Lenovo QLogic 8 Gb and 4-8 Gb Intelligent Pass-thru Modules User Guide
- June 3, 2024
- Lenovo
Table of Contents
QLogic 8 Gb and 4-8 Gb Intelligent Pass-thru Modules
User Guide
QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter
Product Guide (withdrawn product)
The QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter
provide seamless integration of a BladeCenter solution into existing Fibre
Channel storage networks using N_Port ID Virtualization (NPIV) technology.
Each module concentrates multiple blade servers into the external ports, which
in turn connect to external Fibre Channel switches that support NPIV. The
pass-thru module presents one or more blade servers per port to the fabric.
The module expands the fabric, but unlike a full fabric switch, it does not
count against the fabric domain.
Figure 1 shows the QLogic 4/8 Gb Intelligent Pass-thru Module. The 8 Gb module
has an identical port configuration.
Figure 1. QLogic 4/8 Gb
Intelligent Pass-thru Module for BladeCenter
Did you know?
The QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules are the latest Fibre
Channel NPIV switching option for the BladeCenter. The switch connects to the
midplane directly, without having to use cables or small form-factor pluggable
(SFP) modules. By eliminating these components for up to 14 servers, the
resulting savings alone cover the BladeCenter chassis investment.
QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter
(withdrawn product) > Lenovo
Press
QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter
(withdrawn product)
Part number information
Table 1 shows the part numbers to order these modules.
Table 1. The part number and feature code for ordering
Description | Part number | Feature code |
---|---|---|
QLogic 8 Gb Intelligent Pass-thru Module for BladeCenter | 44X1907* | 5482 |
QLogic 4/8 Gb Intelligent Pass-thru Module for BladeCenter | 88Y6410* | A24D |
-
Withdrawn from marketing
Feature code 5482 A24D
Each part number includes the following items:- One QLogic 8 Gb Intelligent Pass-thru Module, or one QLogic 4/8 Gb Intelligent Pass-thru Module
- The Documentation CD
- The IBM Important Notices document
Each switch comes without small form-factor pluggable plus (SFP+) modules, and
they must be ordered additionally.
Table 2 lists the part numbers that are supported.
Table 2. Supported SFPs and SFPs+ for the QLogic 8 Gb and 4/8 Gb Intelligent
Pass-thru Modules
Description | Part number | Feature code |
---|---|---|
IBM 8 Gb SFP+ SW Optical Transceiver | 44X1964 | 5075 |
4 Gbps SW SFP Transceiver | 39R6475 | 4804 |
4 Gbps shortwave SFP transceiver pair | 26K7941 | 2410 |
4 Gbps SW SFP Transceiver 4 Pack | 22R4897 | 2414 |
4 Gbps SW SFP Transceiver | 22R4902 | 2410 |
Features
The QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules have the following features:
- Six external autosensing Fibre Channel ports (2, 4, or 8 Gbps for 8 Gb SFP+ transceivers, and 1, 2, or 4 Gbps for 4 Gb SFP transceivers) that operate as TF_Ports (Transparent Fabric Ports) at a maximum speed of 8 Gbps
- The QLogic 8 Gb Intelligent Pass-thru Module has 14 internal Fibre Channel ports that operate as TH_Ports (Transparent Host Ports) at 2, 4, or 8 Gbps depending on FC expansion cards installed into blades
- The QLogic 4/8 Gb Intelligent Pass-thru Module has 14 internal Fibre Channel ports that operate as TH_Ports (Transparent Host Ports) at 2, 4, or 8 Gbps depending on FC expansion cards installed into blades and the I/O module bays the module is installed in:
- When installed in an MSIM (BladeCenter H only) or MSIM-HT (BladeCenter HT only), the internal ports operate at up to 8 Gbps
- When installed in standard I/O module bays 3 or 4, the internal ports operate at up to 4 Gbps
- When installed in a BladeCenter T chassis, the internal ports operate at 2 Gbps
- Two internal full-duplex 100 Mbps Ethernet interfaces
- N_Port ID Virtualization (NPIV) functionality
- Power-on self-test diagnostics and status reporting
- Support for Non-Disruptive Code Load Activation (NDCLA)
- Registered State Change Notification (RSCN)
- Support for standards-based FC-SW2 interoperability
- Error detection
- Cyclic redundancy check (CRC)
- 8-byte and 10-byte conversion
- Parity
- Long frame and short frame
- D_ID mismatch
- S_ID mismatch
- Frame bundling
- No frame bundling (frames are intermixed from different source ports)
- Soft lockdown (the I/O module waits for the sequence to be completed or a gap in the frame traffic to occur before it services requests from a different port)
- Configurable Fabric Address Notification (FAN)
- Support for up to 239 switches depending on configuration
- 8 Gb switch fabric aggregate bandwidth: 320 Gbps at full duplex
- Maximum frame size: 2148 bytes (2112 byte payload)
- Nonblocking architecture to prevent latency
- Support for Call Home function
- Support for Domain Name Service (DNS)
- Support for Internet protocol (IP) Version 6
- Support for Internet Protocol security (IPsec)
- Support for separate trap community strings for each trap address
- Support for Simple Network Management Protocol (SNMP) Version 3
- Support for vital product data (VPD)
- Optional small form-factor pluggable plus (SFP+) modules
Note: Neither the QLogic 8 Gb Intelligent Pass-thru Module nor the QLogic
4/8 Gb Intelligent Pass-thru Module can be upgraded to a full-fabric switch
module.
