JALL K8 Sunrise Alarm Clock User Manual

ThreeDucksDirect@outlook.com

OVERVIEW

*the Fabric version has some different on the back of product.

1. Time Display Area
2. Alarm 1 indicator
3. Alarm 2 indicator
4. Light Mode icon
5. Music icon| 6. FM Radio icon
7. Volume icon
8. Snooze icon
9. Fall Asleep icon
10. Time Set icon|  11. Monday-Sunday
12. AM / PM icon
13. Time: Hour
14. Time: Minute
---|---|---

1. Snooze Button
2. Alarm 1 Button
3. Alarm 2 Button
4. Time Display Dimmer / Time Set
5. Volume Up | 6. FM Radio Button
7. Music Button
8. Volume Down
9. Fall Asleep Button
10. Intensity Up
---|---

*The Fabric version has some differences on the back of the product.

*The Fabric version has some differences on the back of the product.

FIRST USE

Please connect one end of the AC adapter to the DC input port of the wake-up light alarm clock, and plug the other end of the AC adapter into the AC 100-240V home socket. Place the alarm clock at a distance of 16-20 inches from your head, such as on a bedside  table.
This alarm clock comes with a CR2032 battery pre-installed in the battery compartment. Please remove the insulation label on the back of the clock to enable the alarm clock to function properly. Although of the clock to enable the alarm clock to function  properly. Although the alarm clock is equipped with a CR2032 battery, AC power supply must be required. The CR2032 battery is only used for backing up customer settings in case of power failure.
This sunrise alarm clock should be placed in a cool and dry place.
Please wipe off the dust with a soft and damp cloth. Do not use liquid or abrasive cleaning agents.

TIME SET

Note: in the process of setting the time, you only use the Time Set and Snooze button.

1. 12H/24H Time Format Setting
   Press and hold the Time Set button for 2 seconds to start the time setting. Now, the “12H” (24H) on the display area is flashing. Please rotate the Snooze button to select the “12H” or “24H” time format.
   Then click the Time Set button to confirm. And then the “Hour” icon is flashing.

2. Time: “ Hour “Setting
   Please rotate the Snooze button to select the “Hour”.
   Then click the Time Set button to confirm. And then the “Minute” icon is flashing.

3. Time: “M inute”Setting
   Please rotate the Snooze button to select the “Minute”.
   Then click the Time Set button to confirm. And then the “Mon-Sun” icon is flashing.

4. “Monday- Sunday” Setting
   Please rotate the Snooze button to select which day of the week it is today. Then click the Time Set button to confirm.

So far, you have set a time for your alarm clock.
if the insulation label is not removed and the device is disconnected from the power source, the time will be reset to 12:00 AM after the clock is reconnected to the power source.

ALARM SET

Note: in the process of setting the alarm, you only use the Alarm and Snooze button. Below is an example of setting the alarm 1. The same applies to alarm 2.

1. Activate The Alarm 1
   Click the Alarm 1 button to activate alarm 1 first. Now, the time display area will flash for 2 seconds to remind the user that the alarm 1 is activated.

2. Alarm Time: “Hour”Setting
   Press and hold the Alarm 1 button for 2 seconds to start the alarm 1 setting. Now, the “Hour” icon on the display area is flashing. Please rotate the Snooze button to set the alarm time: “Hour”. Then click the Alarm 1 button to confirm. And then the “Minute” icon is flashing.![JALL K8 Sunrise Alarm Clock

• Alarm set 2](https://manuals.plus/wp-content/uploads/2023/11/JALL-K8 -Sunrise-Alarm-Clock-Alarm-set-2.jpg)

  3. Alarm Time: “M inute”Setting
     Please rotate the Snooze button to set the alarm time: “Minute”. Then click the Alarm 1 button to confirm.
     And then the Alarm Sounds code(S01) is flashing.

  4. Alarm Sounds Setting
     Please rotate the Snooze button to set the alarm sounds S01-S08(or OFF). Then click the Alarm 1 button to confirm. And then the sounds volume is flashing.

  5. Sounds Volume Setting
     Please rotate the Snooze button to set the sounds volume (V01-V16). Then click the Alarm 1 button to confirm.
     And then the light brightness is flashing.

  6. Light Intensity Setting
     Please rotate the Snooze button to set the wake-up light intensity L01-L20(or OFF). Then click the Alarm 1 button to confirm. And then the Dawn Duration Time is flashing.

  7. Dawn Duration Time Setting
     Please rotate the Snooze button to set the Dawn Duration Time ( 0-60 Minutes). Then click the Alarm 1 button to confirm. So far, you have set an alarm for your clock.
     Note: You can’t set the sounds and light to be “OFF” at the same time.

