Bluedio T6(could-based version) User Manual
- June 2, 2024
- Bluedio
Table of Contents
User Manual
Model: Bluedio T6 (could-based version)
Headphone Overview
Operation instruction:
Power on:
when headphone is off, press and hold MF button until! you hear “Power on”.
Power off :
When the headphone is on, press and hold MF button until! you hear “power
off”.
Pairing mode:
When the headphone is off, press and hold the MF button until you hear “Ready
to pair”.
Bluetooth Pairing:
Make sure the headphone enter pairing mode( see instruction “Pairing mode”),
and turn on Bluetooth function of your phone, select “T6”.
Music control:
When playing music, press the MF button once to Pause/Play. (Users can
increase/reduce volume, or skip to previous/next track via cellphone control.)
Answer/Reject a call:
Receiving an incoming call,press the MF button once to Answer/End; Press and
hold it for 2 seconds to refuse.
ANC switch:
Push the ANC switch to turn on the ANC function, in about 3 seconds, ANC will
be on, and LED light remains green.
Line-in music playback:
Connect the headset with your mobiles phone and computers via 3.5mm Type-C
audio cable to play music. Note: Please turn off the headphone before using
this function. (audio cable is not provided, if you need it, please order one
from Bluedio official purchase channel.)
Line-out music playback:
Connect headphone 1 with phone via Bluetooth, then turn off ANC feature.
Connect headphone 1 with the headphone 2with 3.5 mm Type-C audio cable to play
music. Note: Please turn off ANC feature before using this function, and
headphone 2 should support 3.5 mm audio connection. (audio cable is not
provided, if you need it, please order one from Bluedio official purchase
channel.)
Charging the headphone:
Switch off the headset before charging, and use standard charging cable to
connect the headphone or wall charger, when it is charging, LED light remains
red. Allow 1.5-2 hours for full charging, once fully charged, LED blue light
stays on.
Cloud function:
The headphones support Cloud service. Users can download the APP by scanning
the QR code on the last page.
Wake up the cloud( installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake
up the Cloud. Cloud service is on, you can enjoy smart Cloud service.
Specifications:
Bluetooth version: Bluetooth5.0
Bluetooth range: up l0 10 m (free space)
Transmission frequency: 2.4GHz-2.48GHz
Bluetooth Profiles:A2DP, AVRCP, HSP, HFP
Driver units: 57mm
Noise cancelling sensitivity:- 25dB Impendence: 160
Frequency response: 15 Hz-25KHz
Sound pressure level(SPL):115dB
Standby time: about 1000 hours
Bluetooth music/talk time: about 32 hours
Working time( For Only Running the ANC): about 43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -10.0 to 50.0 only
Charging voltage/current: 5V/500rnA
Power Consumption: 50mW,50mW
Purchase verification
You can find the verification code by scraping the coating off the security
label that is affixed to the original packaging. Enter the code on our
official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at [email protected];
Or to call us at 400-889-0123.
Common issues and solution:
Bluedio T6(could-based version) User ManualDownload
Questions about your Manual ? Post in the comments!