SVDPET X2 Hammock Cat Toy Installation Guide
- June 4, 2024
- SVDPET
Table of Contents
SVDPET X2 Hammock Cat Toy
PARTS
- Shelf
- Wall mount (x2)
- Carpet
- Toy hook
- Toy rope
- Wall mount connection screw (x2)
- Toggle bolt for drywall (x4)
- Screw and anchor for cement or masonry wall (x4)
INSTALLATION
-
Tape the installation template page (included in the package) at the desired location, then drill the holes as indicated on the template. Please read the instructions outlined on the template before drilling holes.
For strongest weight-bearing support:
Place one end of the shelf on your wall where there is a stud. Once you locate the stud, screw and secure the shelf directly on the drywall with the wall mount screws (#8). Pre-drilling a hole on the drywall is NOT necessary when securing to a stud. -
Insert the wall mounts to the shelf. Align the connection holes. Insert then tighten the connect screws.
-
A. Install on drywall (not on a stud): Insert the toggle bolt on the hammock wall mount. Put the spring wing on the toggle bolt. Insert the spring wing into the drilled holes. Tighten the toggle bolt with the Allen key in the package.
B. Install on cement or masonry wall: Insert anchors into the drilled holes. Align the holes of the shelf wall mount to the anchors in the wall, insert then tighten the screws. -
Screw in the toy hook. Hang the toy rope on the hook and then attach the cat toy to the rope.
Scan the QR Code to access the installation guide online.
SVD.PET is a registered trademark of Silicon Valley Devices LLC.
@2023 Silicon Valley Devices LLC. Palo Alto CA 94306
www.SVD.PET
Contact us: support@svd.pet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>