JALL V18039 Digital Alarm Clock User Manual

JALL V18039 Digital Alarm Clock

V18039 Alarm Clock Instructions

We value each and every one of our customers and promise to provide a lifetime warranty service. Simply visit the following link to activate the lifetime warranty service. www.jall-us.com Missing accessories, incorrect color, or any other problems, please contact us: [email protected]

PRODUCT OVERVIEW

Front

1. AM/PM Indicator – The AM/PM Indicator is for a 12-hour system only.
2. Alarm Indicator – If you switch on one of the alarms, it will be on.
3. Humidity – This shows the current indoor humidity level, which is detected by a sensor and cannot be manually changed.
4. Temperature –This shows the current indoor temperature in Celsius or Fahrenheit, which is detected by a sensor and cannot be manually changed.

Back

1. Time Set – Hold the “TIME” button, then use the scroll wheel to set “Year”, “Date”, and “Time”.

2. Volume – Press the “Vol” button once to adjust the volume of the alarm. There are 5 levels to choose from: V1-V5.

3. ℃ / ℉ Switch – Press the “°C / °F” button once to switch between Celsius and Fahrenheit on the display.

4. Alarm 3/2/1 Set – Press the “Alarm” button once will turn the alarm ON or OFF.

   • Hold the “Alarm” button to enter the alarm setting mode.
     Notice: The alarm will be turned ON by default after setting the alarm.

5. 12/24H Switch – A convenient switch to toggle between 12-hour and 24-hour display modes.

6. CR 2032 – The CR2032 battery is used to retain your alarm settings, allowing the clock to restore the current time without re-setting after power is restored.
   Note: If the alarm fails to restore its settings after a power outage, it is possible that the CR 2032 battery is drained and needs to be replaced.

7. Scroll Wheel – Turn it to adjust brightness in normal status, or select a value in the settings menu.

8. Reset – If you find the clock works abnormally, you can use a small stick to push the “RESET” button to initialize.

9. Alarm 3/2/1 Mode Switch – “MON-SUN” = Every day; “MON-FRI” = Weekday mode, only activates the alarm on Monday through Friday. “SAT-SUN” = Weekend mode, only activates the alarm on Saturday and Sunday.

10. Power Input – Please use the original power cord and adapter. If missing, please contact us.

Note: Using a non-original power cord and adapter may cause a malfunction of the alarm clock. An excessive current may damage the circuit board and result in the wireless charging function not working properly.( If your adapter is 5V 1A or 5V 2A, it can be used as a replacement)

Package Includes

• 1 x Digital Alarm Clock
• 1 x User Manual
• 1 x USB Type C Cable
• 1 x 5V 1A Power Adapter

Operating Instructions

• Please connect the type-c end of the power cord to the power input of the alarm clock
• Connect USB-A end to power adapter.

Setting

Time Setting:

1. HOLD for 3 secs to enter Time Setting Menu
2. Turn scroll wheel ” ” to select correct “Year” value Press “TIME” to confirm and next
3. Select correct “Month” value and “Date” value. Press “TIME” to confirm and next (e.g. July, 1)
4. Turn scroll wheel ” ” to select correct “TIME” value Press “TIME” to confirm and next

Normal Time Or Military Time (12/24H):

1. Select “24-Hour” or “12-Hour”
2. 24-hour mode is now displayed

Alarm Setting:

1. Press the “Alarm1” button once to turn the Alarm1 ON or OFF
2. Alarm 1 is on when the indicator light is lit.
3. Press and hold the ‘Alarm 1’ button. to access the settings for Alarm 1, (The same applies for setting up Alarm2 and Alarm3)
4. Flashing light for Alarm 1 indicates success in entering its settings mode.
5. Turn scroll wheel ” ” to change “Alarm Time” of A1. Press “Alarm 1” to confirm and next.
6. Select Alarm 1 mode:
   • MON-SUN(1-7) – Rings every day
   • MON-FRI(1-5) – Rings on weekday only
   • SAT-SUN(6-7) – Rings on weekend only.

Brightness Setting:

1. Turn scroll wheel to adjust brightness.
2. 6 Brightness levels
   • L6… 100%
   • L5… 75%
   • L4…… 50%
   • L3… 25%
   • L2….. 10%
   • L1…… 2%

Temperature Setting

• Press “°C /°F” Button to change temperature unit from °C to °F Tips: You can also press “°C / °F button to exit setting menu.

