BOSCH BRC3100 Mini Remote Dropbar Instruction Manual

BOSCH BRC3100 Mini Remote Dropbar

Specifications:

• Product: Mini Remote | Mini Remote Dropbar
• Model Numbers: BRC3300 | BRC3310
• Operating Temperature: +10°C to +40°C
• Storage Temperature: +10°C to +40°C
• Protection Class: IP55
• Dimensions: 16mm x 20mm
• Weight: 16g (Mini Remote) | 20g (Mini Remote Dropbar)

Product Information

The Mini Remote and Mini Remote Dropbar are control units for Bosch eBike Systems. They are powered by a CR1620 button cell.

Usage Instructions:

Changing Button Cell:
To change the button cell in the Mini Remote/Mini Remote Dropbar, gently tighten the mounting screw (7) with 0.6 Nm.

Turning the eBike On/Off:
To turn the eBike on or off, follow the instructions in your eBike’s manual.

Battery Level Indicator:
The battery level indicator shows different levels of charge.cWhen charging, the top bar blinks.

Assist Levels:
The assist levels range from OFF to RACE, providing varying levels of assistance during cycling.

Using Bicycle Lighting (Mini Remote/Mini Remote Dropbar):
You can toggle the bicycle lighting on or off using the Mini Remote or Mini Remote Dropbar.

Activating Walk Assistance:
If you do not reactivate walk assistance within 10 seconds, it will turn off automatically.

Connecting to Smartphone:
To connect your smartphone, use the eBike Flow app and log in with your account details.

FAQ:

Can I replace eBike components myself?
You can replace eBike components like the smartphone by following these steps:

1. Install the eBike Flow app on the new smartphone.
2. Login with the same account used for activation.

Safety Instructions

Read all the safety and general instructions.

• Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury
• Save all safety warnings and instructions for future reference.
• The term eBike battery is used in these instructions to mean all original Bosch eBike rechargeable battery packs from the system generation the smart system.
• The terms drive and drive unit used in these operating instructions refer to the original Bosch drive units from the system generation the smart system.
• Read and observe the safety warnings and directions contained in all the eBike system operating instructions and in the operating instructions of your eBike.
• Do not attempt to secure the on-board computer or operating unit while riding!
• The push assistance function must only be used when pushing the eBike. There is a risk of injury if the wheels of the eBike are not in contact with the ground while using the push assistance.
• When the push assistance is activated, the pedals may turn at the same time. When the push assistance function is activated, make sure that there is enough space between your legs and the turning pedals to avoid the risk of injury.
• When using the walk assistance, make sure that you can control the eBike and that you can hold it securely at all times. Under certain circumstances, the walk assistance may stop (e.g. if the pedals hit an obstacle or if you accidentally let go of the button on the operating unit). The eBike may suddenly move backwards onto you or tip up. This presents a risk for the user particularly if there is additional load on the eBike. When using the walk assistance, do not bring the eBike into situations in which you cannot hold the eBike using your own strength.
• Do not stand your eBike upside down on its handlebars and saddle if the operating unit or its holder protrude from the handlebars. This may irreparably damage the operating unit or the holder.
• Do not connect a charger to the eBike battery if the display for the operating unit or on-board computer reports a critical error. This may result in damage to your eBike battery. The eBike battery may catch fire, thereby resulting in serious burns and other injuries.
• The operating unit features a wireless interface. Local operating restrictions, e.g. in aeroplanes or hospitals, must be observed.
• Caution! When using the operating unit with Bluetooth®, this may cause interference that affects other devices and systems, aeroplanes and medical devices (e.g. pacemakers, hearing aids). Likewise, injury to people and animals in the immediate vicinity cannot be excluded entirely.
• Do not use the operating unit with Bluetooth® in the vicinity of medical devices, petrol stations, chemical plants, areas with a potentially explosive atmosphere or on blast sites. Do not use the operating unit with Bluetooth® in aeroplanes. Avoid operation near your body for extended periods.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by Robert Bosch GmbH, Bosch eBike Systems is under license.
• Observe all national regulations which set out the approved use of eBikes.