• The Cawn duration is the time it takes for the light of the alarm clack to gradually brighten up in advance. During this period. the wake-up light will gradually brighten, véhen the alarm time comes, the light reaches the maximum brightness you set, and the alarm will sound at the same time. 8. Alarm M ode Setting
  By turning the Alarm Mode Switch on the back of the alarm clock, you can set the corresponding alarm for Every Day, Weekday or Weekend.

SNOOZE

When the alarm goes off, you can click the Snooze button to snooze.

1. Snooze Function
   After clicking the Snooze button, you will sleep for an extra 9 minutes. 9 minutes later, the light and sound will reappear. There‘re infinite times of snooze for this alarm clock.

SNOOZE SET

In this mode, you can have the following settings:

1. Set the snooze duration. (Default 9 minutes)

2. When the alarm rings, you can choose whether the light stays on after pressing the snooze button. (Default off)

3. Set the Snooze Duration
   Press and hold the Snooze button for 3 seconds to enter snooze mode. Please rotate the Snooze button to set the snooze duration (5-20 mins). Click the Snooze button to confirm.

4. Set The Light On / Off During Snooze
   Please rotate the Snooze button to choose whether the light stays on after pressing the snooze button. Click the Snooze button to confirm and quit.

STOP ALARMS

When the alarm goes off, you have 3 options to stop the alarm for the day.

1. Press and Hold the Snooze Button for 3 Seconds
2. Click Corresponding Alarm Button Once
3. Without Any Action

If there is no operation within 20 minutes, the alarm will automatically turn off for the day.

【Important】How To Disable The Alarm Completely?
When you set the alarm 1, the alarm 1 indicator will appear on the display panel, which means that the alarm 1 is currently active and it will ring the next time. If you want to disable alarm 1 completely, you need to click the Alarm 1 button, and the alarm 1 indicator will disappear, which means you have completely turned off the alarm 1 and it will not ring the next time.
Similarly, if you want to reactivate it, please click the Alarm 1 button again.

FM RADIO SET

In order to get excellent FM radio performance, we recommend that the antenna should be fully extended. When the radio is in operation, adjust the antenna position to get the best reception.

Manual Frequency Tuning:

1. Turn The FM Radio On
   Click the FM Radio button to turn FM Radio on. Now, the time display area will show the frequency of current station to remind the user that the FM Radio is activated.

2. Manual Frequency Tuning
   Please rotate the Snooze button to manually search for all available stations within the frequency range of 76.0 MHz to 108.0 MHZ.

3. Volume Up / Down
   Click the Volume Up (or Volume Down) button to increase or decrease the volume.

4. Turn Off The FM Radio
   Click the FM Radio button again to quit.

Automatic Frequency Tuning:

1. Turn The FM Radio On
   Click the FM Radio button to turn FM Radio on. Now, the time display area will show the frequency of current station to remind the user that the FM Radio is activated.

2. Automatic Frequency Tuning
   Press and hold the FM Radio button for 2 seconds and the device will scan for all available stations from 76.0 MHz to 108.0 MHZ. After the scan is complete, the device will play the first available station.

3. Switch Stations
   Press and hold the Volume Up (or Volume Down) button for 2 seconds and the device will play the next available station.

4. Turn Off The FM Radio
   Click the FM Radio button again to quit.

MOOD LIGHT

This light alarm clock has a total of 15 kinds of colorful mood lights, including 8 kinds of solid color lights and 7 kinds of RGB mood lights.

8 Solid Color Light Modes:

1. Turn The Sunlight On
   Click the Wake-Up Light button to open the sunlight and use it as a night light.

2. Turn Solid Color Light On
   Press and hold the Wake-Up Light button for 2 seconds to turn on the solid color light. Click the Wake-Up Light button to change the colors of light. There’re 8 different color lights in total.
   (Red-Orange-Pink-Green-Blue-Indigo-Purple-Grey)

3. Intensity Up / Down
   Click Intensity Up (or Intensity Down) button to increase or decrease the intensity of the light. There’re 20 levels of brightness.

4. Turn Off The Solid Color Light M ode
   Press and hold the Wake-Up Light button for 2 seconds to quit.

7 RGB Mood Light Modes:

1. Turn The RGB Mood Light On
   Click the RGB Mood Light Button to turn on the RGB mood light. Click the RGB Mood Light button to change to other RGB Mood Lights. There’re 7 different RGB mood lights in total (C01 – C07).

2. Intensity Up / Down
   Click the Intensity Up (or Intensity Down) button to increase or decrease the intensity of the light. There’re 20 levels of brightness.

3. Turn Off The RGB Mood Light Mode
   Press and hold the RGB Mood Light button for 2 seconds to quit.

MUSIC

This alarm clock has a total of 8 natural sounds. (cricket, campfire in the forest, birds, frogs, seagulls, river, rain, wind chimes)

1. Turn The Music On
   Click the Music button to turn on the music mode.
   Click the Music button to change music’s. There’re 8 natural sounds in total (S01 – S08).