The following software feature comes with each module:
- QuickTools Web interface
Each module supports the following fabric management (all management connections go through the management module):
- Web interface through QuickTools
- Command-line interface (CLI) through the Telnet program
- Enterprise Fabric Suite 2007 application
- Switch SNMP agent, which enables a network management workstation to receive configuration values, traffic information, and FC failure data through SNMP and the Ethernet interface
Supported BladeCenter chassis and expansion cards
The QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules are supported in
the BladeCenter chassis as listed in Table 3. The I/O module fits in a
standard I/O bay (bays 3 & 4) and, with the addition of the MultiSwitch
Interconnect Module (MSIM) in the BladeCenter H and HT, can also fit in a
high-speed I/O bay (bays 7-10). Installing both QLogic 8 Gb and 4/8 Gb
Intelligent Pass-thru Module in one chassis is not supported.
Table 3. BladeCenter chassis that support the QLogic 4/8 Gb Intelligent Pass-
thru Module
I/O module| Part number| Blade Center S| Blade Center E| Blade Center H| Blade
CenterT| MSIM| MSIM-HT
---|---|---|---|---|---|---|---
QLogic 8 Gb Intelligent Pass-thru Module| 44X1907| Y| Y| Y| Y| Y| Y
QLogic 4/8 Gb Intelligent Pass-thru Module| 88Y6410| Y| Y| Y| Y| Y| Y
Speed maximums with the QLogic 8 Gb Intelligent Pass-thru Module:
- When the I/O module is installed in an MSIM (BladeCenter H) or MSIM-HT (BladeCenter HT), or switch bays 3 or 4 of a BladeCenter E, S, H or HT chassis, both the internal ports and external ports operate at speeds up to 8 Gbps.
- When the I/O module is installed in switch bays 3 or 4 of a BladeCenter T chassis, the internal ports operate at 2 Gbps, and the external ports operate at speeds up to 8 Gbps.
Speed maximums with the QLogic 4/8 Gb Intelligent Pass-thru Module:
- When the I/O module is installed in an MSIM (BladeCenter H) or MSIM-HT (BladeCenter HT), both the internal ports and external ports operate at speeds up to 8 Gbps.
- When the I/O module is installed in switch bays 3 or 4 of a BladeCenter E, S, H or HT chassis, the internal ports operate at speeds up to 4 Gbps, and the external ports operate up to 8 Gbps.
- When the I/O module is installed in switch bays 3 or 4 of a BladeCenter T chassis, the internal ports operate at 2 Gbps, and the external ports operate at speeds up to 8 Gbps.
The QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules support the expansion
cards listed in Table 4. Table 4 also lists the chassis bays in which the
switch module must be installed when used with each expansion card.
Table 4. Expansion card support and Chassis I/O bay support
- The internal ports of the QLogic 4/8 Gb Intelligent Pass-thru Module operate at speeds up to 4 Gbps (with BladeCenter T, the maximum is 2 Gbps)
Popular configurations
Figure 2 shows the QLogic 8 Gb Intelligent Pass-thru Module that is installed
in standard I/O bays in the BladeCenter chassis. The chassis is connected to
the IBM System Storage SAN40B-4 Fibre Channel fabric switch. The servers in
the chassis each have compatible CFFv or CIOv Fibre Channel expansion cards.
Tip: Had the QLogic 4/8 Gb Intelligent Pass-thru Module been used in this
configuration, the internal ports of the Pass-thru Module operate at 4 Gbps.
Figure 2. BladeCenter connected to an external fabric switch using the QLogic
8 Gb Intelligent Pass-thru Module
Table 5 lists the parts that are used in this configuration.
Table 5. Components used as shown in Figure 2
Diagram reference| Part number / Machintype| Description|
Quantity
---|---|---|---
1| Varies| BladeCenter HS22, HS21, or another supported server| 1 to 14
2| Varies| Supported CIOv or CFFv expansion card (see Table 4)| 1 per server
3| Varies| Supported BladeCenter chassis (See Table 3)| 1
4| 44X1907| QLogic 8 Gb Intelligent Pass-thru Module| 1 or 2
5| 44X1964| IBM 8 Gb SFP+ SW Optical Transceiver| Up to 12
6| 2498-B40| IBM System Storage SAN40B-4 Fibre Channel fabric
switch| 1
This configuration also requires cabling between the chassis and the fabric
switch. (The cable part numbers are not listed in the table.)
