MKETECH MKE 408 Wireless Mouse Instruction Manual
- June 1, 2024
- MKETECH
Table of Contents
MKETECH MKE 408 Wireless Mouse
Product Specifications
- Model : MKE 408
- Connection : 2.4G
- Buttons : Left Mouse Button, Right Mouse Button, Scroll Wheel Button, DPI Button, Forward Button, Backward Button, LOGO
- Features : Sensor Receiver Storage, Anti-slip Foot Pads
Product Introduction
The MKE 408 mouse features various buttons including left and right mouse
buttons, a scroll wheel button, DPI button, forward button, backward button,
and a logo. It also includes anti-slip foot pads for stability.
Special Product Features
The mouse offers a comfortable grip with its anti-slip foot pads and allows
for smooth navigation with its various buttons.
Connection Methods
To connect the mouse via 2.4G, insert the mouse receiver into the computer’s
USB port. Wait for the mouse light to illuminate, indicating it is ready to
use. If there is no response, repeat the steps.
Product Usage Instructions
- Step 1: Insert the mouse receiver into the computer’s USB port.
- Step 2: Wait for the mouse light to illuminate.
- Step 3: Use the various buttons on the mouse for navigation and control.
- Step 4: To change the DPI settings, press the DPI button accordingly.
- Step 5: For forward or backward navigation, use the designated buttons.
Product key position display diagram
Product Introduction
- Left Mouse Button
- Right Mouse Button
- Scroll Wheel Button
- DPI Button
- Forward Button
- Backward Button
- LOGO
Special Product Features
-
1. DPI Adjustment:
Click the DPI button/④ to perform DPI switching, allowing you to adjust to the next DPI level. The mouse light will indicate the DPI settings, which are 800-1200-1600 respectively. -
Sleep Mode:
The mouse enters sleep mode after one minute of inactivity, even during charging. Pressing any button will wake up the mouse, and it will still enter sleep mode after a period of inactivity. -
Low Voltage Mode:
Battery low voltage indication: when the battery is low, the red light on the DPI position RGB lamp will blink as a warning, and the mouse will remain in low battery warning status as long as it is in operation. -
2.4G Receiver Re-pairing:
-
Confirm that the mouse is powered on, then unplug the receiver.
-
Simultaneously press and hold the left and right mouse buttons/①& ② and the scroll wheel button/③ for three seconds until the green light flashes to enter re-pairing mode.
-
Reinsert the base, and the mouse will automatically pair with the inserted base.
Connection Methods
2.4G Connection: Insert the mouse receiver into the computer’s USB port, wait for the mouse to connect, and the mouse light will illuminate, indicating it is ready to use. If there is no response when inserting the mouse, please repeat the above steps.
Product Specifications
- Main Control MCU : TL8516
- Optical IC : PXI PAW3065XY DPI
- Values : 800-1200-1600c
- Left and Right Switch Lifespan: 300,000 times (silent switch)
- Middle Button Switch Lifespan: 300,000 times (silent switch)
- DPI Button Switch Lifespan: 300,000 times (silent switch)
- Side Button Switch Lifespan: 300,000 times
- Encoder Lifespan: 30,000 times
- Power Consumption: 1.5V 15 ± 3mA
- Product Dimensions: 11674.143.6mm
- Product Net Weight: 72g
- Operating Distance: >9 meters
- Number of Buttons: 6 buttons
- Compatible Systems: Windows, Mac, Chromebook
One-Year Warranty
Thank you for your purchase, and we take pride in the quality of our products. MKETech Electronics product warranty does not cover any device or product that is not manufactured by MKETech Electronics (including, but not limited to laptops, smartphones, devices, or any other product that may be used in conjunction with the MKETech Electronics product). MKETech Electronics warrants to the original purchaser that its products are free from defects in materials and workmanship during the specified warranty period and will remain in like-new condition for as long as the original purchaser owns the product. The warranty period is indicated on the MKETech Electronics product’s packaging or in the provided documentation. MKETech Electronics Limited Product Warranty excludes damage caused by accidents, misuse, improper use, neglect, unauthorized modifications, ownership transfer, or unauthorized repairs.
Warranty Terms
- This warranty is applicable to the original purchaser and is non-transferable.
- A proof of purchase (receipt or invoice) must be provided to make a warranty claim.
- This warranty covers manufacturing defects and failures occurring under normal and expected use of the mouse. It does not cover damage resulting from accidents, misuse, improper use, neglect, unauthorized modifications, or unauthorized repairs.
Contact Information
For warranty claims and inquiries, please contact:
- Company Name : MKETech Inc.
- Address : 2000 South Grove Ave, Suite 109, Ontario, CA, USA 91761
- Phone : (909)-850-4601
- Email : info@MKETechelectronics.com
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment can be used in portable exposure
condition without restriction.
FAQ
1. What is the warranty period for the MKE 408 mouse?
The warranty period is indicated on the product’s packaging or documentation
and typically covers manufacturing defects under normal use.
2. How do I make a warranty claim?
To make a warranty claim, provide proof of purchase (receipt or invoice) and
contact MKETech Inc. through the provided contact information.
3. What are the FCC compliance statements for this device?
The device complies with Part 15 of the FCC Rules and meets radiation exposure
limits for an uncontrolled environment as per FCC guidelines.
4. What should I do if the mouse does not respond after connection?
If the mouse does not respond after connecting the receiver, repeat the
connection steps or contact customer support for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>