Xbro XC100 Indoor Cam User Manual
- June 6, 2024
- Xbro
Table of Contents
Xbro XC100 Indoor Cam User Manual
In the Box
-
Xbro Cam
-
Power Adapter
-
Power Cable
-
3M Sticker
Look Closer
Warranty
- 30-day return policy&2-year limited warranty.
- Timely customer service via support@xbro.co
- Lifetime professional tech support provided by Xbro.
OSAIO App
Please search “OSAIO” on App Store / Google Play, or scanning the QR code to download the App.
iOS
/ Android
How to Set Up
- Download the OSAIO App and create an account.
- Connect the camera to a power outlet and wait for 15 seconds until the red status light flashes.
- Connect your phone to the 2.4GHz Wi-Fi.
- Log in OSAIO App and click “+” to add your camera.
- Follow the instruction on the App to finish the connection.
Note: If the connection fails, please press and hold the reset button until you hear the prompt, and then reconnect.
Light Indications
Solid red light| | The device is powered on and initializing|
---|---|---|---
Flashing red light| The device is ready to connect
Flashing white light| Connection is in progress
Flashing between white and red light| Wi-Fi account or password is wrong,
please reconnect
Solid white light| The device is working properly
IC Warining
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
RF Exposure
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Customer Service
Find a way to share?
@Xbro @Xbro @Xbro
If you need help
Email: support@xbro.co