PYLE-PRO PPHP885A 400 Watts 8-Inch Powered User Guide
- June 4, 2024
- Pyle
Table of Contents
PYLE-PRO PPHP885A 400 Watts 8-Inch Powered
Specifications
-
BRAND: Pyle
-
MODEL NUMBER: PPHP885A
-
SPEAKER TYPE: Woofer
-
SPEAKER MAXIMUM OUTPUT POWER: 200 Watts
-
IMPEDANCE: 1 Ohm
-
AC: 115V-230V
-
FREQUENCY RESPONSE: 45HZ-20KHZ
-
POWER OUTPUT: 200Watts Rms
-
PEAK POWER: 400Watts\
-
CROSSOVER FREQUENCY: 3.0KHZ
-
SPEAKER STAND MOUNT: 35MM
-
ITEM WEIGHT: 19.05 pounds
-
PRODUCT DIMENSIONS: 11.5 x 13.5 x 19 inches
Introduction
The PPHP885A is a powered, wide-coverage, two-way loudspeaker with 400 watts of full-range, distortion-free power that spans the whole audio spectrum. It drives everything in one amplified cabinet, from a thunderous bass to a chirpy high-end. To handle both speech and any electronic instrument simultaneously, this speaker has two XLR, one 14-inch, and a normal RCA mic input, each with its own volume control. The bass and treble controls let you customize the sound to your liking. There is a 35mm pole mount socket for a wide range of uses.
Ideal for bands and DJs to use as their primary PA or instrument amplifier so they can rock the crowd wherever they go, whether it’s a club or a party.
Additionally, these speakers have a handle for easy mobility, so you’ll always be prepared for the next gig. Additionally, your home will include pristine acoustics as a monitor. You may rest assured that your sound is safe since the 8-Inch subwoofer and 1-Inch modern titanium drivers are shielded by a metal grill.
HOW TO CONNECT
When you press the BT/Line button switch on the front panel, the unit will immediately be prepared to pair with your external device once you hear the voice “POWER ON” and “PAIRING.”
HOW TO CONNECT TO TV
You may configure Bluetooth by turning on the TV and navigating to the Settings menu. Turning on the speaker establishes it as a pairing device. Wait as long as you can after the TV recognizes the new device.
HOW TO KNOW IF SPEAKER IS CHARGING
When the battery is charging, the RECHARGE indication glows red, flashes when it is almost full, and turns off when it is fully charged. You can listen to music while charging, and the RECHARGE indicator will flash with the current consumption to show the charge speed.
Frequently Asked Questions
How reliable are Pyle power speakers?
Despite being an inexpensive speaker, it has pretty nice quality, a built-in microphone, and great sound for a backyard gathering!
The caliber of Pyle Audio?
It works well, is loud, and is simple to use. It has a small buzz at low volumes that my old receiver didn’t have; else I would have given it five stars. Few radio stations are picked up, however as I use the aux more, this is not a problem.
Can I use two Bluetooth speakers to play music?
Android users must go to Bluetooth Settings and pair each Bluetooth speaker or set of headphones individually. After connecting, click on Advanced Settings by tapping the three-dot icon on the right. If the “dual audio” option is not already selected, switch it on. Users should be able to connect to two devices at once thanks to this.
Exactly why won’t my Pyle speaker connect?
The speaker may need to be unpaired, then repaired with your device. Before starting the connecting process, make sure the Bluetooth Speaker is ON.
Pyle: a reliable amplifier?
The amplifier has worked flawlessly. It is simple to use, and the responsiveness is excellent. It sounds great.
Can I directly connect speakers to my TV?
Typically, no. Only active speakers with an integrated amplifier can be connected directly to a television. For instance, since the majority of soundbars are active, you can use optical or HDMI ARC to connect them directly to a TV.
How can I tell when the battery in my Bluetooth speaker is full?
A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.
When charging, can I use my Bluetooth speaker?
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
How can I identify the positive and negative speaker wires?
You must search for two distinct colors on the cables in order to recognize speaker wires. Speaker wires are commonly constructed with copper wire as the negative and silver wire as the positive.
How long does Pyle Bluetooth speaker take to charge?
The system has a battery life of about 8 hours. 8 to 10 hours on average for charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>