GREE FLEXX Series Electric Heater Kit Instruction Manual
- June 4, 2024
- Gree
Table of Contents
FLEXX Series Electric Heater Kit
INSTALLATION MANUAL
Electric Heater Kit
MODELS:
FLEXX24HP240V1AH FLEXX36HP240V1AH FLEXX48HP240V1AH FLEXX60HP240V1AH
Thank you for choosing our product. Please read this Installation & Owner’s
Manual carefully before operation and retain it for future reference.
If you lose this Manual, please contact your local distributor visit
www.greecomcomfort.com/resources now to download an file the electronic
version.
CAT NO: GREE_FLEXX_ELECTRIC_HEATER_KIT_INSTALLATION_MANUAL_092721
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this Installation
Manual. Observe all safety warnings. During installation or repair, caution is
to be observed It is your responsibility to install the product safely and to
educate the customer on its safe use
CAUTIONS
ENSURE THAT ALL POWER IS DISCONNECTED PRIOR TO ATTEMPTING INSTALLATION OF THIS
HEATER KIT. THERE MAY BE MORE THAN ONE DISCONNECT SERVICING THE UNIT. A MEANS
OF STRAIN RELIEF AND CONDUCTOR PROTECTION MUST BE PROVIDED AT THE SUPPLY WIRE
ENTRANCE INTO CABINET. USE COPPER CONDUCTORS ONLY INSTALLATION MUST FOLLOW
NATIONAL ELECTRIC CODE AND OTHER APPLICABLE CODES
IF THIS APPLIANCE IS INSTALLED IN AN ENCLOSED AREA SUCH AS A GARAGE OR UTILITY
ROOM WITH ANY CARBON MONOXIDE PRODUCING APPLIANCE, ENSURE THE AREA IS PROPERLY
VENTILATED
1
1. Remove the front panel and upper access panel from the air handler. 2.
Disassemble the electrical box
2
3. Remove the electrical box 4. Disassemble the metal plate at the mounting
hole of the electric heater
3
5. Install the electric heater to the metal plate position which disassembles
in step 4. (Notes: There are two holes circled below which are used to fasten
the electric heater bracket during installation)
4
6. Install breaker (Notes: When installation, you need to lift up the buckle
first, hold the breaker bracket and then put down the buckle to fix the
breaker)
7. Connect the electric heater terminal
5
8. After installation, the schematic diagram is as follows:
9. Install the electrical box back to the original position
10. Install the front panel and upper panel back to the air handler. Electric
heater installation is completed.
6
Electric Heater Kits
Model
Cooling capacity(ton) Optional electric heater
FLEXX24,36HP230V1AH
2.0 / 3.0
FLEXXHTR5KW
5
FLEXX24,36HP230V1AH
2.0 / 3.0
FLEXXHTR8KW
8
FLEXX36,48,60HP230V1AH
3.0 / 4.0 / 5.0
FLEXXHTR10KW
10
FLEXX48,60HP230V1AH FLEXX48,60HP230V1AH
4.0 / 5.0 4.0 / 5.0
FLEXXHTR15KW
15
FLEXXHTR20KW
20
7
U.S. CONTACT INFORMATION TRADEWINDS, LLC
E-mail: info@twclimate.com Contractor Support:
888-850-7928 | Mon-Fri 8 AM – 5 PM EDT
GREECOMFORT.COM
CAT NO: GREE_FLEXX_ELECTRIC_HEATER_KIT_INSTALLATION_MANUAL_092721