MAXIM LIGHTING 12244OFSBR Clover 4 Light Flush Mount User Manual
- June 8, 2024
- MAXIM LIGHTING
Table of Contents
**MAXIM LIGHTING 12244OFSBR Clover 4 Light Flush Mount User Manual
**
Before Getting Started
- Read the instructions carefully priorto assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damagethe components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damagethe product.
- Ensure that you have all required contents for complete assembly
- Take care when lifting. Assemble the product in closeproximity to whereyou intendto position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation! Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instructionsheet before assembly and using the product.
- Caution thereis a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner
- Periodically (every 90days) make sure that the screws are fully tightened
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting started ensure the package contains the following components:
-
WIRE NUTS
-
8/32 16 x 10MM H CAP NUT
- **MOUNTED PLATE
- WASHER
- **GREEN GROUND SCREW
- DIFFUSER
- **8/32 25MM L SCREW
- FLATE WASHER
- **FRAME + SHADE
- 20*10MM H FINIAL
Assembly Instructions
Read User Manual Online (PDF format)
Loading......