peplink U8G-P1MT08 MAX Transit Pro E 1Gbps Dual LTE Router Instructions

: June 1, 2024
: peplink

Table of Contents

peplink U8G-P1MT08 MAX Transit Pro E 1Gbps Dual LTE Router
FCC Requirements for Operation in the United States
ICES Statement
RF exposure warning
Product Specifications:
Frequently Asked Questions (FAQ):
Q: What are the RF exposure warnings for this device?

peplink U8G-P1MT08 MAX Transit Pro E 1Gbps Dual LTE Router

INSTRUCTION MANUAL

The construction of the appliance is in accordance with the fo11owing standards:

EN 55032:2015
EN 55024:2010+A 1 :2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 301 489-1 V2-2.0
EN 301 489-17 V3.2.0
EN 301 489-52 V1 1.0
EN 300 328 V2. 1.1
EN 301 893 V2.1.1
EN 301 908-1 V11 .1.1
EN 300 440 V2.1.1
EN 62311 : 2008
EN 60950-1 :2006+A 11 :2009+A 1 :201 0+A 12:2011 +A2:2013

Yours sincerely,

Keith Chau
General Manager
Peplink International Limited

2.4GHz ( 2412 – 2472 MHz ) : 18.99 dBm
5GHz ( 5150 – 5250 MHz ) : 22.95 dBm
5GHz ( 5725 – 5850 MHz ) : 12.80 dBm

WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class )

Table 4-6: Conducted Tx {Transmit) Power To lerances

Parameter	Conducted transmit power	Notes

LTE
L TE Band 1,3,8.20| t23dBm± i dB|
LTE Band 7| l-22 dBm± 1 dB|
UMTS
Band 1 (IMT 2100 12..2 kbps}
Band 8 {UMTS 900 1’2..2 kbps)| +23d8m±1 dB| Connectonzed (Class 3)

This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 50cm between the radiator & your body.

This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries.

Contact as: https://www.peplink.com/

FCC Requirements for Operation in the United States

Federal Communications Commission (FCC) Compliance Notice:
For MAX Transit Pro E / MAX Transit LTEA (FCC ID: U8G-P1835)

FCC 15.21:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

FCC 15.105
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

ICES Statement

This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables d’Innovation, Sciences et Développement économique Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure warning

This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This radio transmitter IC: 20682-P1835 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

| Antenna Type

Antenna Information

5725 MHz. – 5850 MHz| Peak Gain (dBi)| <Ant. O>: 4.73

:4.73

FCC Requirements for Operation in the United States
Federal Communications Commission (FCC) Compliance Notice:
For MAX Transit Pro E (FCC ID: U8G-P1AX09)
Federal Communication Commission Interference Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Industry Canada Statement (MAX Transit Pro E, IC: 20682-P1AX09)
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

Product Specifications:

2.4GHz (2412 – 2472 MHz): 18.99 dBm
5GHz (5150 – 5250 MHz): 22.95 dBm
5GHz (5725 – 5850 MHz): 12.80 dBm

Frequently Asked Questions (FAQ):

Q: What are the RF exposure warnings for this device?

A: The device should be operated with a minimum distance from the body to comply with radiation exposure limits. Antennas must be installed with specified separation distances to ensure compliance.

Q: Can this device be used outdoors?

A: This equipment is recommended for indoor use only within specific frequency ranges. Make sure to follow the guidelines provided in the user manual for proper installation and operation.