betterair BA-biologic-mini Portable Probiotic Air Purifier User Guide
- June 4, 2024
- betterair
Table of Contents
betterair BA-biologic-mini Portable Probiotic Air Purifier
Product Specifications
- Technology: Dual-purpose dispersion system
- Operation Modes: Continuous dispersion (Mode 1), Automated mode (Mode 2)
- Refill Duration: Mode 2 lasts about 11-12 weeks
- LED Indicators: Green (dispersing), Blue (idle), Red (recharge), Blue & Red (recharging)
- Power Source: C-type cable (USB charger not supplied)
Product Usage Instructions
Refill Replacement
- Place the device and refill on a surface.
- Hold the base and the cap.
- Turn the cap counterclockwise to unscrew the empty bottle. Carefully unscrew the refill bottle cap.
- Flip the device onto the new bottle.
- Keep the unit and bottle vertical while screwing the bottle into the base counterclockwise.
- Close the cap and reattach it clockwise.
- The device is now ready for use.
Operation Modes
Mode 1: Continuous Dispersion
Fog the area for about 30 seconds by pointing the device vertically to the
floor in all directions of your room/vehicle/office.
Mode 2: Automated Mode
The device will disperse once an hour for a few seconds. Lasts about 11-12
weeks with Mode 2 alone.
Shutting Down the Device
Press and hold the power button for about 3 seconds until the LED colour
turns blank.
LED Color Indications
- Green : Device disperses
- Blue: Idle between dispersion
- Red : Recharge device – connect to a certified USB charger
- Blue & Red: The device is recharging
BioLogic mini
BioLogic mini–first use and refill guide.
The Only technology for total protection of the entire indoor space
Operations
The device is a dual-purpose dispersion system:
A rapid, light touch of the power button enables the selection of operation
modes. The Green LED should flash once before entering mode one and twice for
mode 2
Mode 1: Continuous dispersion
The device operates as an electronic fogger where a fast cleaning of
contaminated areas is desired. Fog the area for about 30 seconds by pointing
the device vertically to the floor in all directions of your
room/vehicle/office.
Mode 2: Automated mode
- 24 X 7 continuous, automatic protection of your space.
- The device should momentarily disperse only once an hour for a few seconds Using Mode 2 alone – the refill should last about 11-12 weeks.
Shutting down the device
- Continued long press the power button for about 3 seconds.
- The LED colour should turn blank.
LED colour Indications:
- Green – device disperses
- Blue – Idle between dispersion
- Red – Recharge device – connect to the device the supplied C-type cable to a certified USB charger (not supplied)
- Blue & Red – The device is properly recharging.
When the LED is Green, but the device does not disperse, the refill tank is empty. REPLACE REFILL
The Only technology for total protection of the entire indoor space
SURFACES | OBJECTS | AIR
Scanner
Follow the refill replacement procedure.
FAQ
- Q: How often should I replace the refill?
- A: The refill should be replaced when the LED is green, but the device does not disperse, indicating the tank is empty.
- Q: How long does Mode 2 last before needing a refill?
- A: Mode 2 lasts about 11-12 weeks before requiring a refill.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>