Safety instructions for coin cells

WARNING! Ensure that the coin cell is kept out of the reach of children. Coin cells are dangerous.
When the product is not attached to the eBike, the product is not suitable for use in areas where children may be present. If the battery compartment does not close securely, do not continue to use the product and keep it away from children.

• Coin cells must never be swallowed or inserted into any other part of the body. If you suspect that someone has swallowed a coin cell or that a coin cell has entered the body in another way, seek medical attention immediately. Swallowing coin cells can result in severe internal burns and death within two hours.
• Ensure that coin cell replacement is carried out properly. There is a risk of explosion.
• Only use the coin cells listed in this operating manual. Do not use any other coin cells or other forms of electrical power supply.
• Do not attempt to recharge the coin cell and do not short circuit the coin cell. The coin cell may leak, explode, catch fire and cause personal injury.
• Remove and dispose of drained coin cells correctly. Drained coin cells may leak and cause personal injury or damage the product.
• Do not overheat the coin cell or throw it into fire. The coin cell may leak, explode, catch fire and cause personal injury.
• Do not damage the coin cell and or take the coin cell apart. The coin cell may leak, explode, catch fire and cause personal injury.
• Do not allow damaged coin cells to come into contact with water. Leaking lithium may mix with water to create hydrogen, which could cause a fire, an explosion, or personal injury.

Battery is hazardous and is to be kept away from children (whether the battery is new or used). Battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body.

Privacy notice
When you connect the eBike to the Bosch DiagnosticTool 3 or replace eBike components, technical information about your eBike (e.g. manufacturer, model, bike ID, configuration data) and the eBike usage (e.g. total riding time, energy consumption, temperature) is transferred to Bosch eBike Systems (Robert Bosch GmbH) to process your inquiry, servicing and product improvement. You can find further information about data processing at www.bosch-ebike.com /privacy-full.

Product Description and Specifications

Intended Use

• The System Controller and Mini Remote/Mini Remote Dropbar operating units are designed for controlling an eBike/on-board computer from the system generation the smart system. You can also use them to change the assistance level in the eBike Flow app.
• So as to be able to use the operating unit fully, a compatible smartphone with the eBike Flow app is required.
• Using the eBike Flow app, a Bluetooth® connection can be established between the smartphone and the eBike, between the smartphone and System Controller, and between System Controller and Mini Remote/Mini Remote Dropbar.
• Depending on the smartphone’s operating system, the eBike Flow app can be downloaded free of charge from the Apple App Store and the Google Play store.

Use your smartphone to scan the code to download the eBike Flow app.

Product Features

All illustrations of bike parts except for the drive unit, onboard computer (including operating unit), speed sensor and the corresponding holders are a schematic representations and may differ on your eBike.
The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual.

1. Operating unit Mini Remote/Mini Remote Dropbar
2. Operating unit System Controller
3. LED indicator light
4. Button for increasing assistance level +/ bicycle lights
5. Select button
6. Button for decreasing assistance level –/ walk assistance
7. Fastening screw for holder
8. Holder
9. Rubber insert/battery holder
10. Assistance level LED
11. ABS LED (optional)/ambient light sensor
12. On/off button
13. Charge indicator of the eBike battery
14. Mode button

Technical Data

Operating unit System Controller

Product code|  | BRC3100
Operating temperature| °C| −5 to +40
Storage temperature| °C| +10 to +40
Protection rating|  | IP55
Dimensions| mm| 88 × 28 × 27
Weight| g| 35

Bluetooth® Low Energy 5.0

Dropbar
---|---|---|---
Product code|  | BRC3300| BRC3310
Operating temperature| °C| –5 to +40| –5 to +40
Storage temperature| °C| +10 to +40| +10 to +40
Battery|  | 1× CR1620| 1× CR1620
Protection rating|  | IP55| IP55
Dimensions| mm| 40 × 39 × 22| 50 × 46 × 22
Operating unit Mini Remote           Mini Remote Dropbar

