MKETECH MKE 411 Wireless Mouse Instruction Manual

June 5, 2024
MKETECH

MKETECH MKE 411 Wireless Mouse Instruction Manual

Product key position display diagram

Product Introduction

  1. Left Mouse Button
  2. Right Mouse Button
  3. Scroll Wheel Button
  4. DPI Button
  5. Logo

Special Product Features

  1. DPI Adjustment:
    Single-click the DPI Button/④ to switch to the next DPI setting. The mouse’s light will indicate DPI levels, which are 800-1200 (default)-1600.

  2. Sleep Mode:
    The mouse will enter sleep mode after one minute of inactivity, and it will also trigger during charging. Press any button to wake up the mouse, and it will return to sleep mode after inactivity.

  3. Low Voltage Mode:
    Low battery voltage indication: When the battery is low, the RGB light at the DPI position will flash red as a warning, and the mouse will remain  in low battery warning status as long as it is in use.

G Receiver Re-pairing:

  1. Make sure the mouse is powered on at startup. Disconnect the receiver.
  2. Simultaneously press and hold the Right Mouse Button/② and the Scroll Wheel Button/③ for three seconds, and the DPI Button’s green light will flash to enter re-pairing mode.
  3. Reinsert the receiver, and the mouse will automatically pair with the inserted receiver.

Connection Methods

2.4G Connection : Insert the mouse receiver into the computer’s USB port, wait for the mouse to connect, and the mouse’s light will illuminate. If the mouse doesn’t respond when inserted, please repeat the above steps.

Product Specifications

Main Control MCU: TL8516
Optical IC : PXI PAW3065XY
DPI Values: 1200
Left/Right Button Lifespan: 300,000 clicks
Middle Button Lifespan : 200,000 clicks
DPI Button Lifespan: 200,000 clicks
Encoder Lifespan: 30,000 rotations
Power Consumption: 1.5V /15±3.0mA
Product Dimensions: 104.7563.1539.05mm
Product Weight: 56.4g
Number of Buttons : 4 buttons
Compatible Systems: Windows, Mac, Chromebook

One-Year Warranty

Thank you for your purchase, and we take pride in the quality of our products. MKETech Electronics product warranty does not cover any device or product that is not manufactured by MKETech Electronics (including, but not limited to laptops, smartphones, devices, or any other product that may be used in conjunction with the MKETech Electronics product). MKETech Electronics warrants to the original purchaser that its products are free from defects in materials and workmanship during the specified warranty period and will remain in like-new condition for as long as the original purchaser owns the product.The warranty period is indicated on the MKETech Electronics product’s packaging or in the provided documentation.
MKETech Electronics Limited Product Warranty excludes damage FCC STATEMENT : caused by accidents, misuse, improper use, neglect, unauthorized modifications, ownership transfer, or unauthorized repairs.

Warranty Terms

  1. This warranty is applicable to the original purchaser and is non-transferable.
  2. A proof of purchase (receipt or invoice) must be provided to make a warranty claim.
  3. This warranty covers manufacturing defects and failures occurring under normal and expected use of the mouse. It does not cover damage resulting from accidents, misuse, improper use, neglect, unauthorized modifications, or unauthorized repairs.

Contact Information

For warranty claims and inquiries, please contact:

Company Name: MKETech Inc.
Address:
2000 South Grove Ave, Suite 109, Ontario, CA, USA 91761
Phone: (909)-850-4601
Email: info@MKETechelectronics.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including  interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals