Peplink ANT-MB-22G-S-B-6 Wi-Fi Antenna system

Features

• 5-in-1 cellular and Wi-Fi antenna system with GPS receiver
• 2×2 Cellular frequencies: 600- 6000 MHz
• 2×2 Wi-Fi frequencies: 2400-2500 MHz & 5000-6000 MHz
• Durable and UV-stable housing
• Black or white color options
• IP68 rated

Overview

• Antenna elements: 2x LTE/5G, 2x WIFI, 1x GPS
• Cellular frequencies 1.2dBi: 617-960MHz
  • 5.7dBi: 1710-2700MHz
  • 5.6dBi: 3400-4200MHz
  • 6.0dBi: 5000-6000MHz
• Cellular bands LTE bands B1 to B86 (except B31, B72, B73, B87, B88), 5G bands n1 to n99
• Wi-Fi frequency bands 4.8dBi: 2400-2500MHz 7.4dBi: 5000-6000MHz
• GPS frequency bands 1.6dBi, LNA 28dB: 1561-1602MHz
• IP rating IP68
• Dimensions (Height) 1.42″ / 36mm (spigot not included) (Diameter) 5.12″ / 130mm
• Coax cable type CFD-200 (4G/5G, Wi-Fi) RG-174 (GPS)
• Connector Type SMA male (4G/5G, GPS), RP-SMA male (Wi-Fi)

Description

The Peplink Mobility 22G is a 5-in-1 antenna built for mobile applications. It supports 2×2 cellular MIMO for high bandwidth and solid reliability, dual-band (2.4GHz & 5GHz) Wi-Fi, and GPS. It is also 5G ready and supports a wide range of global cellular frequencies. The GPS receiver is equipped with high-gain LNA, making it ideal for location tracking. The Mobility 22G has a solid housing made of UV-stable plastic materials. Two color options are available (black and white) to fit different deployments. For easier installation, the antenna comes with different cable length options.

Applications

• Public Safety and mission-critical connectivity
• Mobile healthcare
• Transportation Connectivity

Contact Us

sales@peplink.com

Find a Peplink Certified Partner: https://www.peplink.com/peplink- certified-partners/

Specification

Cellular

• Antenna elements 2 elements
• Cellular frequencies
  • 1.2dBi: 617-960MHz
  • 5.7dBi: 1710-2700MHz
  • 5.6dBi: 3400-4200MHz
  • 6.0dBi: 5000-6000MHz
• Cellular bands LTE bands B1 to B86 (except B31, B72, B73, B87, B88), 5G bands n1 to n99
• VSWR < 2.5 over 85% of the band
• Feed power handling 10W
• Input impedance 50 Ω
• Polarisation Linear
• Ground plane Not required #

Wi-Fi

• Antenna elements 2 elements
• Peak gain
  • 4.8dBi: 2400-2500MHz
  • 7.4dBi: 5000-6000MHz
• VSWR < 2.5
• Feed power handling: 10W
• Input impedance: 50 Ω
• Polarisation: Linear

GPS

• Frequency range 1561-1602 MHz
• Peak gain
  • 0.5dBi@1575MHz
  • 1.6dBi@1602MHz
• VSWR < 2 dB
• Output return loss 10dB max
• Gain: LNA 28 ±3dB
• Noise figure 1.5dB max at 3.3V
• Operating Voltage 3.3V
• Power consumption 8.5 ±2.5mA at 3.3V

Cable

• Type CFD-200
• Loss
  • 0.33 dB/m @ 900 MHz
  • 0.49 dB/m @ 2000 MHz
  • 0.55 dB/m @ 2500 MHz
  • 0.87 dB/m @ 5800 MHz
• Diameter 0.2″ / 5.0mm
• Jacket Half matt PVC, UV resistant
• Termination SMA male and RP-SMA male
• Type RG-174
• Loss
  • 3.4 dB/m @ 1000 MHz
  • 4.9 dB/m @ 1800 MHz
• Diameter 0.1″ / 2.7mm
• Jacket Half matt PVC, UV resistant
• Termination SMA male