Weight| g| 16| 20
Bluetooth ® Low Energy 5.0|
– Frequency| MHz| 2400–2480| 2400–2480
– Transmission power| mW| ≤ 1.9| ≤ 1.9

The licence information for the product can be accessed at the following Internet address: www.bosch-ebike.com/licences

Declaration of Conformity

Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the System Controller/Mini Remote/Mini Remote Dropbar radio communication unit complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be accessed at the following Internet address: www.bosch- ebike.com/conformity.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the System Controller/Mini Remote/Mini Remote Dropbar radio communication unit complies with the Radio Equipment Regulations 2017 (SI 2917/1206). The full text of the UK Declaration of Conformity can be accessed at the following Internet address: www.bosch-ebike.com/conformity.

Operation

Requirements
The eBike can then only be switched on when the following requirements are met:

• A sufficiently charged eBike battery is inserted (see operating instructions for the eBike battery from the system generation the smart system).
• The speed sensor is connected properly (see operating instructions for the drive unit from the system generation the smart system).

Operating unit power supply (System Controller)
If a sufficiently charged eBike battery is inserted into the eBike and the eBike is switched on, then the internal operating unit battery is powered and charged.
Please contact your bicycle dealer if the internal battery of the operating unit is defective.

Operating Unit (Mini Remote/Mini Remote Dropbar) Power Supply
The Mini Remote/Mini Remote Dropbar operating unit is supplied with energy by a CR1620 coin cell. Changing the coin cell (Mini Remote/Mini Remote Dropbar)
If the coin cell of the operating unit Mini Remote/Mini Remote Dropbar (1) is running low, the LED indicator light (3) will flash orange.

To change the coin cell, remove the operating unit Mini Remote/ Mini Remote Dropbar from the handlebars. Remove the rubber insert (9). Remove the used coin cell and insert a new one of type CR1620 into the battery holder. Close the battery compartment by the rubber insert (9). Check that the rubber insert (9) is correctly inserted to ensure the battery compartment is fully sealed. The LED indicator light (3) will flash green to indicate that the coin cell has been inserted correctly. Then secure the Mini Remote/Mini Remote Dropbar operating unit onto the handlebars.
Note : Carefully tighten the fastening screw (7) (0.6 Nm).
Note : The connection to the System Controller is not interrupted when the coin cell is changed.
You can obtain the coin cells recommended by Bosch from your bicycle dealer

Switching the eBike On and Off

• To switch on the eBike, briefly press the on/off button (12). After the starting animation, the state of charge of the eBike battery is displayed in colour with the battery charge indicator (13) and the set assistance level with the (10) display.
• The eBike is ready to ride.
• The display brightness is controlled by the ambient light sensor (11). Therefore, do not cover the ambient light sensor (11).
• The drive is activated as soon as you start pedalling (except at assistance level OFF). The drive power varies depending on the assistance level set.
• As soon as you stop pedalling when in normal operation, or as soon as you have reached a speed of 25/45 km/h, the drive switches off the assistance. The drive is automatically reactivated as soon you start pedalling again and the speed is below 25/45 km/h.
• To switch off the eBike, press the on/off button (12) briefly (< 3 s). The battery charge indicator of the eBike battery (13) and the assistance level LED (10) go out.
• If no power is drawn from the drive for about 10 minutes (e.g. because the eBike is not moving) and no button is pressed, the eBike will switch off automatically.

Quick Menu

• Selected settings are displayed on the quick menu. These settings can also be changed while riding.
• You can access the quick menu by pressing and holding (> 1 s) the select button .
• It cannot be accessed from the status screen.

The following settings can be changed via the quick menu: –

All data on the journey so far is reset to zero. – (optional)
The settings vary depending on the gearing in question.
Note : Other functions may be available depending on your eBike equipment.

Battery charge indicator of the eBike battery
In the battery charge indicator of the eBike battery (13), each ice-blue bar represents 20 % capacity and each white bar represents 10 % capacity. The topmost bar shows the maximum capacity.
Example : Four ice-blue bars and one white bar are displayed. The state of charge is between 81 % and 90 %. If capacity is low, both of the lower displays change colour:

If the eBike battery is being charged, the topmost bar on the battery charge indicator of the eBike battery (13) flashes. The eBike battery’s state of charge is also indicated outside the eBike, by the LEDs on the eBike battery.

