SAMSUNG HW-LS60D Dolby Atmos Soundbar User Guide

: June 4, 2024
: Samsung

Table of Contents

SAMSUNG HW-LS60D Dolby Atmos Soundbar
SAFETY INFORMATION
PRECAUTIONS
CHECKING THE CCOMPONENTS
PRODUCT OVERVIEW
CONNECTING THE POWER
CONNECTING THE SMARTTHINGS APP
CONNECTING VIA WIFI WITH TV
USING THE Q-SYMPHONY FUNCTION
CONNECTING VIA BLUETOOTH WITH MOBILE
TROUBLESHOOTING
IMPORTANT NOTE ABOUT THE SERVICE
SPECIFICATIONS AND GUIDE
Correct Disposal of This Product (Waste Electrical & Electronic
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAMSUNG HW-LS60D Dolby Atmos Soundbar

SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar-PRODUCT

Specifications

Model: HW-LS60D
Power Input: DC 19V
Connection: Optical, SmartThings Dongle
Buttons: Multi Function, Mic On/Off
LED Indicator: Yes

Checking the Components
Ensure you have all the components including Holder-Plate x 8 and Holder-Guide x 1.

Product Overview
Front: Display of buttons and indicators for easy access.
Rear: Connection ports for power and external devices.

Connecting the Power
Connect the AC/DC power adapter to the DC 19V port on the Wireless Speaker. Use the (Multi Function) button to turn on the speaker and change modes. Use the (Mic On/Off) button to control the microphone.

You can access the User Guide on Samsung’s on-line customer support center by scanning the QR code on the left.
To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.com/support

SAFETY INFORMATION

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $2$$ WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.\

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times

PRECAUTIONS

Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
Protect the product from moisture (i.e. vases),
and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the
unit malfunctions. Your product is not intended
for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

CHECKING THE CCOMPONENTS

Wireless Speaker main unit
Stand
AC/DC Adapter
Power Cord
Photo Frame
- Holder-Plate x 8
- Holder-Guide x 1
Wallmount
Component
- Wallmount Guide
- Bracket-Wall
  Rear x 1
- Screw (M5 X L55) x 2
- Anchor x 2
- Holder-Screw x 1
- Spacer x 4

NOTE

To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.

PRODUCT OVERVIEW

Front

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $4$$

Rear

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $5$$

CONNECTING THE POWER

Connecting the power and units

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $7$$

For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Wireless Speaker Main Unit)

CONNECTING THE SMARTTHINGS APP

Installation
- The SmartThings app allows you to control the functionality of and adjust the settings of the Wireless Speaker.
- Download the SmartThings app from the app store of your mobile device, or simply scan the provided QR code and download the app
Device registration
Run the SmartThings app on your mobile device.
Follow the on screen instructions and add the Wireless Speaker to your mobile device.
If the automatic pop-up window does not appear, press ( ) on the Home screen to register the Wireless Speaker.
Control with SmartThings
With the SmartThings app open on your device, select the Wireless Speaker that you have added.
The settings menu of the Wireless Speaker appears, where you can adjust the various settings including volume, sound mode or fine-tuning.

NOTE
The illustration below may differ with the app version.

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $10$$

CONNECTING VIA WIFI WITH TV

Wi-Fi connection is available only on Samsung TV.
The TV and Wireless Speaker must be connected to the same wireless network (Wi-Fi).
The menus may differ depending on the year of manufacture, refer to your TV manual.

Change the input source of the TV by using the Audio menu to Wireless Speaker. ‒ Samsung TVs released in 2017 or later : ( ) → Sound → Sound Output → Music Frame (Wi-Fi)

USING THE Q-SYMPHONY FUNCTION

This function is supported only when the Wi-Fi is connected.
It is available with new Samsung TV models to be released 2024.
• To use this function, both the wireless speaker and the TV must be connected to the same Wi-Fi network.

When the Wireless Speaker connects to a Samsung TV that supports the Q-Symphony function, you can play the sound simultaneously through the Wireless Speaker and the TV. If you use the Q-Symphony function, the surround sound played on the Wireless speaker allows you to enjoy a richer, more three- dimensional surround sound effect.
When the Wireless Speaker is connected, “Q-Symphony” menu appears on the TV. (The message displayed may differ with the TV model.)
(Settings ( ) → All Settings ( ) → Sound → Sound Output)

CONNECTING VIA BLUETOOTH WITH MOBILE

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $12$$

Press (Multi Function) button to go Bluetooth Mode.
Press (Mic On/Off) button for 5 seconds for pairing.
- It is also available to pair by pressing [ ] on the SmartThings App screen of your mobile device.
  $SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $16$$
Search for the Bluetooth device on your TV or mobile device.

TV can be connected in the same way.

$SAMSUNG-HW-LS60D-Dolby-Atmos-Soundbar- $17$$ NOTE

If asked for a PIN code when connecting a Bluetooth device, enter <0000>

TROUBLESHOOTING

Before seeking assistance, check the following.
Wireless Speaker does not turn on.