Mounting

• Supported types of Panel, wall, pole
• Mounting hole 1 11/16″ / 43mm
• Max panel thickness 19/32″ / 15mm

Mechanical

• Product dimensions (Height) 1.42″ / 36mm (spigot not included) (Diameter) 5.12″ / 130mm
• Packaged dimensions 8.90″ x 8.46″ x 4.29″ / 226 x 215 x 109mm
• Radome material UV stable PC+ABS

Package contents

• Antenna Mobility 22G
• Mounting
  • Mounting bracket
  • Wall/pole mount
  • Double-sided 3M adhesive pad
  • Diameter: 5.08” / 129mm
  • Thickness: 0.08″ / 2mm

Environmental, Compliance

• Cable flammability UL 758 (VW-1)
• Compliance RoHS, REACH & WHEE
• Enclosure flammability UL 94 HB
• IP rating IP68
• Operating temperature -40° – 176°F / -40° – 80°C
• Storage temperature -40° – 176°F / -40° – 80°C
• Salt Spray MIL-STD 810F/ASTM 8117
• UV resistance rating UL 746C (F1, long-term UV exposure)
• Wind Survival 220 km/h

All measurements stated in this document were obtained without a ground

plane.

Ordering information

Mobility 22G

Product Code: Description

• ANT-MB-22G-S-W-6 2xLTE, 2x Wi-Fi, 1xGPS 600-6000MHz, IP68, SMA/RP-SMA male, White, 6.5ft / 2m
• ANT-MB-22G-S-B-6 2xLTE, 2x Wi-Fi, 1xGPS 600-6000MHz, IP68, SMA/RP-SMA male, Black, 6.5ft / 2m
• ANT-MB-22G-Q-W-1 2xLTE, 2x Wi-Fi, 1xGPS 600-6000MHz, IP68, QMA male, White, 1 ft / 0.3m
• ANT-MB-22G-Q-B-1 2xLTE, 2x Wi-Fi, 1xGPS 600-6000MHz, IP68, QMA male, Black, 1 ft / 0.3m

Extension cable

LTE/GPS elements

Wi-Fi elements

Product Code: Element type: Description

• EXC-SQ-15: LTE/GPS elements: Extension coax cable, SMA male to QMA female connector, 15ft / 4.5m
• EXC-QQ-15: LTE/GPS elements: Extension coax cable, QMA male to QMA female connector, 15ft / 4.5m
• EXC-RQ-15: Wi-Fi elements: Extension coax cable, RP-SMA male to QMA female connector, 15ft / 4.5m

Technical drawing

Index

No. Description: Qty

1. Antenna top cover (PC+ABS): 1
2. Antenna bottom cover (PC+ABS): 1
3. Double sided 3M adhesive pad: 1
4. Hexagon NUT (PC+ABS): 1
5. Cable CFD-200 (4G/5G, Wi-Fi): 4
6. LTE/5G antenna connector: 2
7. LTE/5G cable marking: 2
8. GPS cable marking: 1
9. Label: 1
10. Cable RG-174 (GPS): 1
11. GPS antenna connector: 1
12. Wi-Fi cable marking: 2
13. Wi-Fi antenna connector: 2

Antenna VSWR

LTE/5G Antenna VSWR

Wi-Fi Antenna VSMR

Antenna Gain

LTE/5G Antenna Gain

Wi-Fi Antenna Gain

Antenna Efficiency

LTE/5G Antenna Efiiciency

Wi-Fi Antenna Efiiciency

Antenna Isolation

LTE/5G Antenna Radiation patterns (Azimuth)

617-960 MHz

1710-2100MHz

2300-2700 MHz

3400-3800 MHz

4200-5150 MHz

5350-5930 MHz

2400-2500 MHz

4900-5350 MHz

5500-5950 MHz

LTE/5G Antenna Radiation patterns (Elevation 1)

617-960 MHz

1710-2100MHz

2300-2700 MHz

3400-3800 MHz

4200-5150 MHz

5350-5930 MHz

Wi-Fi Antenna Radiation patterns (Elevation 1)

