Sygonix 2992337 DIN Rail Mounted Heating And Cooling Thermostat User Manual

Sygonix 2992337 DIN Rail Mounted Heating And Cooling Thermostat

Product Information

Specifications

• Product: DIN Rail Mounted Heating and Cooling Thermostat
• Item Number: 2992337
• Installation: Requires specialist electrical knowledge
• Safety: Various safety features and precautions outlined in the manual
• Operating Environment: Specific conditions for safe operation detailed in the manual

Product Usage Instructions

Safety Instructions
Before using the DIN Rail Mounted Heating and Cooling Thermostat, please read and understand all safety instructions provided in the manual.

Specialist Knowledge Required
The product must only be installed by individuals with relevant electrical knowledge. Programming and operation should be carried out by authorized personnel with adequate understanding of the device settings.

General Guidelines

• Avoid placing the product within reach of children or pets.
• Dispose of packaging materials properly to prevent potential hazards.
• Contact technical support for unanswered questions.
• Any maintenance, modifications, or repairs should be done by a qualified technician or authorized repair center.

Handling
Handle the product with care to avoid damage from jolts, impacts, or falls. Protect it during transportation and installation.

Operating Environment

• Avoid subjecting the product to mechanical stress.
• Protect from extreme temperatures, flammable gases, and moisture.
• Avoid direct exposure to sunlight.

Operation
If safety during operation is compromised, cease use immediately and follow proper procedures for shutdown. Use appropriate tools and protective gear when necessary. Ensure correct electrical installation per guidelines provided in the manual.

Disposal
Follow the specified disposal guidelines for proper recycling of the product. Contact authorized waste collection points for safe disposal.

FAQ (Frequently Asked Questions)

• Q: Can children operate this thermostat?
  A: No, the product should be kept out of reach of children and operated only by authorized individuals with appropriate knowledge.

• Q: What should I do if the product is damaged during handling?
  A: If the product is damaged, contact a qualified technician for assessment and repairs to ensure safe operation.

Safety Instructions
DIN Rail Mounted Heating and Cooling
Thermostat
Item no: 2992337

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

• The product is a heating and cooling thermostat with a wired NTC sensor. The product is intended to be used to control heating and cooling systems. The product must be mounted on a TS35 DIN rail inside an electric distribution box.
• The product is intended for indoor use only. Do not use it outdoors.
• Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be damaged.
• Improper use can result in short circuits, fires, electric shocks or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instruc-tions and any accompanying instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liab-ility for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

Specialist knowledge required

• The product must only be installed by persons with relevant electrical knowledge.
• The product must only be programmed and operated by authorized people with sufficient knowledge about the consequences of different settings.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Operation

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

Electrical installation
WARNING!  Safety hazard!
The product should only be installed by people with relevant electrical knowledge and experience! *)
If it is not installed properly, you risk:

• your own life

• the life of user of the electrical device

• severe damage to property, e.g., by fire

• personal liability for personal injury and material damage
  Always consult an electrician!
  *) Technical knowledge required to perform the installation:
  For the installation, the following specialist knowledge is required in particular:

• The “Five safety rules”: Disconnect from the mains; protect against accidental switch-on; ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts

• Use of suitable tools, measuring devices and personal protective equipment, where necessary

• Analysis of measurement results

• Use of electrical installation materials to meet the requirements for disconnection

• IP protection ratings

• Installation of electrical installation materials

• Type of power supply (TN system, IT system, TT system) and the corresponding connection criteria (classic earthing, protective earthing, necessary additional measures etc.)

If you are not a professional, do not do it yourself, have it performed by a specialist.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

• Relay switch type………………………. 1 pole
• Input voltage ……………………………. 220 – 240 V/AC
• Input AC frequency …………………… 50/60 Hz
• Output voltage …………………………. 220 – 240 V/AC
• Standy power consumption ………… approx. 0.8 W
• Current range …………………………… 0 – 5 A
• Relay delay time……………………….. 0 – 300 s
• Temperature measuring range……. -20 to +100 °C
• Temperature sensor ………………….. NTC 10K
• Sensor temperature correction……. -15 to +15 °C
• Accuracy………………………………….. ±1 °C
• Sensor wire length…………………….. 2 m
• Installation method ……………………. DIN Rail TS35
• Cable type ……………………………….. H05VV-F 3G 0.5 – 6 mm2
• Operating temperature ……………… 0 to +50 °C
• Operating humidity …………………… <93 % RH (non-condensing)
• Storage temperature …………………. 0 to +50 °C
• Storage humidity ………………………. <93 % RH (non-condensing)
• Dimensions (W x H x D) (approx.) . 35.4 x 95 x 60 mm
• Weight (approx.) ………………………. 175 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2992337_V3_0324_jh_ss_en 54043196687368715 I7/O3 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>