Connectors and LEDs
The front panel of the QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules
contain the following components, as shown in Figure 3:
- Information LEDs display the status of the I/O module and its network connections. Six external Fibre Channel ports to connect Fibre Channel devices and switches.
- These ports are labeled 0, 15, 16, 17, 18, and 19 (from top to bottom) on the I/O module.
Figure 3. The front panel of the I/O module
Table 6 lists the LEDs on the front panel and their meanings.
Table 6. LEDs on the front panel
LED name | LED description |
---|---|
OK | This green LED is at the top left of the I/O module on the front panel and |
indicates that the module is working properly.
! (I/O module fault)| This amber LED is at the top right of the I/O module on
the front panel. This LED indicates that the I/O module has a fault. If the
I/O module fails the POST, this fault LED is lit.
External port logged-in (LOG)| There are six green external port logged-in
(LOG) LEDs. When one of these LEDs is lit, it indicates that there is a
connection (or link) to a device on that port.
External port activity (TX/RX)| There are six green external port activity
(TX/RX) LEDs. When one of these LEDs flashes, it indicates that data is being
received or transmitted (that is, activity is occurring) on that port. The
flash frequency is proportional to the amount of traffic on that port.
External port fault (!)| There are six amber external port fault (!) LEDs.
When an external port fault LED is lit, it indicates that the external port
has failed the internal, external, or online port diagnostics tests.
Operating environment
The environment has the following temperature and altitude requirements:
- Operating:
- 10 – 52 °C (50 – 125 °F) at an altitude of 0 to 914 m (0 to 3,000 ft)
- 10 – 49 °C (50 – 20 °F) at an altitude of 0 to 3,000 m (0 to 10,000 ft)
- Non-operating:
- 40 – 65 °C (-40 – 149 °F) at an altitude of 0 to 12,000 m (0 to 39,370 ft)
The environment has the following humidity level requirements:
- Operating: 8% to 80%, non-condensing
- Non-operating: 5% to 80%, non-condensing
Related publications
For more information, see the following documents:
-
QLogic 8 Gb Intelligent Pass-thru Module and 20-port 8 Gb SAN Switch Module Installation and User’s Guide
http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5079302 -
IBM US Announcement Letter BladeCenter support options expand with a new selection of higher capacity QLogic products
http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS108-862 -
BladeCenter Interoperability Guide http://lenovopress.com/bcig
-
BladeCenter Products and Technology, SG24-7523 http://lenovopress.com/sg247523
Related product families
Product families related to this document are the following:
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only the Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other
product, program, or service. Lenovo may have patents or pending patent
applications covering the subject matter described in this document. The
furnishing of this document does not give you any license to these patents.
You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimers of express or implied warranties in
certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result
in injury or death to persons. The information contained in this document does
not affect or change Lenovo product specifications or warranties. Nothing in
this document shall operate as an express or implied license or indemnity
under the intellectual property rights of Lenovo or third parties. All
information contained in this document was obtained in specific environments
and is presented as an illustration. The result obtained in other operating
environments may vary. Lenovo may use or distribute any of the information you
supply in any way it believes appropriate without incurring any obligation to
you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this
Lenovo product, and use of those Web sites is at your own risk. Any
performance data contained herein was determined in a controlled environment.
Therefore, the result obtained in other operating environments may vary
significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this
document should verify the applicable data for their specific environment.
© Copyright Lenovo 2022. All rights reserved.
This document, TIPS0694, was created or updated on June 15, 2011.
Send us your comments in one of the following ways:
Use the online Contact us review form found at:
https://lenovopress.lenovo.com/TIPS0694
Send your comments in an e-mail to:
comments@lenovopress.com
This document is available online at
https://lenovopress.lenovo.com/TIPS0694.
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo
in the United States, other countries, or both. A current list of Lenovo
trademarks is available on the Web at
https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other
countries, or both: Lenovo® BladeCenter Interoperability Guide BladeCenter®
Other company, product, or service names may be trademarks or service marks of
others.
QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter
(withdrawn product)
References
- IBM Support
- BladeCenter Interoperability Guide (withdrawn product) > Lenovo Press
- IBM BladeCenter Products and Technology (withdrawn product) > Lenovo Press
- Blade Storage Modules > Lenovo Press
- Embedded SAN Switches > Lenovo Press
- QLogic 8 Gb and 4/8 Gb Intelligent Pass-thru Modules for BladeCenter Product Guide (withdrawn product) > Lenovo Press
- Copyright and Trademark Information | Lenovo US | Lenovo US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>