JBC TES/JTS Stand for Heater Hose Set Instruction Manual
- June 4, 2024
- JBC
Table of Contents
www.jbctools.com
INSTRUCTION MANUAL
TES / JTS
Stand for Heater Hose Set
This manual corresponds to the following references:
TE-SF (for TE Precision Heater Hose Set)
JT-SF (for JT Heater Hose Set)
Packing List
Box includes one stand according to purchased reference.
Stand for
TE Precision Heater Hose Set ………….. 1 unit| Stand for
JT Heater Hose Set ……………………………. 1 unit
Manual ………………………………………………… 1 unit
Ref. 0027184
Features and Connections
|
---|---
Assembly
Adjust the tool holder angle to suit your work position.
Nozzle Extractor
Place the heating element with the assembled nozzle in the nozzle changer and pull the tool to remove the nozzle. The nozzle comes to rest in the nozzle storage.| Attach the nozzle and press the nozzle onto the heating element with the help of the opening n the nozzle changer.
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the
station
– Use a damp cloth to clean the stand. Alcohol can be used only when cleaning
the metal parts.
– Check periodically that the metal parts of the tool/stand are clean so that
the station can check the tool’s status.
– Periodically check all cables.
– Replace any defective or damaged parts. Use original JBC spare parts only.
– Repairs should only be performed by a JBC-authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.
– Do not use the stands for any purpose other than soldering or rework.
– The power cord must be plugged into approved bases. Be sure that it is
properly grounded before use. When unplugging it, hold the plug, not the wire.
– Do not work on electrically live parts.
– The tool should be placed in the stand when not in use in order to activate
the sleep mode. The soldering tip, the metal part of the tool and the stand
may still be hot even when the station is turned off. Handle with care,
including when adjusting the stand position.
– Avoid the contact of flux with skin or eyes to prevent irritation.
– Be careful with the fumes produced when soldering.
– Keep your workplace clean and tidy. Wear appropriate protection glasses and
gloves when working to avoid personal harm.
– Utmost care must be taken with liquid tin waste which can cause burns.
– This appliance can be used by children over the age of eight and also
persons with reduced physical, sensory or mental capabilities or lack of
experience provided that they have been given adequate supervision or
instruction concerning use of the appliance and understand the hazards
involved.
Children must not play with the appliance.
– Maintenance must not be carried out by children unless supervised.
Specifications
TES
Stand for TE Precision Heater Hose Set
Ref.: TE-SE
NAME?| Nozzle extractor
---|---
NAME?| 1203 g / 2.65 lb
– Package Dimensions / Weight:| 1449 g / 3.19 lb
(L x W x H)| 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in
JTS
Stand for JT Heater Hose Set
Ref.: JT-SE
NAME?| Nozzle extractor
---|---
NAME?| 1234 g / 2.72 lb
– Package Dimensions / Weight:| 1515 g / 3.34 lb
(L x W x H)| 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in
Complies with CE standards ESD safe
Warranty
JBC’s 2-year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labor. The warranty does not
cover product wear or misuse. In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility. a manuales – color gris
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>