UNITRON GROUP 4605 3-Way dSCR Smart Splitter User Manual
- June 4, 2024
- UNITRON GROUP
Table of Contents
User Manual
3-way SCR Smart Splitter
Ref. 4605
No part of this manual may be copied, reproduced, transmitted, transcribed or
translated into any language without permission.
Unitron reserves the right to change the specifications of the hardware and
software described in these manuals at any time.
Unitron cannot be held liable for any damages resulting from the use of this
product. Specifications are subject to change without notice. 11/21
© Unitron – Frankrijklaan 27 – B-8970 Poperinge – Belgium
T +32 57 33 33 63 F +32 57 33 45 24
email [email protected]
www.unitrongroup.com
PRODUCT DESCRIPTION
Standard splitters can give collisions when two commands come at the same time or when one of the set-top boxes uses a permanent high voltage. A smart splitter captures the commands of the different set-top boxes and serializes them to guarantee no collisions happen.
- Indoor housing
- 3-way smart splitter for dSCR application
- Supports the following standards: EN50494 & EN50607
- No power adapter needed
- Buffers and sends out the different command signals
Bracket mounting
INSTALLATION OF THE HARDWARE
TECHNICAL SPECIFICATIONS
4605
Inputs| –| 1
Outputs| –| 3
Frequency range| MHz| 5-2150
Insertion loss| dB| 9
Return loss in / out| dB| > 10
DC power pass| mA| 50 max.
Input voltage| VDC| 12 min. / 20 max.
DiSEqC| –| DiSEqC compliant
SCR standard| –| EN50494 – EN50607
Dimensions| mm| 114 x 56 x 35
SAFETY INSTRUCTIONS
Read these instructions carefully before connecting the unit
To prevent fire, short circuit, or shock hazards:
- Do not expose the unit to rain or moisture.
- Install the unit in a dry location without infiltration or condensation of water.
- Do not expose it to dripping or splashing.
- Do not place objects filled with liquids, such as vases, on the apparatus.
- If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of overheating:
- Install the unit in a well aery location and keep a minimum distance of 15 cm around the apparatus for sufficient ventilation
- Do not place any items such as newspapers, tablecloths, or curtains, on the unit that might cover the ventilation holes.
- Do not place any naked flame sources, such as lighted candles, on the apparatus
- Do not install the product in a dusty place
- Use the apparatus only in moderate climates (not in tropical climates)
- Respect the minimum and maximum temperature specifications
To avoid any risk of electrical shocks:
- Connect apparatus only to socket with protective earth connection.
- The mains plug shall remain readily operable
- Pull out the power plug to make the different connections of cables
- To avoid electrical shock, do not open the housing of the adapter.
Maintenance
Only use a dry soft cloth to clean the cabinet.
Do not use solvent
** For repairing and servicing refer to qualified personnel.
Dispose according your local authority’s recycling processes**
CONDITIONS OF WARRANTY
Unitron N.V. warrants the product as being free from defects in material and
workmanship for a period of 24 months starting from the date of production
indicated on it. See note below.
If during this period of warranty the product proves defective, under normal
use, due to defective materials or workmanship, Unitron N.V, at its sole
option, will repair or replace the product. Return the product to your local
dealer for reparation
THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND WORKMANSHIP AND
DOES NOT COVER DAMAGE RESULTING FROM:
- Misuse or use of the product out of its specifications.
- Installation or use in a manner inconsistent with the technical or safety standards in force in the country where the product is used
- Use of non-suitable accessories (power supply, adapters…).
- Installation in a defective system.
- External causes beyond the control of Unitron N.V. such as drops, accidents, lightning, water, fire, improper ventilation…
THE WARRANTY IS NOT APPLIED IF
- Production date or serial number on the product is illegible, altered, deleted, or removed.
- The product has been opened or repaired by a non-authorized person.
NOTE
Date of production can be found in the product’s serial number code. The
format will either be “YEAR W WEEK” (e.g., 2018W01 = year 2018 week 1) or
“YYWW” (e.g., 1847 = year 2018 week 47).
UNITRON NV
Frankrijklaan 27 B-8970 Poperinge Belgium
T +32 57 33 33 63
F +32 57 33 45 24
[email protected]
www.unitrongroup.com