Alarm Volume Setting:

• Press the “VOL” button and rotate the scroll wheel to adjust volume of the alarm.
• 5 levels to choose from: V1-V5

Snooze:

• When the alarm goes off, press any button once. The corresponding alarm indicator light will flash, giving you an extra 9 minutes of snooze time.
  Notice: The snooze function will automatically shut off after 4 consecutive uses.

• To turn off the snooze feature, simply press any button on the back twice. This will stop the flashing of the alarm indicator light. Alarm will go off on the next day.

Reset:

• Use a needle or little stick to push the “RESET” hole to reset all settings.
• CR2032 is only used for memorizing setting, it will still keep the time even if the clock isn’t plugged in.

Product Features

• Input Voltage: AC110v-240V, 50/60HZ.
• Output Voltage: DC5V / 500MA-2100MA.

Trouble Shooting

1. Missing power cord, or instructions, please contact us on Amazon or by email for a new replacement.
2. Please understand the temperature sensor is pre-set inside the clock. As electronic components may produce heat when working. So it’s normal that the temperature is not as accurate as other professional thermometer. It’s normal there are 1-2 degrees difference. The temperature cannot reset manually because it’s detected by sensor automatically. If the difference is higher than 5 degrees, please contact us for a new replacement.
3. If some numbers are getting dimmer or flash constantly, please take a picture or a short video and contact us for a new replacement.
4. Please use the original power cord and adapter to work. If it’s broken, please contact us for a new power cord & adapter.
5. If you find the clock fails to remember settings. That’s because the CR2032 memory battery has run out of its power. You have to take out the battery shelf on the back of the clock to change CR2032 battery.
6. If you happen to find that the screen is not lit, please try unplugging and reconnecting the power cord, and pressing the RESET button on the back of the alarm clock. If the issue persists, please contact us for a new replacement.

FREQUENTLY ASKED QUESTIONS

What brand manufactures the JALL V18039 Digital Alarm Clock?

The JALL V18039 Digital Alarm Clock is manufactured by JALL.

What type of display does the JALL V18039 Digital Alarm Clock feature?

The JALL V18039 Digital Alarm Clock features a digital display.

What special feature does the JALL V18039 Digital Alarm Clock have?

The special feature of the JALL V18039 Digital Alarm Clock is that it is corded.

What are the product dimensions of the JALL V18039 Digital Alarm Clock?

The JALL V18039 Digital Alarm Clock measures 5.91 inches in width and 3.15 inches in height.

How is the JALL V18039 Digital Alarm Clock powered?

The JALL V18039 Digital Alarm Clock is powered by corded electric and requires 1 CR2032 battery for backup.

What room types is the JALL V18039 Digital Alarm Clock suitable for?

The JALL V18039 Digital Alarm Clock is suitable for bedrooms and kids' rooms.

What is the weight of the JALL V18039 Digital Alarm Clock?

The JALL V18039 Digital Alarm Clock weighs 0.66 grams.

What type of watch movement does the JALL V18039 Digital Alarm Clock use?

The JALL V18039 Digital Alarm Clock uses automatic watch movement.

In what mode does the JALL V18039 Digital Alarm Clock operate?

The JALL V18039 Digital Alarm Clock operates in electrical mode.

What is the item model number of the JALL V18039 Digital Alarm Clock?

The item model number of the JALL V18039 Digital Alarm Clock is V18039.

Can you tell me the price of the JALL V18039 Digital Alarm Clock?

The price of the JALL V18039 Digital Alarm Clock is $21.99.

What should I do if the JALL V18039 Digital Alarm Clock is not displaying the time correctly?

Ensure that the clock is plugged into a functioning power outlet and that the power cord is securely connected. Check the battery compartment for any signs of corrosion or loose connections.

How can I troubleshoot if the alarm on my JALL V18039 Digital Alarm Clock is not going off?

Check the alarm settings to confirm that they are correctly configured with the desired wake-up time. Ensure that the alarm volume is set to an audible level and that the sound is not muted.

What steps should I take if the display on the JALL V18039 Digital Alarm Clock is dim or not lighting up?

Adjust the brightness settings of the clock's display to ensure it is not set to the lowest level. Check the power source and ensure it is providing adequate power to the clock.

How can I troubleshoot if the buttons on the JALL V18039 Digital Alarm Clock are unresponsive?

Check for any dirt, debris, or damage around the buttons that may be obstructing their functionality. Clean the surface of the clock and buttons with a soft, dry cloth.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:JALL V18039 Digital Alarm Clock User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>