peplink P1234 Wireless Router User Manual
- May 15, 2024
- peplink
Table of Contents
peplink P1234 Wireless Router User Manual
UK Statement for Pepwave Routers ( MAX BR2 Pro )
UK DECLARATION OF CONFORMITY
CE Statement for Pepwave Routers ( UBR Plus )
DECLARATION OF CONFORMITY
We affirm the electrical equipment manufactured by us fulfils the requirements of the Radio Equipment directive 2014/53/EU
The -construction of the appliance is in accordance with the following standards:
EN 301 908-1 V1 5.1..1
EN 300 32S V2.2.2
EN 301 893 V2.1 .1
EN 303 413 V1 .2.1
EN 6231 1 :: 2020
EN 301 489-1 V2.2.3
EN 301 489-17 V32 . .4
EN 301 489-52 V 1.2.1
EN 301 48’9-19 V2.2..1
EN 55032: 2015 + A1 1 :2020
EN 55035~ 2017 + A 11.:2020
EN 61000-·3-2: 2019 + A 1 :202.1
EN 61000-3-3· 2013 + A1:2019
EN 62368-1 :2020 + A 11 :2020
This equipment complies with CE radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
This equipment is restricted to indoor use only when operating in the 5150 to
5250 MHz frequency range in above countries.
contact as: https://www.peplink.com/
UK Statement for Pepwave Routers ( UBR Plus )
UK D1ECLARATI01N OF CONFORMITY
We declare under sole respons1biliiliies that the above product conformist to the .applicable requirements of following relevant UK ·l’eg1s1a11on and designed standards.
UK leg isr:atron
Radio Equipment Regulations 2017
UK Designed Standard
EN 301 9Q3–‘1 V 15.1-1
EN 300 328 V2.2.2
EN 30i1′ 893 V2.1’ 11
EN 303 413 V1-2_1
Other standards App ied
EN 62311: 2020
EN 3U1 489-1 V2.2..3
EN 301 489-17 V3-2.4
EN 301 489-5.2 V1 __2 1 1
EN 30 41:19-19 V2.2 1
EN 55032: 2015 + A il 1 :2020
EN 55035-: 2017 + A1 ·t :2020
EN 61000-3-2: 2019 + A’1:202
EN 61000-3-3: 20t3 + A 1:2019
EN 62368-1 :2020 + A 112020
USB WAN Modem Port Specification
MAX Series
FCC Requirements for Operation in the United States Federal Communications
Commission (FCC) Compliance Notice:
For MAX Adapter
Federal Communication Commission Interference Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
References
- Peplink - Unbreakable Connectivity - Peplink
- Peplink - Unbreakable Connectivity - Peplink
- Peplink - Unbreakable Connectivity - Peplink