Selecting the Assistance Level

• On the operating unit, you can set the level of assistance you want the drive to provide you with while pedalling.
• Mini Remote/Mini Remote Dropbar: Briefly press (< 1 s) the buttons to increase assistance + (4) or decrease assistance – (6) in order to increase or decrease the assistance level accordingly.
• System Controller: Briefly press (< 1 s) the mode button (14) to increase assistance.
• Press the mode button (14) for longer than 1 s to decrease the assistance.
• The assistance level can be changed at any time, even while cycling, and is displayed in colour.

pedalling, as with a normal bi- cycle.
ECO| Effective assistance with maximum efficiency, for maximum range
TOUR| Steady assistance, long range for touring
TOUR+| Dynamic assistance for natural, sporty cycling
eMTB| Optimal assistance whatever the terrain, rapid acceleration when starting from a standstill, im- proved dynamics and top performance
SPORT| Powerful assistance, for mountain biking and for cycling in urban traffic
TURBO| Maximum assistance even at a high cadence, for sporty cycling
Level Notes

AUTO| The assistance is dynamically adapted to the riding situation.
RACE| Maximum support on the eMTB racetrack; very direct response and maximum “Extended Boost” for the best possible performance in competitive situations
CARGO| Steady, powerful support for safely transport- ing heavy weights
SPRINT| Dynamic support according to cadence – for athletic eGravel and eRoad cycling with rapid sprints and frequent ascents

Note : The available modes depend on the respective drive unit.
The designations and configuration of the assistance levels can be preconfigured by the manufacturer and selected by the bicycle retailer.

Adapting the Assistance Level

• The assistance level can be adapted within certain limits using the eBike Flow app. This gives you the option of adjusting your eBike to your personal requirements.
• It is not possible to create a completely new mode. You can only adjust the modes that have been enabled by the manufacturer or dealer on your system. This may be fewer than four modes.
• In addition, restrictions in your country may mean that it is not possible to adjust a particular mode.

The following parameters are available for making adjustments:

• Assistance in relation to the base value of the mode (within the legal requirements)
• Drive response
• Top limit speed (within the legal requirements)
• Maximum torque (within the limits of the drive)

Note : Please ensure that your modified mode retains the position, name and colour on all on-board computers and controls.

Interaction between the Drive Unit and Gearshifting

• The gear shifting should be used with an eBike in the same way as with a normal bicycle (observe the operating instructions of your eBike on this point).
• Irrespective of the type of gear shifting, it is advisable that you briefly reduce the pressure on the pedals when changing gear. This will aid gear shifting and reduce wear on the powertrain.
• By selecting the correct gear, you can increase your speed and range while applying the same amount of force.
• Switching Bicycle Lights On and Off (Mini Remote/Mini Remote Dropbar only)
• Check that your bike lights are working correctly before every use.
• To switch on/off the bike lights, press and hold the bicycle lights (4) button for more than 1 s.

Switching the Walk Assistance On and Off

• The walk assistance makes it easier to push your eBike. The maximum speed of the walk assistance is 4 km/h. The manufacturer can adjust the default so that it is lower and, if necessary, it can also be adjusted by the bicycle retailer.

• The push assistance function must only be used when pushing the eBike. There is a risk of injury if the wheels of the eBike are not in contact with the ground while using the push assistance.

• If the selected gear is too high, the eBike’s drive unit cannot move and the roll-away lock cannot engage.
  To start walk assistance, press the walk assistance (6) button for more than 1 s and keep it pressed. The battery charge indicator of the eBike battery (13) goes out and a white moving light in the direction of travel shows that it is ready.
  To activate walk assistance, one of the following actions must occur within the next 10 s:

  • Push the eBike forwards.
  • Push the eBike backward.
  • Perform a sideways tilting movement with the eBike.

