LUMEGEN LEDDOCK1000051001 LED Square Dock Light Instruction Manual
- June 4, 2024
- LUMEGEN
Table of Contents
[ LED SQUARE DOCK LIGHT ] INSTRUCTION MANUAL
LEDDOCK1000051001 – LG-LDSH-20-50K
LEDDOCK1000051002 – LG-LDSH-30-50K
LEDDOCK1000051003 – LG-LDSH-50-50K
LEDDOCK1000051001 LED Square Dock Light
Project:
Date of Purchase:
IMPORTANT: Read all instructions prior to installation! Keep instructions for future reference!
Included Parts List:
- (1) LED Round Dock Light Head
- (1) Instruction Sheet
Optional Accessories
- A40in. Adjustable Bracket Arm Kit – Single Arm
- 24in. Adjustable Bracket Arm Kit – Single Arm
- A40in. Adjustable Bracket Arm Kit – Double Arm
- A0in. Adjustable Bracket Arm Kit – Double Arm -Built- In Power Receptacle+1ft Dock Light Extension Cable
- 60in. Adjustable Bracket Arm Kit – Double Arm
- 8ft Dock Light Extension Cable
IMPORTANT SAFETY & NOTES WARNING
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
- Product should be installed by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
- Failure to properly support the fixture may result in damage or injury, for which the manufacturer does not assume responsibility.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.
WARNING
- Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply!
- Turn off the power when you perform any maintenance.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
- All wiring connections should be capped with UL approved wire connectors.
CAUTION
- Avoid direct eye exposure to the light source while it is on
- Account for small parts and destroy packing material, as these may pose hazardous to children.
- Risk of burn! Disconnect power and allow fixture to cool before handling.
Recommended Tool List (Not included):
- Phillips Screw driver
- Hammer
- Electrical Meter
Electrical Specification
Power| Input Voltage| Frequency| Luminous Efficacy| Color
Temperature| Opera Temperature| IP Rating
---|---|---|---|---|---|---
20W| 100-277VAC| 50/60Hz| 140lm/W| 5000K| -40°F ~ +113°F| IP65
30W| 100-277VAC| 50/60Hz| 140lm/W| 5000K| -40°F ~ +113°F| IP65
50W| 100-277VAC| 50/60Hz| 140lm/W| 5000K| -40°F ~ +113°F| IP65
*IP65 rating requires connection to weather protected outlet.
INSTALLATION INSTRUCTIONS
WARNING: Turn off power supply from main circuit breaker first!
Installaerent Swing Brackets (“Wall Mounting”)
-
40in. Adjustable Bracket Arm Kit – Single Arm LEDDOCK1000051007 (need to be purchased separately)
Step 1. Drill holes in the wall according to the size of the wall mounte;
Step 2. Fix the bracket with screws on the wall;
Step 3. Securely aach light to arm. Connect power cord to light. -
24in. Adjustable Bracket Arm Kit – Single Arm LEODOCK1000051008 (need to be purchased separately)
Step 1. Drill holes in the wall according to the size of the wall mounting plate;
Step 2. Fix the bracket with screws on the wall;
Step 3. Securely attach light to arm. Connect power cord to light. -
40in. Adjustable Bracket Arm Kit – Double Arm LEDDOCK1000051009 (need to be purchased separately)
Step 1. Drill holes in the wall according to the size of the wall mounting plate;
Step 2. Fix the bracket with screws on the wall;
Step 3. Securely attach light to arm. Connect power cord to light. -
40in. Adjustable Bracket Arm Kit – Double Arm – Built-in Power Receptacle LEDDOCK1000051010 (need to be purchased separately)
Step 1. Drill holes in the wall according to the size of the wall mounting plate;
Step 2. Fix the bracket with screws on the wall;
Step 3. Connect 1ft extension cable with a 120v US plug to light head.
Step 4. Securely attach light to arm. Connect power cord to light. -
60in. Adjustable Bracket Arm Kit – Double Arm LEODOCK1000051011 (need to be purchased separately)
Step 1. Drill holes in the solid objects according to the size of the mounting bracket;
Step 2. Connect 8ft extension cable with a 120v US plug. -
8ft Dock Light Extension Cable LEDDOCK1000051012 (need to be purchased separately)
Step 1. Drill holes in the solid objects according to the size of the mounting bracket;
Step 2. Connect 8ft extension cable with a 120v US plug.
TROUBLESHOOTING
Having trouble? Before contacting the manufacturer, please review below troubleshooting check list:
- Verify your power source is on.
- Check electrical connections for secure connections.
5-Year Limited Warranty
LumeGen (Seller) carries a limited warranty on all of it’s LED products for
manufacturing defects and product failures. The warranty period for commercial
products is 5 years from the date of purchase (based on 12 hours per day, 7
days per week of normal commercial use). If LumeGen LED products fail to
operate within the warranty period listed above when used as directed, contact
LumeGen Customer Service Department to initiate the return process and explain
your warranty claim. Failure to follow the procedure as provided by the
Customer Service Department will void this warranty.
What you Do: We ask that you call our Customer Service Department at
800-998-6977 to obtain an RMA number
and explain the warranty issue. It is the customer’s responsibility to pay for
the return shipping of the defective product (s) back to the Seller. If the
product(s) is found to be defective, the Seller will pay for the shipping
costs of the replacement product (s) back to the customer. The returned
product (s) must include the RMA # clearly marked on the outside of the
packaging, and must include a copy of the original proof of purchase (invoice
or sales order).
What we Do: Once we receive the product (s) in question, we will verify
the defective claim on the product. If we determine that the defect was not
caused by negligence, improper installation, electrical surges, alteration,
abuse, unauthorized repair, or disassembly, we will send you a replacement
LumeGen Product (s). If an identical replacement is not available for any
reason, LumeGen reserves the right, at its sole discretion, to replace the
defective product (s) with a different product (s) of equal value that most
closely matches the specifications of the original product. Replacement of the
defect product (s) is LumeGen’s sole warranty obligation, and case or credit
refunds will not be offered.
This Limited Warranty is subject to the following conditions:
- Seller is not responsible for incidental and consequential damages that may occur during the return of the product to the seller.
- This warranty is extended only to the original purchaser of the product from Seller. This warranty does not cover any thirdparty products or devices used in conjunction with the product purchased.
- Seller will not be responsible for any type of removal or re-installation costs, including labor and/or equipment charges or expenses, and will not be responsible for shipping costs or expenses to return the product(s) back to the Seller.
- This warranty covers products purchased in, and used within, the United States or Canada. No agent, distributor, or dealer is authorized to change, modify, or extend the terms of this Limited Warranty on behalf of LumeGen.
- For warranty or other questions, please call 800-988-6977 or email customerservice@onlinestores.com.
LumeGen | 1000 Westinghouse Drive STE 1, New Stanton PA 15672 |
800-998-6977 |
Lightup.com
Specifications and dimensions subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>