FMBTIS User Manual
- June 2, 2024
- Simple
Table of Contents
User Manual
FMBTIS
Safety Instructions
- Please read this manual carefully before using
- Keep these instructions
- Do not disassemble
- Do not expose directly to sunlight or open flame
- Pay attention to the road and do not operate this product while driving
Introduction
Features:
- Input 12-24v
- 177 Inch TFT color display
- FM transmitter: 88.1-107.9 MHL range
- Bluetooth hands-free calls
- Stream music from smartphone to car audio system via FM transmission
- USB charge ports:
- Type-C: PD 3.0 Suitable for iPhone 18W quick charging
- 5V/24A: Max 2.4A/5V smart charging
- Supports SD card streaming
- USB flash drive
- Supports 3,5mm AUX-in and AUX-output
- Car battery monitor
FMBTIS
- PD3.O charging port.
- 5V/2.4A smart charging port.
- AUX port.
- CH: press and enter into FM frequency change mode.
- Previous song.
- Microphone.
- TFT colorful display
- TF card slot
- USB flash drive port
- Next song.
- Menu button.
- Multifunction Knob button: change frequency /Volume +&-/Answer & End Calls
How to Setup
- Plug FMBTIS into your car cigarette lighter socket. If the FM Transmitter doesn’t automatically power up. simply push the multifunction control button (12) to tum on.
2. LED screen will illuminate when power is on.
3. Bluetooth icon will blink. signaling it is in pairing mode. Go to your smartphone’s Bluetoolh settings and select FMBTIS to connect. Once your device is paired. you will hear the prompt ‘Bluetooth connected successfully.”
4. Turn on your car’s FM radio. and find a vacant (only static noise) channel. Adjust the frequency on 1-MH I IS to match the frequency on your car radio.
5. To adjust the FM transmitter frequency Press “CH” button until the frequency display starts blinking, turn the multifunction control button to adjust the FM frequency to match the frequency on your car radio.
Play Music
Play music on your phone
After Setup steps 1-6. you can start playing audio on your smartphone. the music will stream using Bluetooth from your phone via FM transmission to your car speakers using your car’s radio.
Volume display mode
Turn multifunctional control button to adjust the volume.
Play music from SD cards
Insert the SD card into the card port. FMBTIS will start playing automatically.
Screen Functions
Menu Settings
Under SD card / USB playing status. press and hold “M’ button until the directory list shows up:
Stream your smartphone’s music using your car’s AUX port:
If you can’t find empty channels on your car’s radio. you can use a 3.5mm AUX cable to connect FMBTIS to your car’s AUX input port Make sure you adjust your car radio to AUX setting. Your phone’s audio will now play through your car’s speakers. (AUX cable not included).
Hands-Free call
Once your phone is paired to FMBTIS you’ll be able to answer calls. hands- free!
Charging Your Device
FMBTIS wireless FM transmitter features two USB ports: Type-C : PD 3.0 Suitable for iPhone 18W quick charging 5V/2.4A smart charging port: provides allowed max input current to your devices.
Specifications
- DC input: 12-24V
- Type-C: 5V/2.4A wiht intelligent current input management
- Bluetooth : V5.0
- Audio format : MP3, WMA, FACL , APE, WAV
- FM transmission distance : >2M
- USB capacity support: <64GB
- Working temperature range : -20 ‘C to 40 ‘C
- Storage temperature range: -4o’C to 85’C
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and. if not installed and used in
accordance with the instructions. may cause harmful
interference to radio communications. However. there
is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception. which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received. including interference that may cause undesired operation.
Read More About This Manual & Download PDF:
FMBTIS User Manual – Optimized PDF
FMBTIS User Manual – Original PDF
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>