2. Volume Up / Down
   Click Volume Up (or Volume Down) button to increase or decrease the volume. There’re 16 levels of volume.

3. Turn Off The Music M ode
   Press and hold the music button for 2 seconds to quit.

FALL ASLEEP MODE

In fall asleep mode, the light and music will gradually diminish over time until they shut off at the end of the fall asleep duration.
During fall asleep duration, you can turn off the light or music separately.
The longest fall asleep duration can be set to 480 minutes (8 hours), which can almost last for an entire night.

1. Turn The Fall Asleep M ode On
   Click the Fall Asleep button to turn on the fall asleep mode, the light and the sound will be on. Now, the fall asleep duration is flashing. Please rotate the snooze button to adjust the duration (max 480 minutes).

2. Fall Asleep Light & Sounds
   You can adjust the light (15 lights), music(8 sounds & FM radio) or turn it off. Methods for switching the lights and music’s or turning it off, please refer to the relevant sections in the manual regarding lights and musics.
   (Page 16-18)

3. Turn Off The Fall Asleep M ode
   Click the Fall Asleep button to view the remaining sleep time. Press and hold the Fall Asleep button for 2 seconds to quit.

SOME TIPS

1. Turn it on as a night light / reading light
   In order to make it easier for customers to turn the light on in the dark night, we specially designed the function of clicking the Snooze button to turn on the night light.
   It will be a bedside lamp/night light/reading lamp/mood light depending on your needs. Click the intensity Up/ Down button to adjust the brightness of the light.
   Note: Click the Snooze button again to quit.
   Note: Click the Snooze button again to quit.

2. Adjust the brightness of the time display
   In order to better adapt to day and night, we have set 4 brightness for the time display, from low to high, namely L0/L1/L2/L3, that is, L0 is completely off, and L3 is the highest brightness.(Default L2) Click the Dimmer button to switch between different brightness levels of time display.
   Worth mentioning is that if you set the time display to L0 level before going to sleep at night, when the alarm goes level before going to sleep at night, when the alarm goes off in the morning, the time display will automatically revert to L2 brightness.

3. About the battery compartment
   A CR2032 battery is built in the battery compartment on the back of the alarm clock, which can usually last for many years. There is a way to replace the CR2032 battery, but it can be a little difficult for non-professionals without special tools. In view of  this, we do not recommend users to replace it by themselves. If necessary, please contact us via Email.*The Fabric version has same differences on the back of the product, with its battery compartment built ‘nto the aiarm clock.

4. About the USB output
   We designed a 5V1A USB output port, which can charge mobile phones, tablets and other devices. But please do not connect high-power devices.

FAQ

This section summarizes the most common issues you may have with the wake-up light. If you’re unable to resolve the issue referring to the info below, please feel free to contact ThreeDucksDirect@ outlook.com for further assistance.

Q: This appliance doesn't work at all.

(1) Perhaps the adapter is not inserted properly in the wall outlet. Plug the adapter properly into the wall outlet. (2) Perhaps there is a power failure. Check if the power supply works by connecting another appliance. If not, please contact us via Email for further help.

Q: How can I turn the alarm sound off once it has gone off?

Q: Can I make it so that only the light comes on, not the alarm? (or Can you set the alarm so there is only sound, no light?)

(1) When setting an alarm, the sound volume can be set to OFF, which means that when the alarm goes off, there will be light but no sound. (2) When setting an alarm, the light intensity can be set to OFF, which means that when the alarm goes off, there will be sound but no light. Note : You can't set both light and sound to be“OFF”at the same time.

Q: How can I completely turn off the time display?

You can adjust the brightness of the time display, or turn it off by clicking the Dimmer button. Please refer to the page 20.

Q: Can I completely turn off the alarm so it won't ring any more?

You can turn the alarm off completely by clicking the Alarm button. Please refer to the page 13.

Q: W hy didn't my alarm go off?

(1) Please ensure that the alarm indicator is on. (Page 13) (2) Please ensure that the Alarm Mode Switch is in the correct position. (Page 11) (3) Please ensure that the alarm is set correctly. (AM/PM error, Page 6) If not, please contact us via Email for further help.

Q: I received a product that was damaged/missing part/scratched /dirty.

I apologize for that. Please don’t worry, we are committed to providing a lifetime warranty on this product. Please contact us via Email for a brand new replacement.

ThreeDucksDirect@outlook.com

Documents / Resources

| JALL K8 Sunrise Alarm Clock [pdf] User Manual
K8 Sunrise Alarm Clock, K8, Sunrise Alarm Clock, Alarm Clock, Clock
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>