JALL WX18039 Wooden Digital Alarm Clock User Manual

JALL WX18039 Wooden Digital Alarm Clock

WX18039 Alarm Clock Instructions

We value every customer and commit to providing a lifetime warranty service to each and every one of them. Missing accessories, incorrect color, unable to wirelessly charge your phone or any other problems, please contact us: ThreeDucksDirect@outlook.com

PRODUCT OVERVIEW

Front

1. AM/PM Indicator – AM/PM Indicator is for 12-hour system only.

2. Alarm Indicator – If you switch on 1 of the alarms, it will be on.

3. Wireless Charging Area – Please place your phone in the center area.
   Notice: Avoid attaching metal items to your phone as it may interfere with wireless charging or cause the phone to overheat.

4. Humidity – This shows the current indoor humidity level, which is detected by a sensor and cannot be manually changed.

5. Temperature – This shows the current indoor temperature in Celsius or Fahrenheit, which is detected by a sensor and cannot be manually changed.

Back

1. Time Set – Hold the “TIME” button, then use the scroll wheel to set “Year”, “Date”, and “Time”.

2. Volume – Press the “Vol” button once to adjust the volume of the alarm. There are 5 levels to choose from: V1-V5.

3. ℃ / ℉ Switch – Press the “°C / °F” button once to switch between Celsius and Fahrenheit on the display.

4. Alarm 3 / 2 / 1 Set – Press the “Alarm” button once will turn the alarm ON or OFF.

   • Hold the “Alarm” button to enter the alarm setting mode.
     Notice: The alarm will be turned ON by default after setting the alarm.

5. 12/24H Switch – A convenient switch to toggle between 12-hour and 24-hour display modes.

6. CR 2032 – The CR2032 battery is used to retain your alarm settings, allowing the clock to restore the current time without re-setting after power is restored.
   Note : If the alarm fails to restore its settings after a power outage, it is possible that the CR 2032 battery is drained and needs to be replaced.

7. Scroll Wheel – Turn it to adjust brightness in normal status, or select a value in the settings menu.

8. Reset – If you find the clock works abnormally, you can use a small stick to push the “RESET” button to initialize.

9. Alarm 3/2/1 Mode Switch – “MON-SUN” = Every day; “MON-FRI” = Weekday mode, only activates the alarm on Monday through Friday. “SAT-SUN” = Weekend mode, only activates the alarm on Saturday and Sunday.

10. Power Input – Please use the original power cord and adapter. If missing, please contact us.

Note: Using a non-original power cord and adapter may cause a malfunction of the alarm clock. An excessive current may damage the circuit board and result in the wireless charging function not working properly.( If your adapter is 5V 2A, it can be used as a replacement)

Package Includes

• 1 x Digital Alarm Clock
• 1 x User Manual
• 1 x USB Type C Cable
• 1 x 5V 2A Power Adapter

Operating Instructions

1. Please connect the type-c end of the power cord to the power input of the alarm clock
2. Connect USB-A end to power adapter.

Setting:

Wireless charging:

1. Plug in the 5V2A power adapter with the clock. Adapter comes with the package. You can also use your 5V2A phone adapter instead. However, please understand DO NOT use 5V1A adapter because its power is not enough for wireless charging. (Needs 5V2A)
2. Place your wireless phone on the correct charging area. Make sure your phone case is NOT thicker than 5mm.
   • Compatible models:
   • iPhone X, iphone 12/13/14 and newer generations.
   • Samsung Note 10/11/12. S8, S8+, $20/21/22 and other newer generations.
   • any other phones that support wireless charging may be compatible with.
3. Incorrect position e.g.1
4. Incorrect position e.g.2
5. Incorrect position e.g. 3
   Warning : Take off the magnetic steel piece charging. If there’s steel- made item between wireless devices, it will produce high heat.

Time Setting:

1. HOLD for 3 secs to enter Time Setting Menu
2. Turn scroll wheel ” ” to select correct “Year” value Press “TIME” to confirm and next
3. Select correct “Month” value and “Date” value. Press “TIME” to confirm and next (e.g. July, 1)
4. Turn scroll wheel ” ” to select correct “TIME” value Press “TIME” to confirm and next

Normal Time Or Military Time (12/24H):

1. Select “24-Hour” or “12-Hour”
2. 24-hour mode is now displayed

Alarm Setting:

1. Press the “Alarm1” button once to turn the Alarm1 ON or OFF
2. Alarm 1 is on when the indicator light is lit.
3. Hold the ‘Alarm 1’ button. to access the settings for Alarm1, (The same applies for setting up Alarm2 and Alarm3)
4. Flashing light for Alarm 1 indicates success in entering its settings mode.
5. Turn scroll wheel ” ” to change “Alarm Time” of A1. Press “Alarm 1” to confirm and next.
6. Select Alarm 1 mode:
   • MON-SUN(1-7) – Rings every day
   • MON-FRI(1-5) – Rings on working days only
   • SAT-SUN(6-7) – Rings on weekend only.

Brightness Setting:

1. Turn scroll wheel to adjust brightness.
2. 6 Brightness levels
   • L6………….100%
   • L5…………….75%
   • L4…………50%
   • L3………….25%
   • L2…………..10%
   • L1…………2%

Temperature Setting:

• Press “°C / °F” Button to change temperature unit from °C to °F Tips: You can also press “°C / °F button to exit setting menu.

