Hotpoint FFU3DW REFRIGERATOR/FREEZER COMBINATION Instruction Manual

Hotpoint FFU3DW REFRIGERATOR/FREEZER COMBINATION

Description of the appliance

Control panel

1. FREEZER OPERATION Button to regulate the temperature of the freezer compartment. The button is used with SUPER FREEZE Button to switch on/switch off the product by pressing both for 3 seconds.
2. SUPER FREEZE Button (rapid freezing) to freeze fresh food. Press the button for 3 seconds to switch on the product while it is switched off
3. SUPER FREEZE Blue light illuminates when the SUPER FREEZE button is pressed.
4. FREEZER TEMPERATURE Yellow light The temperature of the Freezer consists of 4 levels as indicated in serigraphy
5. FRIDGE TEMPERATURE Yellow light The temperature of the Fridge consists of 4 levels as indicated in serigraphy
6. SUPER COOL Blue light illuminates when the SUPER COOL button is pressed.
7. SUPER COOL Button (quick cool) to lower the temperature of the refrigerator compartment rapidly.
8. REFRIGERATOR OPERATION button to regulate the temperature of the refrigerator compartment.

• The indicator lights are also used to indicate an unusual temperature increase in the freezer compartment (see Troubleshooting).

Overall view

The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

1. Leveling FEET
2. FREEZER and STORAGE compartment
3. BOTTLE shelf*
4. Food Care Zone / Food Care Zone 0°C / Safe Defrost*
5. FRUIT and VEGETABLE bin*
6. Removable multipurpose SHELVES*
7. Control panel.
8. WINE RACK

• Varies by number and/or position, available only on certain models.

Installation

• Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, installation, and the care of the appliance.
• Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Leveling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220- 240V).
• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

1. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.
2. The cable must not be bent or compressed.
3. The cable must be checked regularly and replaced by authorised technicians only (see Assistance).
4. The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING: THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers

When replacing a faulty fuse, a 13amp ASTA-approved fuse to BS 1362 should always be used and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers

• If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the colored marking or the color that is embossed in words on the base of the plug.

Changing the plug

Removing the plug

If your appliance has a non-rewireable molded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units, etc. please ensure that either:

• The plug is replaced by a fused 13amp rewireable plug bearing the BSI mark of approval.
• The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

• Cut off and dispose of the supplied plug if it does not fit your socket.
• The cable should be cut as close as possible to the molded plug.
• Remove the fuse.

WARNING

• To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.
• Fitting a new plug

IMPORTANT: WIRES IN THE MAIN LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

• Green and Yellow: Earth
• Blue: Neutral
• Brown:  Live

As the colors of the wires in the mains lead may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

• Connect Green and Yellow wire to the terminal marked ‘E’ or colored Green and Yellow.
• Connect the Brown wire to the terminal marked ‘L’ or colored red or brown.
• Connect Blue wire to terminal marked ‘N’ or colored Black or Blue.
• If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives

• Low Voltage Equipment – 73/23/EEC & 93/68 EEC
• Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

Installation

• Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, installation, and the care of the appliance.
• Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Leveling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220- 240V).
• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorized technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

1. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.
2. The cable must not be bent or compressed.
3. The cable must be checked regularly and replaced by authorized technicians only (see Assistance).
4. The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

Start-up and use

Starting the appliance

• Before starting the appliance, follow the installation instructions (see Installation).
• Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.
• The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes.
• Varies by number and/or position, available only on certain models after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

1. Insert the plug into the socket and switch on the product using the appropriate button, ensure that the yellow refrigerator and freezer temperature lights illuminate
2. After a few hours, you will be able to put food in the refrigerator.
3. Press the SUPER FREEZE button (rapid freezing): the SUPER FREEZE indicator light will illuminate. Once the refrigerator has reached the optimal temperature, the indicator light goes out and you can begin food storage.

Chiller system

NO FROST

The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation. The system maintains an optimal humidity level in the compartment, preserving the original quality of the food, preventing the food from sticking together, and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers near the refrigerating back panel. ! Close bottles and wrap food tightly.

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION button to adjust the temperature (see Description).
• Press the SUPER COOL button (rapid cooling) to lower the temperature quickly. For example, when you place a large number of new food items inside a fridge the internal temperature will rise slightly. The function quickly cools the groceries by temporarily reducing the temperature until it reaches the ideal level.
• Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.
• To close the refrigerator door to pay attention to the vertical bracket position (see figure)

SHELVES: Due to the special guides the shelves are removable and the height is adjustable, allowing easy storage of large containers and food.