• After activation, the drive begins to push and the continuously filling white bars change colour to ice-blue.
  If you release the walk assistance (6) button, walk assistance is stopped. You can reactivate walk assistance within 10 s by pressing the walk assistance (6) button.
  If you do not reactivate walk assistance within 10 s, walk assistance automatically switches off.
  Walk assistance is always ended if:

  • The rear wheel jams,
  • The bicycle cannot move over ridges,
  • A body part is blocking the bike crank,
  • An obstacle continues to turn the crank,
  • You start pedaling,
  • The increased assistance level +/bicycle lights (4) button or on/off button (12) is pressed.

• Walk assistance has a roll-away lock, i.e. even after walk assistance has been used, rolling backwards is actively curbed by the drive for a few seconds, and you cannot push the eBike backwards or can only do so with difficulty.
  The roll-away lock is immediately deactivated by pressing the increase assistance level +/bicycle lights (4) button.
  The push assistance function is subject to local regulations; the way it works may therefore differ from the description above, or the function may even be deactivated completely.

ABS – anti-lock braking system (optional)
If the eBike is equipped with a Bosch eBike ABS from the system generation the smart system, the ABS LED (11) lights up when the eBike system starts. After moving off, the ABS internally checks its functionality and the ABS LED (11) goes off. In the event of a fault, the ABS LED (11) lights up, together with the assistance level LED (10) flashing orange. You can acknowledge the fault using the select button (5) on the Mini Remote/Mini Remote Dropbar (1) operating unit or with the mode button (14) on the System Controller (2) operating unit. The flashing assistance level LED (10) goes out. While the ABS LED (11) is lit up, the ABS is not in operation.
For details on the ABS and how it works, please refer to the ABS operating instructions.

Establishing a smartphone connection

• In order to be able to use the following eBike functions, a smartphone with the eBike Flow app is required.
• Connection to the app occurs via a Bluetooth® connection.
• Switch the eBike on and do not ride.
• Begin Bluetooth® pairing by pressing and holding (> 3 s) the on/off button (12). Release the on/off button (12) as soon as the topmost bar on the battery charge indicator of the eBike battery (13) shows the pairing process by flashing blue.
• Confirm the connection request in the app.

Activity tracking

In order to record activities, it is necessary to register and log into the eBike Flow app.
To record activities, you must consent to the storage of your location data in the app. Without this, your activities cannot be recorded in the app. For location data to be recorded, you must be logged in as the user.

eBike Lock

• The can be activated for each user via the eBike Flow app. In the process, a key for unlocking the eBike is saved on the smartphone.
• The is automatically enabled in the following cases:
  • The eBike is switched off via the operating unit
  • The eBike is switched off automatically
• If the eBike is switched on and the smartphone is connected to the eBike via Bluetooth®, the eBike will be unlocked. is linked to your user account.
• If you lose your smartphone, you can log in to your user account on the eBike Flow app using another smartphone and unlock then the eBike.
• Warning! If you select a setting in the app that could have negative consequences in combination with the (e.g. deleting your eBike or user account), you will be shown warning messages beforehand. Please read through these thoroughly and adhere to the warnings that are issued (e.g. before deleting your eBike or user account).

Setting Up the
In order to be able to set up the , the following conditions must be fulfilled:

• The eBike Flow app is installed.
• A user account has been created.
• The eBike is not currently updating.
  • The eBike is connected to the smartphone via Bluetooth®.
  • The eBike is stationary.
  • The smartphone is connected to the Internet.
  • The eBike battery is sufficiently charged and the charging cable is not connected.
• You can set up the in the eBike Flow app in the menu item.
• From now on, you can deactivate the assistance from your drive unit by switching on in the eBike Flow app. This deactivation can only be overridden if your smartphone is in the vicinity of the eBike when the eBike is switched on. To do this, your smartphone must have Bluetooth® switched on and the eBike Flow app must be active in the background. The eBike Flow app does not need to be open. When the is activated, you can continue to use your eBike without assistance from the drive unit.

