VOLLRATH 39947 Cafeteria Breath Guard Instruction Manual

June 1, 2024
VOLLRATH

VOLLRATH 39947 Cafeteria Breath Guard

VOLLRATH-39947-Cafeteria-Breath-Guard-product

Specifications

  • Product Name: Cafeteria Breath Guard
  • Model: One Piece and Three Piece options available
  • Manufacturer: Vollrath Company, L.L.C.
  • Item No.: 2350030-01 Rev 04/12

Product Usage Instructions

One Piece Breath Guard Installation

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.

Three Piece Breath Guard Installation

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

FAQ

  • Q: What should I do if I accidentally over tighten the cap nuts?
    A: If you accidentally over tighten the cap nuts, stop immediately to prevent cracking of the plastic. Loosen the cap nuts slightly to relieve pressure and then re-tighten them to a firm but not excessive level.

  • Q: Can the breath guard be easily removed for cleaning?
    A: Yes, the breath guard components are designed for easy removal and cleaning. Simply follow the installation steps in reverse to detach the breath guard for cleaning purposes.

Installation Instructions

One Piece cafeteria Breath Guard three Piece cafeteria Breath Guard

These instructions cover the installation of the one pice Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.

One Piece Breath Guard installatiOn

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights. VOLLRATH-39947-Cafeteria-Breath-Guard- \(1\)
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Three Piece Breath Guard installatiOn
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.VOLLRATH-39947-Cafeteria-Breath-Guard- \(2\)
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
  4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

www.vollrathco.com

The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.628.0830
Service Tel: 800.628.0832
FAX: 800.752.5620

Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals