Shenzhen Emeet Technology HS105 Wireless Headset User Manual

Shenzhen Emeet Technology HS105 Wireless Headset

Package

Button display

Buttons and Functions

LED Indicators

Charging A

| Charging| Steady red
Fully charged| Steady green

Battery status A (indicated by charging LEDi

| Low/Critically low| Turns red
Medium| Turns yellow
Full| Turns green

Bluetooth status B

| Bluetooth conn- ected| Stays blue for 5s and then turns off
Bluetooth pairing| Flashes blue
Operational status C| Call in progress| Auto blue

USB Adapter — eMeet Adapter A300

To re-pair headset to USB dongle, please download eMeet Link application from www.emeet.ai/e– meetlink for settings.

Connection and Pairing

1. Connect to a PC
   Connect eMeet Adapter A300 to one of the PC’s USB ports.
   To re-pair headset to USB dongle, please download eMeetLink application for settings.

2. Pair a smartphone

3. Slide and hold the On/Of switch to the Bluetooth position until the LED flashes blue and voice guidance is heard.

4. Select eMeet HST05 Trom the ist of available Bluetooth devices on the Smart phone. 

Power On/Off

Slide the On/Off switch to the On or Off position to power the headset on or off.

Intelligent Wearing Detection

The headset utilizes embedded sensors to perform different operations based on whether or not the user is wearing it.
Auto Pause

• Take off the headset when listening to music, playing music will be paused automatically.
• Put the headset back on, music will be resumed automatically.
• When there is an incoming call, wear the headset, call will be answered automatically.

Enable/Disable Intelligent Wearing Detection
Download eMeetLink to Enable/Disable Intelligent Wearing Detection.

ANC Noise Reduction & Ambient Sound & Off Mode

The headset defaults to the off mode (ANC off, Ambient sound off), Short press to switch among 3 modes: ANC on/ANC off and Ambient Sound on/Ambient Sournd off. The act of switching modes doesn’t affect the calling and music playing function. And the speaker and microphone will not be muted.

Operational Status Indicator

During a call, the operational status indicator will turn blue automatically. To manually turn the operational status indicator on/off, press Volume+ and the Multi-function button at the same time.

Mute/Unmute Microphone

When using the headset during a call, rotate the microphone to mute/unmute it.

Multiple Call Handling

The headset can answer and handle multiple calls simultaneously.

button

| Answer the incoming call and keep the current call active
Two calls were answered, with one held and one active| Press the Multi- function

button

| between held call active call
New incoming call! when a call is ongoing| Hold the Multi-function

button

| Reject incoming call

Voice Guidance

Voice guidance are announcements that will guide you through set up, or will give you headphone status
updates (e.g, connection and battery status).
By default, the voice guidance function is enabled. You may download eMeetlLink to disable this function.

Reset
Resetting the headset clears the list of paired devices and resets all settings.
Hold Volume+ and Volume-at the same time for 10s to restart the headset.

Auto Shutdown
When the headset is powered on, but not being worn, they will automatically shutdown after 8 hours to conserve battery. To turn off this function, please download elMeetLink for settings.

Download Application

Download the eMeetLink PC desktop app for software updates and other custom settings.

Maintenance

• Store the headset in the accompanying pouch.
• To avoid shortened battery life and battery drainage, do not store the headset in hot or cold places (such as in an enclosed vehicle during summer or winter).
• The operating temperature of the headset is between 0°C and 35°C.
• Do not leave the headset unused and uncharged for extended periods, Charge the headset at least once every three months.

eMeet One (1) Year Limited Warranty

Limited one (1) Year Warranty with eMeet proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse. To protect your rights, please keep the proof of pur- chase. For service, please contact us:
+1888 959 5320 (EST 9:00am-5:00pm)
support@emeet.ai www.emeet.ai 

Safety Guide

Caution:
To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product  please contact qualifed maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully.
2. Please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product, use a dry cloth only.
6. Choking hazard- This product contains small parts. It is not suitable for children under the age of 3
7. Do not put this product near a heat source such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat.
8. Do not use this product if you must remain alert of your surroundings, for example, while driving a car or ridinga bike.
9. Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surhing
10. Please protect the power cable and audio cable. Do not step on or apply pressure on them. Do not pull on the product’s plug. socket or cable outlet.
11. It is recommended that users use the accessories that have been specified by the vendor.
12. Do not expose the battery to environments with excessive heat such as direct sunlight or sources of fire
13. Connect a power supply within the specified voltage range.
14. If a power cable that is connected to the product is not currently being used to charge the product please disconnect the power cable from the port and shut off the power Supply.
15. To repair the product please contact our professional maintenance personnel If the product is damaged, the product should be repaired. For example, if the power cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen

Regulatory Compliance Information

EU/UK Compliance (Wireless equipment only) Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. Corporation declares that the radio equipment is in compliance with <Directive 2014/53/EU/ RER 2017 (SI 2017/1206)>. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.ai/Certif- cate.html Excessive sound pressure from earphones and headphones can cause hearing loss.

Frequency: 2.4GHz (Bluetooth).
Maximum Power <100mW. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.

EU/UK Compliance (Corded equipment only)
Hereby, SHENZHEN EMEET
TECHNOLOGY CO, LTD. Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and Electromagnetic Compatibility Regulations 2016. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.ai/Certifncate.html.

CE
The suitable temperature for the product and accessories is 0-40C. Manufacture Name: SHENZHEN EMEET TECHNOLOGY CO., LTD. Manufacture Address: Unit 2C, Building A6, Guangming Science Park, Guanguang Road 3009, Guangming District, Shenzhen, China

FCC Compliance ( Wireless equipment only)

Federal Communication Commission (FCC) Radiation Exposure Statement. The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure condition without restriction.

FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this
equipment. Such modifhcations or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance (Wireless equipment only)

Radiation Exposure Statement:The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>