DeLonghi ECAM29084SB Evo Espresso Machine User Guide

DeLonghi ECAM29084SB Evo Espresso Machine

IN THE BOX

• A1. Beans container
• A2. Pre-ground coffee funnel lid A3. Beans container lid
• A4. Grinding adjustment dial
• A5. Pre-ground coffee funnel
• A6. Steam/hot water nozzle
• A7. Coffee spouts (adjustable height)
• A8. Condensate tray
• A9. Grounds container
• A10. Cup tray
• A11. Drip tray water level indicator
• A12. Drip tray grille
• A13. Drip tray
• A14. Water tank lid
• A15. Water tank
• A16. Water filter housing
• A17. Power cord
• A18. Infuser door
• A19. Infuser

ACCESSORIES INCLUDED

• C1. “Total Hardness Test ” indicator paper
• C2. Pre-ground coffee measuring scoop
• C3. Descaler
• C4. Water softener filter (certain models only)
• D1. Milk Spout
• D2. Milk Container lid
• D3. Milk container
• D4. Milk intake tube
• D5. Milk container connector

CONTROL PANEL & DISPLAY

• B1. ON/Off Button
• B2. X2 button / Rinsing function (when pressed and hold for 5 seconds )
• B3. Direct recipes
• B4. Setting menu button
• B5. Milk Clean / Descaling button
• B6. Strength selection and pre-ground function buttons
• B7. Exhausted water filter indicator light
• B8. Water indicator light
• B9. General alarm indicator light
• B10. Ground container light
• B11. Descaling indicator light

GET READY

Remove all stickers and clean all accessories with warm water and mild detergent and dry them. Priming the machine is only required the first time out of the box.

1. Connect the machine to the mains socket. The Water indicator Light will turn on.
2. Fill the water tank with fresh water General alarm and Hot water lights start blinking. Connect the Hot Water Spout to the machine.
3. Add a large water container under both the water/steam spout and coffee spouts.
4. Press the Setting button, which is now blinking.
5. Hot water will be delivered by  the water spout. The machine is now primed and ready for use.

BREW ESPRESSO

1. The first time using the machine, brew and dump the first 3-4 espressos.
2. If you haven’t been using the machine for 3-4 days, perform a rinsing cycle (press and hold X2 Button for about 5 seconds).
3. To brew the perfect espresso set your grinder following the “Extraction Guidelines” on page 10.
4. Select one of the recipes on the touch screen. Preparation will start with default strength and quantity, which can be changed by customizing your recipes.
5. To Brew doppio, first press the X2 button and then select your espresso recipe.

MILK RECIPIES

1. To make a Milk recipe, use the provided milk container. Use cold cow milk or your preferred milk alternative. Whole milk or oat milk will give the best results.
2. Open the Milk container lid by twisting clockwise, in the direction of and make sure the intake tube is correctly insert.
3. Fill the container with cold cow milk or your preferred plant based milk alternative. The graduated scale on the side of the container will give you indications on how much milk to use based on the different recipes.
4. Lock the milk container lid by twisting counterclockwise, in the direction of .
5. Remove the water spout and insert the milk container. Place a cup under the milk and coffee spouts and press the desired milk recipe.
6. To clean the milk system, place a empty container under the milk spout and press the Milk Clean button.

CUSTOMIZE RECIPES

Strength
Personalization:
Personalize the strength of recipes by selecting the desired option.
Quantity
Personalization:
You can change the default quantity by pressing and holding the button of the recipe you want to modify until it blinks. Delivery begins.
Press again to stop at the desired level.
The new parameter is now saved.
Preground:
To use pre-ground coffee, press the icon and add one measuring scoop of pre- ground coffee in thededicated funnel, then select the desired recipe.

EXTRACTION GUIDELINES
Depending on your choice of beans, you might need to adjust the grinder setting to a finer or more coarse choice.

• Flow like warm honey
• Nut-brown Crema
• Well balanced and lingering taste Flowing fast like water
• Light and pale Crema Flowing in drips or not at all
• Crema very dark and not uniform

SET WATER HARDNESS

Analyze the hardness of your water to set your machine accordingly.

1. Wait a couple of minutes. Read the Indicator paper colors and compare with this table.
2. Dip the provided Total Hardness Indicator in a glass of water for one second and shake it.
3. Set Water Hardness on your machine by accessing the setting menu pressing for 5 seconds and then pressing .
4. Use the Strength selector to chose the water level, based on the water hardness test results.
5. Confirm Selection by pressing Coffee . Exit the setting menu by pressing

ACCESSORIES

Enjoy our full line of drinkware: an exclusive line of Espresso, Cappuccino and Latte glasses.

Coffee Care & Maintenance

Experience the De’Longhi Care Kit Line to improve the performance of your fully automatic machine.

References

• De'Longhi | Espresso Machines, Kitchen & Home Appliances
• Photoregister | Help
• De'Longhi | Espresso Machines, Kitchen & Home Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>