OPTICON OPN-2500 Barcode Generator User Guide
- June 1, 2024
- OPTICON
Table of Contents
OPTICON OPN-2500 Barcode Generator
Bluetooth Mode
Unpair Device
iOS Keyboard Toggle (with Clear/Function key)
Quick start instructions
- Step 1 – Scan Bluetooth mode Scan the Bluetooth Mode barcode that matches the connection method you wish to use, HID (recommended), SPP or BLE. If you enable the iOS Keyboard Toggle feature by scanning the ENABLE barcode, you will also be able to toggle the on-screen keyboard of an iOS device by tapping the Clear/Function key.
- Step 2 – Hold the clear/function key for 3 sec Hold the OPN-2500’s Clear/Function key for 3 seconds until it beeps and begins to flash blue. The OPN-2500 is now discoverable by your host device. This can be cancelled at any time by holding the Clear/Function key for another 3 seconds.
- Step 3 – Perform Bluetooth search on host Use the Bluetooth interface on your host device to search for and select the OPN-2500. The OPN-2500 will beep and the blue LED will stop flashing, indicating pairing was successful. If you are pairing in Bluetooth-SPP or BLE mode, the OPN-2500 will complete the pairing process assoon as you launch an appropriate application and open the serial port created by your Bluetooth software.
For information about your OPN-2500, including detailed setup instructions,
downloads and more, visit us at:
www.opticonusa.com/start/opn or
www.opticon.com/downloads
opticonfigure.opticon.com
OSG OPN-2500_05.2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>