PROVIEW Aluminum Wide Scaffolds Instruction Manual
- August 6, 2024
- PROVIEW
Table of Contents
PROVIEW Aluminum Wide Scaffolds
Assembly Instruction
Step 1
Insert the adjustable wheels into the legs of the frame. Lock the wheels with the lock pins, and brakes.
Step 2
Position the ladder frame as shown. Lock the wheels, and clip the horizontal braces onto the rungs.
Step 3
Clip on diagonal braces onto the lowest rung in opposing directions. Ensure to lock them entirely. Frame is now self supporting.
Step4
Locate the platform on 2nd rung (approx 1 .Om) level.
Step 5
Install the next set of diagonal braces.
Add next lift of 5 rung ladder frames.
Step 6
Install the platform on 5th rung (approx 2.0m).
Step 7
Add the adjustable stabilisers, then lock them entirely. Do not climb the platform until fully guard railed.
Step 8
Continue steps 5 and 6 until required working height is reached. Erect
guardrails and horizontal braces. Guardrails should extend l .0m past the
platform in all cases.
Do not climb to next platform until it is fully guard railed.
Step 9
Fit toeboards to all working platforms.
Install ladders to all platforms.
A typical 6.0m high Wide Scaffold
Other Sizes and Combinations Available
Ladders omitted for clarity.
CUSTOMER SUPPORT
1300166134
www.buyaluminumscaffold.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>