Shenzhenshi shunjingyuan yishusheji youxiangongsi G8 Wireless Headset User Manual

Shenzhenshi shunjingyuan yishusheji youxiangongsi G8 Wireless Headset

Packing List

Name of Each Part

English Voice Prompt

1. When the headset is turned on, there is a voice prompt of “power on”.
2. When the headset is turned off, there is a voice prompt of “power off”.
3. When successfully connected with Bluetooth, there is a voice prompt of “connected”
4. When disconnected with Bluetooth, there is a voice prompt of”disconnected”
5. When the call ended, there is a voice prompt of”call ended”.
6. When the volume reaches the maximum, there is a voice prompt of”volume maximum”.
7. When the volume is at its minimum, there is a voice prompt of”volume minimum”.

How to Wear on Left Ear

In-ear design:
not easy to fall off even in vigorous exercises

1. Rotate the arm of the headset 90° counterclockwise
2. Rotate the arm of the headset 90° counterclockwise again
3. The headset is on the proper status for wear
4. You can put it on your left ear now

How to Wear on Right Ear

For optimal audio experience, choose the earplug which is tight and secure in your ear.

1. Rotate the arm of the headset 90° clockwise
2. Rotate the arm of the headset 90° counterclockwise
3. The headset is on the proper status for wear
4. You can put it on your right ear now

Product Specifications

Features

• Built-in intelligent voice presentation
• Built-in high-resolution microphone, advanced 4x noise cancellation technology
• Ergonomic, lightweight design, 180 rotation applies to left and right ear
• Separate power mute button and volume buttons for easy use and control.
• Easily pair with two Bluetooth devices at once
• Compatible with all Bluetooth-enabled devices and high-fidelity stereo music players

Key Function

MFB

Headset Pairing

Super Easy to Pair

1. Turn on the headset, and the headset will enter into pairing mode
2. Turn on Bluetooth and search for “G8” to connect

Pair with 2 Devices Simultaneously

Allow you to make or receive call while at the same time maintaining other work with ease.

1. Follow the steps of “Headset Pairing” to pair with the first device
2. Turn off the Bluetooth on the first device, and the headset enters into the pairing mode
3. Repeat the steps of “Headset Pairing” to pair with the second device
4. Turn on the first Bluetooth device
5. Turn off the headset, then turn it on again, the headset will automatically connect the second device
6. Click to connect the first Bluetooth device, now the headset has paired with 2 devices simultaneously

Reset

If your device cannot pair with the Bluetooth headset after using the headset for a while. Please reset the headset.

Note: Before resetting, please make sure your headset is unpaired.

Method: Long press the MFB and Volume + buttons for about 5 seconds at the same time, you will see that the rose-colored lamp light up for about 2 seconds, then the red lamp will flash three times and the device will turn off and then return to factory default settings.

After that, delete “G8” Bluetooth records on your phone.
If you have a lot of records in the Bluetooth field of your phone, there is a system bug, and you will not be able to connect to our Bluetooth headset. Please delete the Bluetooth records of the “G8” on your phone.

Three-Way Calling Function (Switching Mode)

Call Waiting

Note: The receiving party’s phone card operator needs to support call waiting to use this feature

1. When you receive a call from caller 1, you can answer the call by pressing the MFB button once.
2. When you are on a call with caller 1 and a call comes in from caller 2.
3. Press the MFB button once to end the call with caller 1 and answer the call with caller 2.
4. if you press the MFB button twice in quick succession, you can answer the call of the caller 2 and keep the call with the caller 1 on hold.
5. lf you want to call caller 1 again, press the MFB button twice in quick succession to switch the call to caller 1 and keep the call with caller 2 on hold.

Charging the Charging Case

WARNING:
When using the charging case for the first time, please charge it with the attached Type-c cable until it is fully charged.

1. During charging, the battery percentage of the charging case is displayed.
2. After completing charging, if the charging cable is unplugged, the battery percentage will always show 100%.
3. After completing charging, unplug the charging cable, the battery percentage display will disappear after 5s.

