LG Wireless Sound Bar [SN6Y] User Manual
- June 2, 2024
- LG
Table of Contents
SIMPLE MANUAL
LG Wireless Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SN6Y
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
FCC Radio Frequency Interference Requirements:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 1000 Sylvan Ave Englewood Cliffs, NJ 07632
Telephone (201)266-2215
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
Printed in China
Front Panel
The buttons are located on the side.
(Standby) · · · · · · · · · ·Switches the unit ON or OFF.
F (Function) · · · · · · · · · · · · · · · · · · Selects function.
-/+ (Volume) · · · · · · · · · · · · · · · · · · · ·Adjusts volume.
Rear Panel
DC IN, 5 V 500 mA, Optical In, HDMI IN, TV ARC HDMI Out
DC IN · · · · · · · · · · · · · · · · · · · · ·Connect to the AC adapter.
USB Port · · · · · · · · · · · · · · · · · · · ·Connect to a USB device.
OPTICAL IN · · · · · · · · · · · ·Connect to an optical device.
HDMI IN · · · · · · · · · ·Connect to device with HDMI OUT.
(TV ARC) HDMI OUT · · · · · · · · · · · · · · · Connect to a TV.
- It is recommended that you purchase a USB gender separately for the convenience of USB insertion and extraction. (Recommended USB gender type : USB 2.0 extension cable)
- Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and follow steps below.
- Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
- Turn on the sound bar.
- The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.
- Press PAIRING on the rear of the wireless subwoofer.
• The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the PAIRING.)
- Turn on the sound bar.
• Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.> 1 m 3.3 ft
TV Connection
Connect the sound bar and TV using Optical (A) or HDMI ARC (B).
A Optical Connection
- Connect the sound bar to the TV using Optical cable.
- Set up [External Speaker (Optical)] on your TV setting menu.
TV Optical Out, Optical In
B HDMI (ARC) Connection
- Connect the sound bar to the TV using HDMI cable.
- Set up [External Speaker (HDMI ARC)] on your TV setting menu.
TV HDMI IN (ARC), (TV ARC) HDMI OUT
- HDMI connection is unavailable if your TV does not support HDMI ARC.
- If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.
Additional Device Connection
- Connect to the external device like as follow.Set-top Box, Player etc, HDMI Out, HDMI In, Optical Out, Optical In, HDMI In ARC, TV ARC HDMI Out
- Set the input source by pressing F repeatedly.
Remote control
Replacement of Battery
Remote, Replacement of Battery, Vol, Sound Effect, Folder, Repeat, Skip, Search, Play, Pause
Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit Bluetooth connection to only BT and LG TV.
SOUND EFFECT: Selects a sound effect mode.
-TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
FOLDER^/v: Searches a folder.:
Displays the information of a file, an input source or connected Bluetooth device name.
-Auto Power ON/OFF: Long press and press it again.:
Adjusts sound level of each speaker.
-Surround sound: Long press and press it again.
REPEAT: Listens to your files repeatedly or randomly.
Additional Information
Specification
Power consumption: Refer to the main label.
AC adapter:
- Model : DA-50F25
- Manufacturer : Asian Power Devices Inc
- Input : 100 – 240 V ~ 50 – 60 Hz
- Output : 25 V 0 2 A
Dimensions (W x H x D):
Approx. 1060.0 mm X 57.0 mm X 85.0 mm With foot(41.7 inch x 2.2 inch x 3.3 inch)
Bus Power Supply (USB): 5 V 0 500 mA
Amplifier(Total RMS Output power): 420 W RMS
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
LG Wireless Sound Bar [SN6Y] User Manual – Optimized
PDF
LG Wireless Sound Bar [SN6Y] User Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>