Yamaha EP-E30A Earphones User Manual

: June 2, 2024
: Yamaha

Table of Contents

Introduction
A. Product, Accessory and Part Names
Preparation
B. Charging
C. Making a Bluetooth® connection
Basic operations
- Listening to music
- Using the phone
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YAMAHA EP-E30A Earphones

Introduction

Thank you for purchasing this Yamaha product.

For correct and safe use of this product, be sure to first read this manual and the separate “Safety Brochure”.
After reading this manual, keep it together with the warranty card in a safe place for future reference.

This product is not designed to be waterproof. Do not expose this product to liquids such as sweat, rainwater or seawater

A. Product, Accessory and Part Names

Earphones
Controller
***** The microphone is built in.
Charging connector
Indicator
Function key
Eartips (SS, S, M, L) 1 set each
***** The M-size eartips are attached.
USB power cable
Startup Guide
User’s Guide (Basic) (this manual)
Safety Brochure

Preparation

B. Charging

With the included USB power cable, connect the charging connector on the earphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

The indicator is lit in red during charging and goes off when charging is completed.
Charging takes about two hours. When charged, the earphones can play back continuously for approximately 14 hours

C. Making a Bluetooth® connection

When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

* Pairing

Hold down the function key for at least five seconds to
enter pairing standby.

The indicator flashes alternately in blue and red. 2. Operate the connected Bluetooth device to display the
Bluetooth setting screen.
1. Select “Yamaha EP-E30A” from the displayed screen.
When pairing has completed, the indicator lights up in blue for 20 seconds, then flashes at 5-second intervals.
If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
To try pairing again, turn the earphones off, then on again.

For details on use, refer to the website

* Turning on/off

Hold down the function key on the controller for two seconds to turn the earphones on/off.

After the earphones turn on, the indicator flashes in red to indicate the remaining battery power.

Basic operations

Listening to music

Play: Briefly press the function key once.
Pause: During playback, briefly press the function key once.
Raise the volume: Briefly press the + key once.
Lower the volume: Briefly press the – key once.
Skip to the next song: Hold down the + key for two seconds.
Go back to the beginning of the song, or skip to the previous song: Hold down the – key for two seconds.

Using the phone

Receive a phone call: When a phone call comes in, briefly press the function key once.
End a phone call: During the phone call, briefly press the function key once.
Raise the conversation volume: Briefly press the + key once.
Lower the conversation volume: Briefly press the – key once.
Ignore a call: When a phone call comes in, briefly press the function key twice.

Specifications

Bluetooth version: Version 5.0
Supported profiles: A2DP, AVRCP, HFP, HSP
Supported codecs: SBC, AAC
RF Output Power: Class 2
Maximum communication range: Approximately 10 m (without interference)
Number of devices that can be registered: Up to 8 devices
Internal rechargeable battery: Lithium-ion battery
Charging time: Approximately 2 hours
Continuous playback time: Approximately 14 hours
Charging temperature: 5 – 40 °C