CBG 334430877354 Automated Shades Instructions
- June 3, 2024
- CBG
Table of Contents
334430877354 Automated Shades
Instructions Manual
UPDATED SAFETY INSTRUCTIONS FOR AUTOMATED SHADES
Any accessible electrical wire must be less than 22 cm in overall length. Any
accessible wires that is a power source for automated shades MUST meet one of
the following requirements:
Option 1
The accessible electrical wire must be shrouded with a rigid cover so that the
wire is shielded in such a way that it cannot be touched when it is installed.
The shroud/rigid cover makes the electrical wire inaccessible.
Option 2
The accessible electrical wire must be installed by stapling/anchoring it at
intervals of less than 22 cm, and the staples/anchors cannot be removable with
35 Nm of force, or less. The stapling/anchoring makes the electrical wire
inaccessible.
Option 3
A combination of option 1 and option 2; the use of a shroud/rigid cover and
stapling/anchoring the electrical wires at intervals of less than 22cm make
the electrical wire unaccessible.
WARNING STRANGULATION HAZARD –
Young children can be strangled by cords.
Immediately remove this product if a cord longer than 22 cm or a loop
exceeding 44 cm around becomes accessible. Rev 7/21 Print 7/21