Alarm Volume Setting:

1. Press the “VOL” button and rotate the scroll wheel to adjust volume of the alarm.
2. 5 levels to choose from: V1-V5

Snooze:

1. When the alarm goes off, press any button once. The corresponding alarm indicator light will flash, giving you an extra 9 minutes of snooze time.
   Notice: The snooze function will automatically shut off after 4 consecutive uses.

2. To turn off the snooze feature, simply press any button on the back twice. This will stop the flashing of the alarm indicator light. Alarm will go off on the next dav.

Reset:

1. Use a needle or little stick to push the “RESET” hole to reset all settings.
2. CR2032 is only used for memorizing setting, it will still keep the time even if the clock isn’t plugged in.

Product Features

• Input Voltage: AC110v-240V, 50/60HZ.
• Output Voltage: DC5V / 500MA-2100MA.

Trouble Shooting

1. Missing power cord, or instructions, please contact us on Amazon or by email for a new replacement.

2. Please understand the temperature sensor is pre-set inside the clock. As electronic components may produce heat when working. So it’s normal that the temperature is not as accurate as other professional thermometer. It’s normal there are 1-2 degrees difference. The temperature cannot reset manually because it’s detected by sensor automatically. If the difference is higher than 5 degrees, please contact us for a new replacement.
   Notice: When using wireless charging for a phone, it may heat up and temporarily cause the temperature sensor in the alarm clock to malfunction. The sensor will return to normal after half an hour of stopping wireless charging.

3. If some numbers are getting dimmer or flash constantly, please take a picture or a short video and contact us for a new replacement.

4. Please use the original power cord and adapter to work. If it’s broken, please contact us for a new power cord & adapter.

5. If you find the clock fails to remember settings. That’s because the CR2032 memory battery has run out of its power. You have to take out the battery shelf on the back of the clock to change CR2032 battery.

6. Default display content includes Time, Temperature, Humidity. It cannot hide temperature or humidity. It’s unable to display time only.

FREQUENTLY ASKED QUESTIONS

What brand manufactures the JALL WX18039 Wooden Digital Alarm Clock?

The JALL WX18039 Wooden Digital Alarm Clock is manufactured by JALL.

What type of display does the JALL WX18039 Wooden Digital Alarm Clock feature?

The JALL WX18039 Wooden Digital Alarm Clock features a digital display.

What special features does the JALL WX18039 Wooden Digital Alarm Clock have?

The JALL WX18039 Wooden Digital Alarm Clock includes a snooze function and an alarm.

What are the product dimensions of the JALL WX18039 Wooden Digital Alarm Clock?

The JALL WX18039 Wooden Digital Alarm Clock measures 5.7 inches in width and 2.5 inches in height.

How is the JALL WX18039 Wooden Digital Alarm Clock powered?

The JALL WX18039 Wooden Digital Alarm Clock is powered by corded electric.

What room types is the JALL WX18039 Wooden Digital Alarm Clock suitable for?

The JALL WX18039 Wooden Digital Alarm Clock is suitable for bedrooms and kids' rooms.

What is the weight of the JALL WX18039 Wooden Digital Alarm Clock?

The JALL WX18039 Wooden Digital Alarm Clock weighs 10.2 ounces.

What type of watch movement does the JALL WX18039 Wooden Digital Alarm Clock use?

The JALL WX18039 Wooden Digital Alarm Clock uses automatic watch movement.

Can you tell me the price of the JALL WX18039 Wooden Digital Alarm Clock?

The price of the JALL WX18039 Wooden Digital Alarm Clock is $29.99.

What should I do if the JALL WX18039 Wooden Digital Alarm Clock is not displaying the correct time?

Ensure that the clock is plugged into a functioning power outlet and that the power cord is securely connected. Check the battery backup if applicable, and replace the batteries if necessary.

How can I troubleshoot if the alarm on my JALL WX18039 Wooden Digital Alarm Clock is not sounding?

Check the alarm settings to confirm that they are correctly configured with the desired wake-up time. Ensure that the alarm volume is set to an audible level and that the sound is not muted. If using battery backup, ensure the batteries are not depleted.

What steps should I take if the display on the JALL WX18039 Wooden Digital Alarm Clock is dim or not lighting up?

Adjust the brightness settings of the clock's display to ensure it is not set to the lowest level. Check the power source and ensure it is providing adequate power to the clock. If using battery backup, ensure the batteries are properly inserted and charged.

How can I troubleshoot if the buttons on the JALL WX18039 Wooden Digital Alarm Clock are unresponsive?

Check for any dirt, debris, or damage around the buttons that may be obstructing their functionality. Clean the surface of the clock and buttons with a soft, dry cloth.

What should I do if the alarm sound on my JALL WX18039 Wooden Digital Alarm Clock is distorted?

Adjust the alarm volume to a suitable level and ensure there are no obstructions around the clock that may be affecting the sound quality. Test the alarm with different volume settings.

How can I troubleshoot if the JALL WX18039 Wooden Digital Alarm Clock is losing time or displaying inaccurate time?

Ensure that the clock is set to the correct time zone and adjust it if necessary. Test the clock with a different power source to rule out issues with the outlet or power cord. If using a battery backup, replace the batteries.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: JALL WX18039 Wooden Digital Alarm Clock User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>