Charging the Headset

1. Place the Bluetooth headset in the charging case. (P1)
2. Attach the charging contact of the Bluetooth headset to the charging pin of the charging case. (P2)
3. When charging the Bluetooth headset, the red light on the headset will turn on and the two poles on the charging case will flash, indicating that the headset is charging. After the headset is fully charged, the blue light will flash once and then turn off, and the poles in the charging case will also turn off. In this state, the headset is fully charged.

Troubleshooting

About the Product

• This product is not guaranteed to work with all Bluetooth devices.

• Do not charge the battery for a long time.

• The battery (built-in lithium polymer battery) can be recharged approximately 300-350 times depending on the conditions of use.

• The battery (built-in lithium polymer battery) is consumable, so it is not covered by the warranty.

• If the battery is fully charged, but the usage time is significantly shortened or the battery cannot be used, the battery has reached the end of its usefui life.
  We do not replace batteries. Please purchase a new one.

• If the product is not used for a long time, the performance of the built-in battery may deteriorate.

• If the product is to be stored for a long period of time, charge the battery at least once a month.

• Do not charge the product when it is wet, otherwise it may cause fire or malfunction due to electric shock or short circuit.

• Be sure to unplug the cable when charging is completed.

• If the battery is charged for longer than the specified charging time, the battery may overheat or catch fire.

For good communication

• Please communicate in a place where there is a good line of sight to other equipment.
• Depending on the structure of the building and obstacles, the communication distance may be shorter.
• If equipment is placed between reinforced concrete or human bodies (in contact with each other), noise may be generated, communication may be disabled.
• When connecting and using music/audio devices such as Bluetooth headsets, headphones, speakers, etc. at the same time, music or sound may be interrupted.
• When using a Bluetooth connection, do not use it near a wireless LAN or other wireless devices or in radio waves such as microwave ovens.
• Do not use the product in an environment with poor reception, since it may cause frequent connection interruptions, extremely slow communication speeds,and errors.
• If you cannot communicate properly near radio equipment or broadcasting stations, change the location of use.

WARNING

• When using on foot, please pay close attention to the surrounding traffic to prevent traffic accidents.

• Minimize the volume before use. Sudden loud noises may damage your hearing.

• To protect your ears, do not turn the volume up too high.

• If flammable substances, water or other liquids are spilled inside the unit, stop using it and consult the dealer from whom you purchased it or our company.
  If you continue use it, it may cause fire, malfunction or electric shock.

• Opening the inside of the equipment may result in malfunction or electric shock hazard. Do not touch the inside of the equipment. No warranty is given for degradation of product performance due to internal modifications.

• Do not charge the battery or touch the charging port with wet hands, as this may result in electric shock.

• If you feel uncomfortable while using the product, stop using it immediately.

• If you are using a cardiac pacemaker or other medical device, consult a doctor before use.

Contact us

1. Open your order history on amazon. On that screen, click on sales: Our Store.
2. Click the “Ask a question” button on the store page.
3. Select the subject line in the “Inquiry” field, fill in your message if necessary, and send it.
4. Please note that we will reply your message within 24 hours.

FCC Statement
Conditions: This device complies with part 15 of the FCC Rules. Operation is subject to the following two

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may causeundesired operation.
3. Reorient or relocate the receiving antenna.
4. Increase the separation between the equipment and receiver.
5. Connect the equipment into an outiet on a circuit different from that to which the receiveris connected.
6. Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates.uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC Statement: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used as portable exposure without any restriction.

Manufacturer:
Daximen (Shenzhen) Technology Co., Ltd

Address:
Chuanghui Building 2002, Wuhe Community, Bantian Street,Longgang District, Shenzhen
Email: ryan.ye@hotmail.com

WSJ Product LTD
Unit 1 Alsop Arcade, Browniow HAl,Liverpool L3 STX, GB
info2@wsi-product.com
44915739381310

WSJ Product LTD
Eschbomer Landstraße 42-50,50489 Frankfurt, Germany
info2@wsj-product.com
14915739381310

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>