FRUIT and VEGETABLE bin

The salad crispers fitted inside the fridge have been specially designed for the purpose of keeping fruit and vegetables fresh and crisp. Open the humidity regulator (position B) if you want to store food in a less humid environment like fruit, or close it (position A) to store food in a more humid environment like vegetable.

TEMPERATURE Indicator light: to identify the coldest area in the refrigerator.

1. Check that OK appears clearly on the indicator light (see diagram).
2. If the word “OK” does not appear it means that the temperature is too high: set a lower temperature and wait approximately 10 hours until the temperature has been stabilised.
3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting.

Using the freezer to its full potential

• Use the FREEZER OPERATION button to adjust the temperature (see Description).
• Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).
• Fresh food that needs to be frozen must not come into contact with food that has already been defrosted.
• Do not place glass bottles that contain liquids, and which are corked or hermetically sealed in the freezer because they could break.
• The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4).
• To freeze (if the freezer is already operating): press the rapid freezing SUPER FREEZE button (corresponding blue indicator light illuminates), insert the food and close the door. The function is disabled automatically after 24 hours or when optimal temperatures have been reached (indicator light goes out).

1. Do not store food too large in the upper freezer drawer if is present the ‘Ice Device”.
2. Varies by number and/or position, available only on certain models.
3. Do not open the door during freezing.
4. If there is a power cut or malfunction, do not open the freezer door.
5. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

Hidden Shelf

• There is a wire shelf inside the freezer compartment located between the upper and lower freezer baskets. To Access the wire shelf, remove the basket of the upper freezer door. The wire shelf may be removed out of the freezer by holding it up from the front edge.
• It is recommended to use the wire shelf only for long-term storage.

ICE DEVICE

After pouring water in the special ice cups, place them in their places in the ice device. After about 2 hours, the ice cubes will be ready. In order to get the ice cubes, it will be sufficient to turn the two buttons to the right. The ice cubes will fall in to the tray below, ready to be used.

• If you need more storage space, the ICE DEVICE may be taken out by pushing the nail on the top of the ice device.

Food Care Zone

Area dedicated to the storage of fresh food, such as meat and fish. Thanks to the low temperature inside the compartment, the Food Care Zone extends the period of time for which the food can be stored, keeping it fresh for up to a week.

Food Care Zone 0°C / Safe Defrost

A compartment designed to keep delicate food such as meat and fish fresh. The low temperature in the compartment (-2 / +3° C) makes it possible to store the food for up to one-week tests performed on meat products – without changing its nutrients, appearance, and flavor.

The compartment is also very suitable for healthy food defrosting, as low- temperature defrosting prevents any proliferation of microorganisms while protecting its taste and organoleptic properties. It is not suitable for fruit, vegetables, and green salad. But it can be used for fresh or very fresh dairy products and milk, stuffed fresh pasta, and even cooked food or leftovers.

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1. Press the FREEZER OPERATION Button and SUPER FREEZE Button for 3 seconds to switch off the product
2. pull the plug out of the socket

! If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation insert the plug into the socket, press the FREEZER OPERATION and SUPER FREEZE button, and set the FREEZER OPERATION button to the desired value. To disconnect the appliance, follow point 1 and 2.

Cleaning the appliance

• The external and internal parts, as well as the rubber seals, may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.
• During the cleaning of the slide rails for the drawers in the freezer compartment, it may happen that the automatic drawer closure mechanism is deactivated. To reactivate it, simply close the drawer a little more forcefully than is usually necessary.

Avoiding mold and unpleasant odors

• The appliance is manufactured with hygienic materials which are odor free. In order to maintain an odour-free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.
• If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Care function

The I Care function can be enabled to optimize energy consumption. Press and hold down the SUPERCOOL and REFRIGERATOR OPERATION buttons simultaneously for at least 6 seconds to enable this function. On enabling the function, 4 indicator lights will go on for 2 seconds: SUPER COOL light, SUPER FREEZE light, and two temperature lights – one for the refrigerator and one for the freezer. After 5 seconds the interface will enter the energy-saving mode and the indicator lights will go off. The interface stays off even when the door is opened. Just press any button to switch it on again. Press the adjustment buttons to change the temperature. Consumption will be optimized 48h after the function was enabled. To disable the I Care function, switch off the product (see description). The product can be switched on again for normal operation.

In humid environments, when the I Care function is enabled, slight condensation may form on the doors; normal operating conditions are restored when the function is disabled.

Replacing the light bulb

Thanks to the powerful light it emits, the new LED lighting system offers a clear view of all foods, with no shadowy areas. If the LED needs to be replaced, please contact the Technical Assistance Service.

