Taggerlink BAFUfVuF9e8 Zappy Cards User Manual

Taggerlink BAFUfVuF9e8 Zappy Cards

Specifications

• Product Name: Taggerlink
• Compatibility: NFC-enabled devices
• App: NFC TOOLS app (Free)
• Link Generator: Online free Generator

Programming Your Taggerlink

1. Get your Google business review link using an online free Generator.
2. Download the NFC TOOLS app (Free) on your device.
3. Add your Google review link to the app by following the steps provided.
4. Tap or scan your Taggerlink product to complete the setup.

Programming Multiple Cards

To program multiple cards with different links:

1. Repeat the scanning process on each card.
2. Delete the existing link, paste the new one, and click ‘write’ to program the next card.

Troubleshooting

• Write Error: If encountered, re-scan and ensure proper distance while tapping or scanning. Check link byte size; keep it under 1,000 bytes.
• Error on Google Page: Double-check the URL for correct spelling and formatting, ensuring no spaces at the end.
• Programmed but Not Responding: Remove any business information from the link if present.
• Working with iPhone but Not with Android: Check NFC settings, avoid metal interference, and address scanning issues.
• Can’t Download App: Ensure device NFC support; try a different NFC-compatible device.
• Slow Response When Scanning: Avoid metal interference or thick coverings around the device orTaggerlink.

Once programmed, start collecting reviews with Taggerlink daily to enhance your business!

FAQ:
Q: How can I contact support for further assistance?
A: If you encounter issues, please fill out the CONTACT US FORM with detailed information about your problem for review.

Congrats on your taggerlink order!

To Program your Taggerlink please follow the steps below：

How to get your Google business review link

use online free Generator

1. Step 1: Click the below link to create your Google review link!
   https://www.heroesofdigital.com/tools/google-review-link-generator/
   or
   https://arrivala.com/google-review-link-generator

2. Step 2. Enter company name and address, search up your company on the bar.
   For example: ABC Kicten, East 18th, New York, USA

3. Step 3. Copy the link

PROGRAMMING IN NFC TOOLS APP

1. Step 1: Download the “NFC TOOLS” app (Free)

   • Click HERE to download for Apple
   • Click HERE to download for Android

2. Step 2: Click “Write”

3. Step 3: Click “Add Record”

4. Step 4: Click “Add URL/URI” PROGRAMMING IN “NFC TOOLS” APP

5. Step 5: Paste copied “URL” and click “OK

6. Step 6: Click “Write/76 Bytes””

7. last Step 7: Tap/Scan “taggerlink”

   • Click “Write/XXX Bytes” and use the phone Tap / Scan to Taggerlink products

Once scanned you have completed the Taggerlink setup
*See the next page for Programming Multiple Taggerlink

PROGRAMMING MULTIPLE CARDS
*Multiple cards: repeat the scanning process on each card, click “write” again and scan each Taggerlink until finished

UPLOADING DIFFERENT LINKS TO DIFFERENT CARDS

• You’ll need to replace the existing link with a new one.
• Simply delete the old link and paste the new one.
• Then, click ‘write’ to program the next card.

Troubleshooting

It’s showing ‘Write Error”

If given this error try the following solutions

1. Try re-scan and re-attempt to scan as necessary, Keep the closest distance to tap/scan
2.  Check “Byte” Size – If your specific link size “Byte” size is over 1,000 bytes your link will not upload. Try to make the link size smaller.
   Note: To see your Byte size it is written beside the “write/XXX Byte”

If showing ‘That’s an error” on Google page

If showing ‘That’s an error” on Google page

• Incorrect URL: Double-check the URL you entered to make sure it’s spelled correctly and formatted properly.
• Make sure there is ‘No Space’ at the end when you are programming the URL/link.”

Programmed but Not Responding

1. Cause 1: This issue is typically caused by an uploaded link containing business information, duplicate HTTPS, or an invalid link.
   Please double-check the link and remove any business information.

2. Cause 2: User error – customers may mistakenly return to the menu. After pasting the link, click ‘OK,’ then click ‘Write’ and scan.

Working with iPhone but Not with Android:

1. Cause NFC not turned on.
2. Cause 2: Phone uses a metal or thick phone case.
3. Cause 3: Scanning issues.

Can’t Download the App; It’s Saying Not Supported:
Cause: Device is not NFC supported (such as Ipad, smart watch…etc)

Try another device that is NFC-supported

Slow Response When Scanning:

1. Cause 1: Your device or Taggerink may be too close to, surrounded by metal, or covered by something thick.

Once you’ve programmed it, you can start collecting reviews with Taggerlink every day, making your business easier!

• If it’s not working or some issue, please contact us through this CONTACT US FORM
• Provide us detail so we can review your specific issue further.

References

• Taggerlink
• Free Google Review Link Generator - Create Your Google Business Review URL
• Google Preview Link Generator | Digital Marketing Tool | HOD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>