two screws for wall mounting.
141
Copyright @ 2021 Peplink
( For MAX BR1 Classic CB IEC 62368-1 )
Output of the external power source shall complied with ES1 and ES2
requirements, output rating 10-30 Vdc, minimum 12W ( DC Jack or POE injector
), with minimum ambient temperature 65 , altitude = 5000m , and evaluated in
accordance to UL/EN/IEC 60950-1 and / or UL/EN/IEC 62368-1 Ensure to connect
the power cord of power adapter to a socket-outlet with earthing.
( For MAX BR1 Mini HW3 CB IEC 62368-1 )
Output of the external power source shall complied with ES1 and PS2
requirements, input rating 10-30 Vdc, maximum 18W ( DC Power Port) or 802.3at
PoE, with minimum ambient temperature 65 , altitude = 5000m , and evaluated in
accordance to UL/EN/IEC 60950-1 and / or UL/EN/IEC 62368-1.
Ensure to connect the power cord of power adapter to a socket-outlet with
earthing.
The MAX BR1 Mini is investigated to IEC TR 62102 as SELV (ES1) circuits and
only connected to PoE without routing to the outside plant, including campus
environment.
142
Copyright @ 2021 Peplink
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX BR1 Pro 5G
FCC 15.21 The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RF exposure warning This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 23
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
143
Copyright @ 2021 Peplink
Industry Canada Statement ( MAX BR1 Pro 5G )
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d’en
compromettre le fonctionnement.Informations concernant l’exposition aux
frequences radio (RF)
Cet equipement est conforme avec l’exposition aux radiations IC definies pour
un environnement noncontrole.
Cet equipement doit etre installe et utilise a une distance minimum de 23 cm
entre le radiateuret votre corps.
Cet emetteur ne doit pas etre co-localisees ou operant en conjonction avec une
autreantenne ou transmetteur.
Les utilisateurs finaux et les installateurs doivent etre informes des
instructions d’installation de l’antenne et des
conditions de fonctionnement de l’emetteur afin de satisfaire a la conformite
d’exposition RF.
This radio transmitter IC 20682-P1AX02 has been approved by Innovation,
Science and Economic Development Canada to operate with the antenna types
listed below, with the maximum permissible gain indicated. Antenna types not
included in this list that have a gain greater than the maximum gain indicated
for any type listed are strictly prohibited for use with this device.
antenna type Omni-directional
antenna gain for 2.4GHz 2.44 dBi
144
Copyright @ 2021 Peplink
antenna gain for 5GHz ( 5150 ~ 5250 MHz ) 4.10 dBi antenna gain for 5GHz (
5725 ~ 5850 MHz ) 4.73 dBi
Battery Caution Statement
Risk of explosion if the battery replaced by an incorrect type, place the
battery into fire, a hot oven, extremely high temperature or low air pressure
surrounding environment, the leakage of flammable liquid or gas, and
mechanically crushing or cutting of the battery.
145
Copyright @ 2021 Peplink
CE Statement for Pepwave Routers ( MAX BR1 Pro 5G)
146
Copyright @ 2021 Peplink
147
Copyright @ 2021 Peplink
References
- Peplink - Unbreakable Connectivity - Peplink
- Peplink - Unbreakable Connectivity - Peplink
- Peplink - Unbreakable Connectivity - Peplink