Precautions and tips

The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives

• 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
• 89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; – 2002/96/CE.

General safety

• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist hands and feet.
• Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.
• Is not sufficient to switch-off of the product to eliminate all the electrical connections.
• In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electricalequipment – other than the type recommended by the manufacturer – inside the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your mouth.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

• Observe local environmental standards when disposing of packaging material for recycling purposes.
• The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
• Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce theimpact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose ofthe appliance it must be separately collected.
• Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.
• Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.
• Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly.
• If circulation is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Any indicator lights do not illuminate

• If the function I Care is not active (see section), the plug has not been inserted into the electrical socket, or is not far enough to make contact, or there is no power in the house.

The motor does not start

• The appliance comes with a motor protection control (see Start-up and use).

The indicator lights are on but the light is dim

• Pull out and reverse the plug before putting it back in the socket.

The alarm sounds

• The refrigerator door has remained open for more than two minutes (the buzzer will stop sounding when you shut the door) or the correct switching-off procedure was not followed (see Maintenance).

The alarm sounds and the two blue indicator lights flash

• The temperature in the freezer is too high. Check the quality of the food products and dispose of them if necessary.

The alarm sounds and the two blue indicators and green one lights flash

• The temperature in the freezer has reached a dangerous level. The food must be disposed immediately.

b/c) In both these cases, the freezer will maintain a temperature of about 0°C so that the food does not re-freeze. To turn off the acoustic signal open and close the refrigerator door. restore normal operation product should be switched off and switched on by buttons from control panel (See the description)

The refrigerator and the freezer do not cool well

• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The refrigerator or the freezer has been over-filled.

The food inside the refrigerator is beginning to freeze

• The temperature is not adjusted properly (see description)
• The food is near the back inside the wall of the refrigerator.

The motor runs continuously

• The SUPER FREEZE button has been pressed (rapid freezing): the blue SUPER FREEZE light is on (see Description).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.

The appliance makes a lot of noise

• The appliance has not been installed on a level surface (see Installation).
• The appliance has been installed between cabinets that vibrate and make noise.
• The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

Guarantee

12 months Parts and Labour Guarantee

Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.

This guarantee is subject to the following conditions

• The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions.
• The appliance is used only on the electricity or gas supply printed on the rating plate.
• The appliance has been used for normal domestic purposes only.
• The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorized by us.
• Any repair work must be undertaken by us or our appointed agent.
• Any parts removed during repair work or any appliance that is replaced become our property.
• The appliance is used in the United Kingdom or the Republic of Ireland.

The guarantee does not cover

• Damage resulting from transportation, improper use, neglect, or interference or as a result of improper installation.
• Replacement of any consumable item or accessory. These included but were not limited to: plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers, and filters.
• Replacement of any removable parts made of glass or plastic.

THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED ON COMMERCIAL OR NON-DOMESTIC PREMISES.

5 Year Parts Guarantee

Hotpoint also offers you a free 5-year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorized engineers. There will be a charge for our engineer’s time. To activate the extra parts warranty on your appliance, simply call our registration line on 0870 6092094 (Republic of Ireland 01 230 0800)

Extended Guarantees

We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills for the life of your policy. To find the ideal plan for you please call our advice line on 08709 088 088 (Republic of Ireland 01 230 0233).

Free Helpdesk Service

We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership. Simply call our Hotypoint Service Hotline on 08709 066 066 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to call.

After Sales Service

No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer.

Contact Information

Hotpoint Service

We are the largest service team in the UK and Ireland offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.

• UK: 08709 066 066
• Republic of Ireland: 0818 313 413
• www.hotpointservice.co.uk

Please note: Our advisors will require the following information:

• Model number: ____
• Serial number: ____

Parts and Accessories

We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life.

• UK: 08709 066 066
• Republic of Ireland: 0818 313 413
• www.hotpointservice.co.uk

Appliance Registration

We want to give you additional benefits of Hotpoint ownership. To activate your free 5-year parts guarantee you must register your appliance with us.

• UK: 0870 6092094
• Republic of Ireland: 01 230 0800
• www.hotpointservice.co.uk

Indesit Company UK Ltd

• Morley Way, Peterborough, PE2 9JB
• Indesit Company Unit 49 Airways Industrial Estate, Dublin 17

Recycling and Disposal Information

As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimize material wastage.
Please dispose of packaging and old appliances carefully. To minimize the risk of injury to children, remove the door, plug, and cut the main cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged into the main socket, and the door cannot be locked shut.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5-YEAR PARTS GUARANTEE ON 08448 24 24 24

References

• Official Hotpoint Appliance Service Repair - Hotpoint

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>