2400-2500 MHz

4900-5350 MHz

5550-5950 MHz

LTE/5G Antenna Radiation patterns (Elevation 2)

617-960 MHz

1710-2100MHz

2300-2700 MHz

3400-3800 MHz

4200-5150 MHz

5350-5925 MHz

2400-2500 MHz

4900-5350 MHz

5550-5950 MHz

Installation recommendation

Panel Mount

Notes

• Cover panel surface to protect the paint work. When drilling a hole, start with a small one, then increase it.
• Cut out diameter should be 1 11/16″ / 43mm. Maximum allowed panel thickness – 15mm.
• After a drill clean up the surface and apply some paint around the hole to prevent corrosion. Attach the antenna.

Pole Mount

Horizontal Pole Mount

Wall Mount

www.peplink.com

FREQUENTLY ASKED QUESTIONS

What is the Peplink ANT-MB-22G-S-B-6 Wi-Fi Antenna system used for?

The Peplink ANT-MB-22G-S-B-6 Wi-Fi Antenna system is used to enhance the Wi-Fi signal reception and range of Peplink wireless routers and access points.

What frequency bands does the ANT-MB-22G-S-B-6 antenna system support?

The ANT-MB-22G-S-B-6 supports 2.4GHz and 5GHz frequency bands for Wi-Fi communication.

How many antennas are included in the ANT-MB-22G-S-B-6 system?

The ANT-MB-22G-S-B-6 system typically includes six antennas.

What type of connector does the Peplink ANT-MB-22G-S-B-6 antenna use?

The ANT-MB-22G-S-B-6 antennas typically use RP-SMA connectors.

Is the Peplink ANT-MB-22G-S-B-6 antenna system compatible with all Peplink routers and access points?

Yes, the ANT-MB-22G-S-B-6 antenna system is designed to be compatible with most Peplink wireless routers and access points.

What is the gain of the ANT-MB-22G-S-B-6 Wi-Fi antennas?

The gain of the ANT-MB-22G-S-B-6 Wi-Fi antennas is usually around 2.5 dBi.

Can the ANT-MB-22G-S-B-6 antennas be used for both indoor and outdoor applications?

Yes, the ANT-MB-22G-S-B-6 antennas are suitable for both indoor and outdoor use.

How do I install the Peplink ANT-MB-22G-S-B-6 Wi-Fi Antenna system?

The installation process may vary depending on the specific Peplink router or access point you have. Generally, you would connect the antennas to the corresponding antenna ports on your device.

Can the ANT-MB-22G-S-B-6 antennas be used with non-Peplink Wi-Fi routers or devices?

While the antennas are designed for use with Peplink devices, they may also work with other Wi-Fi routers or devices that have compatible RP-SMA connectors.

What is the purpose of having six antennas in the ANT-MB-22G-S-B-6 system?

The six antennas in the ANT-MB-22G-S-B-6 system help improve signal diversity, enhance signal strength, and potentially increase Wi-Fi coverage.

Are the ANT-MB-22G-S-B-6 antennas omnidirectional or directional?

The ANT-MB-22G-S-B-6 antennas are typically omnidirectional, providing 360-degree coverage.

Can I use the ANT-MB-22G-S-B-6 antennas to create a MIMO (Multiple-Input, Multiple-Output) setup?

Yes, by using multiple antennas, you can create a MIMO configuration to improve data throughput and signal reliability.

What is the maximum range improvement that the ANT-MB-22G-S-B-6 Wi-Fi Antenna system can provide?

The range improvement may vary depending on the specific environment, but the antennas can enhance the coverage area of your Wi-Fi network.

Can I replace the existing antennas on my Peplink router or access point with the ANT-MB-22G-S-B-6 antennas?

Yes, in most cases, you can replace the existing antennas on your Peplink device with the ANT-MB-22G-S-B-6 antennas.

Are the ANT-MB-22G-S-B-6 antennas suitable for use with long-range Wi-Fi setups?

While the antennas can enhance Wi-Fi coverage, for very long-range setups, you may require specialized directional antennas.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Peplink ANT-MB-22G-S-B-6 Wi-Fi Antenna system Specifications and Datasheet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>