REAL SIMPLE MOUSE PAD WITH WIRELESS CHARGER User Manual
- June 5, 2024
- REAL SIMPLE
Table of Contents
REAL SIMPLE MOUSE PAD WITH WIRELESS CHARGER
PRODUCT FEATURES
HOW TO USE THE WIRELESS CHARGR
- Connect the wireless charger to a power source using the Micro-USS cable.
- To charge a device, place it in the center of the wireless charger. Indicator light will stay lit while charging.
- When your device is completely charged, remove the device from the charging pad.
IMPORTANT SAFETY INSTRUCTIONS
Failure to follow the safety instructions can lead to fire, electrical shock, personal injury or property damage or damage to this product. Make sure to read the entire manual.
- Using the included micro-USS cable, connect to a computer or wall charger (sold separately) to enable wireless charging. The LED light will show red when it is connected successfully.
- Make sure your phone is compatible for wireless charging.
- Place your phone in the center of the charging plate. The LED light will show blue when it is charging.
- Do not handle the unit, USS cord or wall charger with wet hands. Do not allow water or liquids to be exposed to the product.
- Do not leave the product in a hot location.
- Do not disassemble, modify, repair this product.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Do not place any metallic items on the surface of the product.
- If a non Qi compatible device is used, charger may overheat
- Disable vibration features while charging to ensure vibration does not move the device and lose charge.
- Multiple Qi enabled devices cannot be charged at the same time.
CLEANING
If the Charging Pad needs cleaning, wipe it using a soft, dry cloth. Never use any abrasive cleaning agents. Periodically wipe off any accumulated dust.
SPECIFICATIONS
FCC Disclaimer
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or on experienced radio/TV technician for help or assistance.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or T interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type an maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.