Pyle Portable Wireless Waterproof Shower Speaker User guide

Pyle Portable Wireless Waterproof Shower Speaker – Outdoor Bluetooth

Compatible Rechargeable Battery Powered Loud Sound Speaker

Specifications

• Product Dimensions
  2.25 x 7.5 x 3.75 inches

• Item Weight
  8 ounces

• Batteries
  1 Lithium Ion batteries

• Speaker Maximum Output Power
  120 Watts

• Frequency Response
  1 kHz

• Connectivity Technology
  Bluetooth, Auxiliary, USB

• Power source
   DC 3.7V, 400mA

• Audio output
  1.5W
  SNR: ≥60dB

• Impendence of speakers
   3W, 4 Ohm

• Battery parameter
   3.7V 50mA

• AUX
  3.5MM jack

• Brand
  Pyle

Introduction

Radio waterproof shower Pyle PWPBT10 Bluetooth Enables Wireless Music and Call Answering in the Shower – Big, Simple Controls for Playing Music and Fielding Calls – Compatible with Any Bluetooth Media, MP3 Player or Smart Phone With a broad range of connectivity, this Sound Splash speaker is Bluetooth-enabled and compatible with all of your favorite devices, including iPhone, iPad, iPod, tablet, and Mac. 3.5mm aux in for mp3, laptop, etc. is also included.

1. Hook
2. Bluetooth Indicator
3. Microphone
4. Speaker
5. Power Button
6. Volume up
7. Volume Down
8. Play/Pause
9. handsfree button
10. Aux in
11. USB charge Point

Bluetooth Feature

1. Long press the “POWER” button to power on the device, you will hear a Beep tone and the Bluetooth LED indicator will light blue and blink.

2. Short press the “PLAY/PAUSE” button to start pairing mode, then the Bluetooth indicator light will be alternately flashing blue and red.

3. Turn on the Bluetooth function on your Bluetooth device (mobile phone or tablet).
   Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth to your device.

4. Once paired successfully, the blue LED light will flash slowly.

5. Bluetooth will automatically turn off when the AUX input jack is in use, and it will also automatically pair with the last device after AUX is no longer connected. Click PLAY on your mobile phone or tablet to start playing your music

Microphone Function

1. Press the “handsfree” button you can receive incoming calls under Bluetooth connecting mode.
2. Long press the “microphone” button for 3 seconds will recall the latest call.

AUX IN

Turn on the unit. Connect one end of the 3.5MM stereo cables to the speaker and the other end of the cable to the output jack on your computer sound card or any personal music player like a mobile phone or tablet. Turn on your computer (or mobile phone or tablet). Open the media player and click on PLAY to start playing your music.

Accessories

• 1 x User manual
• 1 x Audio cable connection cable with 3.5mm jacks
• 1 x USB CABLE

Frequently Asked Questions

How do you turn the thing off when charging it always wants to pair even when I don’t wanted to?

Hold the M button until it turns off

Does it have an FM radio?

Yes, it does.

How do you differentiate between skipping a track and increasing volume since it is the same?

To skip a track, you simply push the next track button. To increase the volume, you simply push and hold that same skip track button to increase the volume.

What is the charging time for a wireless shower speaker?

Bluetooth speakers may be fully charged in around 3 hours. Before using your Bluetooth speaker again, make sure the battery is fully charged if you find that it is losing power or not lasting as long as it once did.

Do waterproof speakers function in the shower?

The Wonderboom 2 from UE is a fantastic waterproof speaker that is perfect for use in the shower (and bath). Read the entire review The Final Verdict. The JBL Charge 5 is loud enough to fill your bathroom with music even though you can’t exactly hang it from the showerhead.

What is the operation of Bluetooth shower speakers?

When the Bluetooth speaker is totally off, press and hold the ON/OFF button for around 6 seconds or until the red and blue LEDs start to alternately flash. This will activate the pairing mode. The speaker is now set up for pairing.

When a Bluetooth speaker is fully charged, how do you know?

A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.

How is a Bluetooth shower speaker that is waterproof recharged?

The speaker has a rechargeable battery integrated into it. To charge, plug the included USB cord into a computer or a DC 5V power converter. The LED indicator light on the speaker will become red as it charges. The red LED on the speaker will stop glowing when it is fully charged (the charging time is approximately 3 hours).

Are speakers that are waterproof actually waterproof?

In general, waterproof Bluetooth speakers are not intended to be immersed in water as this could harm the device permanently. To give you an idea of what a speaker can and cannot be subjected to, the majority of Bluetooth waterproof speakers are given an IPX grade.

How long does the battery in a speaker last?

A portable speaker’s battery life typically lasts between 6 and 12 hours, while some can go up to 24 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>