goodram MEMORY CARDS microCARD User Manual
- June 3, 2024
- goodram
Table of Contents
MEMORY CARDS microCARD
User Manual
MEMORY CARDS microCARD
Thank You for choosing GOODRAM product. Before the first use, please read this
user manual to learn about how to use and store this product.
We recommend to retain this manual for future read.
REFERS TO THE FOLLOWING PRODUCTS:
GOODRAM microCARD M400/M40A
GOODRAM microCARD M1A0/M1AA
GOODRAM microCARD M3AA
GOODRAM M404/M1A4 (ALL in ONE)
IRDM by GOODRAM microCARD IR-M2AA
IRDM by GOODRAM microCARD IR-M3AA and future products from the series
SYMBOL EXPLANATION
Below you will find explanation of symbols used in this manual. Please read this important information before continuing.
Manufacturer declares that this product, marked with CE sign, conforms with
the essential requirements contained in EU directives Responsible for CE
marking is Wilk Elektronik SA, with its registered office in Laziska Gorne
43-173, Mikolowska 42, Poland. Copy of the declaration can be obtained by
contacting Wilk Elektronik SA.
This product may not be treated as a household waste. It should be utilized in
appropriate recycling center.
The product can be recycled which means that materials used for its production
can be reused.
The product is not a toy and is not intended for children under the age of
three.
It is forbidden to place the product near the naked flame.
It is forbidden to immerse any part of this product in water or other liquid,
especially when it operates.
It is forbidden to expose this product to potential damage and excess heat or
extremely low temperatures that do not comply with the product specification.
USAGE AND COMPATIBILITY
Mass storage device intended for data transfer and storage in mobile
electronic devices, such as cameras, smartphones, laptops and notebook.
This product is compatible with the following operating systems:
- Windows® XP® / Vista / 7 / 8 / 8.1 / 10
- Mac OS X 10.4 and newer
- Linux
This product is dedicated for consumer-class applications. It is not intended
to be used in systems that require high performance or high reliability (e.g.
industrial applications), unless it is stated that the product is
dedicatedfor these applications.
Speed class notification and UHS symbol indicates the minimum write speed.
Speed class notifications that are defined by SD Association are class 2, 4, 6
and 10.
Compatibility with devices (host):
- SD host – SD cards
- SDHC host – SD and SDHC cards
- SDXC host – SD, SDHC and SDXC cards
INSTRUCTION OF USAGE
Plug the memory card into a dedicated micro card slot. To use micro card in a
device with standard card slot only, please use the attached adapter (if there
is any). After connecting, the card is ready to write data. Some host devices
may require an additional formatting of the card before use.
To get more information, please read the technical specification or product
manual of the host device.
CAPACITY
Storage capacity for GOODRAM micro card is always expressed in decimal values.
That means, 1GB equals 1 000 000 000 bytes. Operating system that use the
binary conversion eg. 1GB equals 1 073 741 824 bytes may show lower storage
capacity value than advertised. Additionally, a part of the storage is
reserved for files and firmware, managing the drive.
SAFETY MEASURES
To ensure the best user experience and safe use, please follow the precautions
listed below:
Do not:
- expose this product to potential damage and excess heat or extremely low temperatures
- immerse any part of this product in water or other liquid
- place the product near the naked flame Caution:
- provide accurate heat dissipation
- this product is not a toy and is not intended for children under the age of three
- use this product only with compatible devices
MANUFACTURER’S WARRANTY
Warranty conditions are listed in separate document, available at product
website at www.goodram.com/warranty
MANUFACTURER
Wilk Elektronik SA
Mikolowska 42
43-173 Laziska Gorne
Poland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>