Compatibility
The is compatible with these Bosch eBike product lines from the system generation of the smart system:

Active Line Plus

BDU31xx| Performance Line SX

How it Works

• In combination with the , the smartphone functions similarly to a key for the drive unit. The is activated by switching off the eBike. As long as the is active after the function is switched on, this will be indicated by the System Controller operating unit flashing white and by a padlock symbol on the on-board computer.
  Note : The alone does not provide adequate theft protection; it is simply a supplement to a mechanical lock! The does not provide any form of mechanical lock for the eBike. Only the assistance from the drive unit is deactivated.

• The drive unit will be unlocked for as long as the smartphone is connected to the eBike via Bluetooth®.

• If you wish to give other users temporary or permanent access to your eBike or you want to take your eBike to a service, you will need to deactivate the in the eBike Flow app in the menu item. If you wish to sell your eBike, you will also need to delete the eBike from your user account in the eBike Flow app in the menu item.

• When the eBike is switched off, the drive unit will emit a “Lock” sound (i.e. an audio signal that is played once) to indicate that the assistance from the drive unit is switched off.
  Note : The audio signal will only be played if the eBike is switched on.
  When the eBike is switched on, the drive unit will emit two “Unlock” sounds (i.e. an audio signal that is played twice) to indicate that the assistance from the drive unit is enabled again.

• The “Lock” sound will help you determine whether or not the on your eBike is active. The audio signal is activated by default, but it can be deactivated in the eBike
  Flow app in the menu item by selecting the lock symbol under your eBike.
  Note : If you can no longer set up or switch off the , please contact your bicycle dealer.

Replacing eBike Components and the
Replacing the Smartphone

• Install the eBike Flow app on the new smartphone.
• Log in with the same account that was used to activate the .
• The is displayed as set up in the eBike Flow app.

Replacing the Drive Unit

• The is displayed as deactivated in the eBike Flow app.
• Activate the by pushing the controller to the right.
• If you are handing in your eBike to a bicycle dealer for maintenance, it is recommended that you temporarily deactivate .

Software updates

• Software updates must be manually started in the eBike Flow app.
• Software updates are transferred to the operating unit in the background of the app as soon as it is connected to the app.
• During the update process, a green flashing on the battery charge indicator of the eBike battery (13) shows the progress.
• The eBike is then restarted.
• You can control the software updates via the eBike Flow app.
• Connecting the System Controller to the Mini Remote/Mini Remote Dropbar
• The System Controller and Mini Remote/Mini Remote Dropbar operating units are connected via Bluetooth®.

Switch the eBike on and do not ride
If the Mini Remote/Mini Remote Dropbar operating unit has not already been connected to the System Controller operating unit by the bicycle dealer, proceed as follows:

1. First connect your smartphone to the System Controller operating unit via the eBike Flow app (see Establishing a smartphone connection).

2. In the eBike Flow app, select . You will be asked to switch the System Controller and Mini Remote/Mini Remote Dropbar to pairing mode.

3. System Controller: Start the pairing process by pressing and holding (3 s) the on/off button (12) until the lower bar on the battery charge indicator (13) shows the pairing process by flashing blue.

4. Mini Remote/Mini Remote Dropbar: Start the pairing process by pressing any button until the pairing process is shown by the LED indicator light (3) flashing blue

5. Follow the instructions in the eBike Flow app. If pairing is successful, this is shown within 30 s on the Mini Remote/Mini Remote Dropbar operating unit by the LED indicator light (3) flashing green three times.
   If the connection cannot be established, this is shown by the LED indicator light (3) flashing red three times. Repeat the connection process.
   If you want to connect the Mini Remote/Mini Remote Dropbar operating unit to a System Controller on another eBike, the following steps must be carried out:

6. Mini Remote/Mini Remote Dropbar: Remove the battery on the Mini Remote/Mini Remote Dropbar operating unit and reinsert it.

7. Within the next 10 s, press and hold the decrease assistance –/walk assistance (6) button for 5 s.
   The pairing process is shown by the LED indicator light (3) flashing blue for 30 s.

