MKETech MKE 602 Wireless Mouse User Manual

MKETech MKE 602 Wireless Mouse

Product key position display diagram

Product Introduction

1. Left mouse button
2. Right mouse button
3. Scroll wheel button
4. DPI button
5. Forward button
6. Backward button
7. & 8. Convenient buttons
8. Mode switch button
9. Logo
10. Type-C charging port

Special Product Features

1. Click and Double-Click the left mouse button/①/⑦ or the right mouse button/②/⑧ to activate the left and right button functions.
2. DPI Adjustment: Click the DPI button/④to switch DPI levels, adjusting to the next DPI setting. The mouse light will indicate the DPI levels, which are 800-1200 (default)-1600-2400.
3. Browser Forward/Backward: Used for browsing web pages, the forward button/⑤ is for navigating forward, and the backward button/⑥ is for navigating backward.
4. Connection Mode Switch: Press the mode switch button/⑨ to switch between 2.4G/Wireless 1/Wireless 2 modes.
5. Sleep Mode: The mouse will enter sleep mode after one minute of inactivity, and it will also trigger during charging. Pressing any button will wake up the mouse, and it will return to sleep mode after a period of inactivity.
6. Low Voltage Mode: Battery low voltage indicator: When the battery is low, the red light on the DPI position RGB indicator will blink as a warning. The low battery warning will persist as long as the mouse is in use.
7. 2.4G receiver re-pairing:
8. Ensure the mouse is powered on, unplug the receiver.
9. Simultaneously press and hold the right mouse button/② and the scroll wheel button/③ for three seconds, and the green light on the DPI button will blink to enter re-pairing mode.
10. Reinsert the receiver, and the mouse will automatically pair with the inserted receiver.

Connection Methods

Wired Connection: Insert the Type-C end of the mouse connection cable into the mouse and the other end into the computer’s USB port.

Wait for the mouse to connect, and the mouse light will turn on to indicate readiness. If there is no response when the mouse is plugged in, please repeat the above steps.

Wireless Connection:

1. Switch the mouse mode switch to BT1/BT2, and after entering wireless mode, press the “CONNECT” button on the bottom to pair.
2. Access “Settings” from your computer’s system.
3. Click “Add Device” in ‘Devices’ and search for the ‘TREASURE WIRELESS’ device to establish a connection.

Note: Initial connection may take a few seconds.

Product Specifications

• Main Control MCU: TL8251
• Optical IC: PXI PAW3212XY
• DPI Values: 800-1200-1600
• Lifespan of Left and Right Buttons: 300,000 clicks (silent switches)
• Lifespan of Middle Button: 300,000 clicks (silent switch)
• Lifespan of DPI Switch: 300,000 clicks
• Lifespan of Side Buttons: 300,000 clicks
• Encoder Lifespan: 300,000 rotations
• Cable: 1.5 meters 5PIN black braided cable
• Power Consumption: 3.7V/Max: 6mA
• Product Dimensions: 122.2283.751.06mm
• Product Weight: 133.5g
• Number of Buttons: 9 buttons
• Compatible Systems: Windows, Mac, Chromebook”

One-Year Warranty

Thank you for your purchase, and we take pride in the quality of our products. MKETech Electronics product warranty does not cover any device or product that is not manufactured by MKETech Electronics (including, but not limited to laptops, smartphones, devices, or any other product that may be used in conjunction with the MKETech Electronics product). MKETech Electronics warrants to the original purchaser that its products are free from defects in materials and workmanship during the specified warranty period and will remain in like-new condition for as long as the original purchaser owns the product.The warranty period is indicated on the MKETech Electronics product’s packaging or in the provided documentation. MKETech Electronics Limited Product Warranty excludes damage caused by accidents, misuse, improper use, neglect, unauthorized modifications, ownership transfer, or unauthorized repairs

Warranty Terms

1. This warranty is applicable to the original purchaser and is non-transferable.
2. A proof of purchase (receipt or invoice) must be provided to make a warranty claim.
3. This warranty covers manufacturing defects and failures occurring under normal and expected use of the mouse. It does not cover damage resulting from accidents, misuse, improper use, neglect, unauthorized modifications, or unauthorized repairs.

Contact Information

For warranty claims and inquiries, please contact:

Company Name: MKETech Inc.
Address: 2000 South Grove Ave, Suite 109, Ontario, CA, USA 91761
Phone: (909)-850-4601
Email: info@MKETechelectronics.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>