Sudio Femtio Wireless Speakers – Portable, IPX6 Water Protection, Dual Play, Microphone-Complete Features/User Instruction

Sudio Femtio Wireless Speakers – Portable, IPX6 Water Protection, Dual

Play, Microphone

Specifications

• Product Dimensions
  7.68 x 3.78 x 3.23 inches

• Item Weight
  1.49 pounds

• Batteries
  1 Lithium Metal batteries

• Connectivity Technology
  Bluetooth

• Brand
  Sudio

Introduction

Small but mighty, the Sudio Femtio speaker produces a clear, easy-to-hear sound. It travels anywhere thanks to its compactness and its waterproof IPX 6 ingress protection grade. For comprehensive aural coverage, use the Dual Pairing feature to connect two Sudio Femtio speakers to one device. since sharing music is its intended purpose. Congratulations on receiving your new Femtio! Use this guide to learn about pairing Femtio with your preferred device, charging the battery, and restoring the speaker to its factory settings.

What’s in the box

• Femtio speaker
• Type-C USB-cable
• Owners manual

Before getting started

The speaker will likely have some existing battery charge, however it is recommended to fully charge Femtio before using it for the first time.

Turning Femtio on or off
Press (hold) the power button for two seconds to turn on/off your Femtio.

Pairing with a device

Jump to complete guide
Femtio will automatically be in pairing mode after having been turned on by pressing the power button for two seconds. The light on the far right will start flashing white quickly.

Open the Bluetooth settings on your device and wait for Femtio and the device to locate each other, then select  Sudio Femtio when it appears in the list. Once connected, the light will flash white every 3 seconds (in some models the light is turned off).

Charging the battery

Femtio has one built-in battery inside the speaker. Femtio is charged with a Type-C USB cable. It is recommended to use the Sudio Type-C USB cable that’s included in the package, but the charging case may be compatible with third- party Type-C USB cables as well. There are five LED lights right above the ‘SUDIO’ logo that indicates the speaker’s battery remaining level. The four LED lights on the left side indicate the battery status of your Femtio.

Restoring Femtio to factory settings

If Femtio is behaving unexpectedly or you simply wish to restore it to its original settings, then you can reset it. You may then proceed with pairing Femtio again.

Music/video playback

• Press (hold) the ‘+’ button for 2 seconds to jump forward to the next song
• Press (hold) the ‘-’ button for 2 seconds to go back to the previous song

Volume

• Press the button labeled (+) once to increase the volume and repeat it until you reach your preferred volume.
• Press the button labeled (-) once to decrease the volume and repeat it until you reach your preferred volume.

Incoming phone calls

You can answer the incoming call using either your phone or Femtio.

• Press the pause/play button onceto answer/end the phone call from Femtio
• Press (hold) the pause/play button for 2 seconds to reject a phone call
• Press (hold) the pause/play button for 2 seconds while answering the callto switch the audio from your phone to the speaker and vice versa,

Charging and playtimes

The speaker can be used for approximately 14 hours on one charge. The battery takes approximately 4 hours to fully charge. Femtio also supports quick charge, restoring 1 hour of playtime after 15 minutes of charging and 12 hours of playtime after 2 hours of charging.

Charging methods

Femtio can only be charged with a Type-C USB cable. We recommend using the Sudio cable included in the package, however, other third-party Type-C USB cables may be compatible too. ****

Frequently Asked Questions

How is the Sudio Femtio charged?
You may listen to music for roughly 14 hours on a full charge of the speaker. The USB-C port behind the speaker is used for charging. The box includes a USB-C to USB-A cable. It features a built-in microphone, so you may use it to answer calls as well.

To reset my Bluetooth speaker, how can I?
You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

Why won’t my wireless speaker function?
Both devices’ volumes should be turned up. Ensure that the music is playing on your source device. Move the Bluetooth speaker as far away from metal objects and other potential interference-causing gadgets as you can. Ensure that nothing is plugged into the wireless speaker’s AUDIO IN port.

Why can’t Bluetooth locate devices?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

How can I stop Sudio Fem?
The majority of the time, disconnect Sudio Fem from all previous connected devices. usually accomplished by clicking the “Forget” button. Remove the charging case from the two earbuds. By pressing the touch buttons on each earbud until the red light appears on both, you can manually turn them both off.

How do you activate pairing mode on speakers?
The (power) PAIRING button must be pressed and held down until beeps are heard and the white (BLUETOOTH) indicator starts to flash rapidly. It switches to pairing mode. To get the Bluetooth device to recognise the speaker, couple it with a Bluetooth device.

Has Sudio ever had an app?
If you’d like to use your smartphone, Sudio offers a dedicated app that you can download to control every feature of the E2. The app offers a limited EQ with a few presets, noise-canceling, ambient mode, and Dirac spatial audio options.

HOW CAN I TRACK MY ORDER?
**** You will receive a shipment confirmation when your order has been dispatched from the warehouse. The email contains your tracking number and a link where you can follow the progress.

How is Sudio cleaned?
When cleaning the earphones and/or case, use just a cloth that is marginally damp. In order to prevent damaging the charging connectors, you can also gently clean the earphones and the interior of the case using a small brush or cotton swab (copper pins). Avoid using chemicals or alcohol since they can harm the earbuds’ rubber coating and casing.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>