8. System Controller: Start the pairing process by pressing and holding (3 s) the on/off button (12) until the lower bar on battery charge indicator (13) shows the pairing process by flashing blue.
   If pairing is successful, this is shown within 30 s on the Mini Remote/Mini Remote Dropbar operating unit by the LED indicator light (3) flashing green three times.
   If the connection cannot be established, this is shown by the LED indicator light (3) flashing red three times. Repeat the connection process.

Error messages

• The operating unit shows whether critical errors or less critical errors occur on the eBike.
• The error messages generated by the eBike can be read via the eBike Flow app or by your bicycle retailer.
• Via a link in the eBike Flow app, information about the error and support for rectifying the error can be displayed.

Less critical errors

• Less critical errors are shown by the assistance level LED (10) flashing orange. To acknowledge the fault, press the select button (5) on the Mini Remote/Mini Remote Dropbar (1) operating unit or the mode button (14) on the System Controller (2) operating unit. The assistance level LED (10) once again continuously shows the colour of the set assistance level.
• You can use the following table to rectify the errors yourself if necessary. Otherwise, please contact your bicycle retailer
  Number| Troubleshooting
  ---|---
  523005 __| The indicated error numbers show that
  514001| there is interference when the sensors de-

tect the magnetic field. See whether you have lost the magnet while riding.

514002 __
514003| If you are using a magnet sensor, check that

514006| the sensor and magnet have been properly
 | installed. Make sure too that the cable to the
 | sensor is not damaged.

If you are using a rim magnet, make sure that you do not have any magnetic field interfer- ence in the vicinity of the drive unit.

Critical errors
Critical errors are shown by the assistance level LED (10) and the battery charge indicator of the eBike battery (13) flashing red. Follow the instructions in the table below if a critical error occurs

Please contact your specialist dealer.

6A0004| Remove the PowerMore battery and restart your eBike.

If the problem persists, please contact your

specialist dealer.

890000| –   Acknowledge the error code.

–   Restart the eBike system. If the problem persists:

–   Acknowledge the error code.

–   Perform software update.

–   Restart the eBike system. If the problem persists:

–   Please contact a Bosch eBike Systems

specialist dealer.

Maintenance and servicing

Maintenance and Cleaning

• The operating unit must not be cleaned with pressurised water.
• Keep the operating unit clean. Dirt can cause faulty brightness detection.
• Clean your operating unit using a soft cloth dampened only with water. Do not use cleaning products of any kind.
• Have all repairs performed only by an authorized bike dealer.
• After-sales service and advice on using products
• If you have any questions about the bike and its components, contact an authorized bicycle dealer.
• For contact details of authorized bike dealerships, please visit www.bosch-ebike.com.

Disposal and substances in products

• You can find information about substances in products at the following link: www.bosch-ebike.com/en/material-compliance.
• Do not dispose of eBikes and their components with household waste.
• The drive unit, onboard computer incl. operating unit, eBike battery, speed sensor, accessories, and packaging should be disposed of in an environmentally correct manner.
• Check that your data has been deleted from the device.
• Batteries that can be removed from the power tool without destruction must be removed before disposal itself and sorted for separate battery collection.
• By Directive 2012/19/EU and Directive 2006/66/EC respectively, electronic devices that are no longer usable and defective/ drained batteries must be collected separately and recycled in an environmentally friendly manner.
• Electrical and electronic equipment are collected separately for pre-sorting by type and help to ensure that raw materials are treated and recovered properly, thereby protecting people and the environment.
• Please return Bosch eBike components that are no longer usable free of charge to an authorised bicycle dealer or a recycling facility.

Subject to change without notice

Documents / Resources

| BOSCH BRC3100 Mini Remote Dropbar [pdf] Instruction Manual
BRC3100 Mini Remote Dropbar, BRC3100, Mini Remote Dropbar, Remote Dropbar, Dropbar
---|---

References

• Bosch eBike Systems | Premium eBike systems & smart features - Bosch eBike Systems
• Declaration of conformity - Bosch eBike Systems
• Material Compliance - Bosch eBike Systems
• Licences Products - Bosch eBike Systems
• General. Data protection - Bosch eBike Systems - Bosch eBike Systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>