XPOtool 62948 Universal Kayak Holder User Manual
- June 5, 2024
- XPOtool
Table of Contents
XPOtool 62948 Universal Kayak Holder
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown. Although WilTec Wildanger Technik
GmbH has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you.
-
Send us an e-mail to: service@wiltec.info
-
or use our contact form: https://www.wiltec.de/contacts/
-
The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
-
Our postal address is: WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany
-
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
-
Retourenabteilung
WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany -
E-mail: service@wiltec.info
-
Tel: +49 2403 55592–0
-
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Safety instructions
- The steel cable cannot prevent that your kayak might be stolen.
- Do not allow children to play inside, on, or around the support.
- Any incorrect mounting and/or use of the support may lead to serious injuries and/or death.
- Do not exceed the maximum charge capacity of 80 kg.
- When mounting the support to a concrete wall, you must check first that the wall has enough stability to do so. Any wall not having sufficient stability can lead the screws to tear off and the kayak to fall.
- Any incorrect mounting can lead to damages or injuries.
Scope of delivery
| Name | Qty. |
|---|---|
| Stainless-steel support | 2 |
| Hexagon tension screw (M6×50) | 8 |
| Flat washer | 10 |
| Plastic anchor | 10 |
| Steel cable | 1 |
Tools needed for mounting (not included)
- Lock
- Measuring tape
- Screwdriver
- Electric drill machine
- 5 mm (3⁄16″) drill
- Percussion drill, 8 mm (5⁄16″) drill (for concrete walls)
Notes!
- If mounting the support to a thick drywall or wall plaster, you might must buy longer screws.
- If mounting the support to a drywall, it is enough to screw the screws in by hand.
Assembly
-
With a measuring tape, determine the height and distance of the supports as well as the distance of the screws.
-
The supports are mounted to between 35 % and 45 % of the length of your kayak.
-
Do not mount the supports on a height that you cannot reach. Make sure that both supports are level.
-
With an electric drill machine, drill pilot holes for the screws with a 5 mm (3⁄16″) drill.
Note! Drill pilot holes for the plastic rawlplugs with a percussion drill and an 8 mm (5⁄16″) drill when mounting the device to a concrete wall. -
Insert the screws into the pilot holes through the holes of the support. Tighten the screws with a screwdriver. Do not tighten the upper screw entirely, first insert the lower screw. Then tighten both screws.
Use
- Lift your kayak into the support.
- Guide the steel cable through the kayak. Place the cable so that either end reaches the locking holes.
- Lock either end of the cable and the locking holes with each other.
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>