Check whether the power cord of the Wireless Speaker is correctly inserted into the outlet. Wireless Speaker works erratically.
After removing the power cord, insert it again.
Try again after initializing the product.
If there is no signal, the Wireless Speaker automatically turns off after a certain period of time. Turn on the power.
The red LED indicator light on the Wireless Speaker stays on.
The microphone is turned off. Turn on the microphone.

Sound is not output from the Wireless Speaker.

The volume of the Wireless Speaker is too low or muted. Adjust the volume.
When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
For sound output of the TV, select Wireless Speaker.
(Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Select Wireless Speaker)
Remove the cable from the Wireless Speaker and then reconnect it.

Wireless Speaker will not connect via Bluetooth.

When connecting a new device, switch to “BT PAIRING” for connection. (Press the (Mic On/Off) button on the body for at least 5 seconds.)
Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung
TV: Home ( ) → Menu → Settings ( ) →
All Settings ( ) → Sound → Sound Output → Bluetooth Speaker List)

Sound drops out when connected via Bluetooth.

Some devices can cause radio interference if they are located too close to the Wireless Speaker. e. g. microwaves, wireless routers, etc.
If your device that is connected via Bluetooth moves too far away from the Wireless Speaker, it may cause the sound to drop out. Move the device closer to the Wireless Speaker.
If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, the sound may drop out. Check the installation environment and conditions for use. Wireless Speaker will not connect to Wi-Fi.
Make sure the wireless router is turned on and then reconnect the wireless router after rebooting.
The Wireless Speaker will not connect if the wireless signal is too weak. Try moving the router closer to the Wireless Speaker, or eliminating any obstacles that are between the Wireless Speaker and the router, if possible.
The Wireless Speaker does not turn on automatically with the TV.
When you turn off the Wireless Speaker while watching TV, power synchronization with the TV is disabled. First turn off the TV.

IMPORTANT NOTE ABOUT THE SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
An administration fee may be charged if either (a) an engineer is called out at your request and there is no defect with the product (i.e. where the user manual has not been read). (b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

SPECIFICATIONS AND GUIDE

Model Name : HW-LS60D
Weight :
Without Stand : 4.2 kg
With Stand : 4.6 kg
Dimensions (W x H x D) :
Without Stand 353.0 x 353.0 x 54.2 mm
With Stand 353.0 x 364.8 x 143.4 mm
AMPLIFIER Rated Output power : 120W
Operating Temperature Range : +10 °C to +40 °C
Operating Humidity Range : 10 % to 80 %, non-condensing
Storage Temperature Range : -20 °C to +45 °C
Storage Humidity Range : 5 % to 95 %, non-condensing
Supported play formats
Dolby 5.1ch / Dolby Digital Plus /
Dolby ATMOS (Dolby Digital Plus) / LPCM 2ch

NOTE

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate. Overall Standby Power Consumption (W) 2.0 W

To activate/deactivate Wi-Fi connection

Press and hold the (Mic On/Off) button and the – button on the side panel simultaneously for more than 30 seconds. This will turn on or off the Wi-Fi connection.
To activate/deactivate Bluetooth connection
Press and hold the (Mic On/Off) button and the + button on the side panel simultaneously for more than 30 seconds. This will turn on or off the Bluetooth connection.
Precaution : The Wireless spreaker will restart automatically if you turn on/turn off Wi-Fi or Bluetooth.
Hereby, Samsung declares that this radio equipment is in compliance with Directive 2014/53/EU and the relevant UK statutory requirements.
The full text of the declaration of conformity is available at the following internet address:
http://www.samsung.com go to Support and enter the model name.
This equipment may be operated in all EU countries and in the UK.
The 5GHz WLAN(Wi-Fi or SRD) function of this equipment may only be operated indoors.
WIRELESS DEVICE OUTPUT POWER
RF max transmitter power :
100mW at 2.4GHz-2.4835GHz,
200mW at 5.15GHz-5.25GHz & 5.47GHz – 5.725GHz 100mW at 5.25GHz-5.35GHz

[ENERGY STAR] ENERGY STAR qualified model only

Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification.
Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices.
Refer to www.energystar.gov for more information of the ENERGY STAR Program.

ENERGY STAR qualified model only (The other models)

As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency.

Correct Disposal of This Product (Waste Electrical & Electronic

Equipment)

(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g. REACH, WEEE, Batteries, visit:
www.samsung.com/uk/aboutsamsung/sustainability/environment/our- commitment/data/
COMMISSION REGULATION (EU) 2019/1782 Ecodesign requirements for external power supplies : www.samsung.com/global/ecodesign_component

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre.

Country/ Region|

Samsung Service Centre (

|

Web Site

| | Country/ Region|

Samsung Service Centre (

|

Web Site

|
---|---|---|---|---|---|---|---
UK| 0333 000 0333| www.samsung.com/uk/ support| CZECH| 800 – SAMSUNG

(800-726786)