safecourt MF400 Digital Frother Removable Jug User Manual
- June 1, 2024
- SafeCourt
Table of Contents
Induction milk frother
MF400
USER MANUAL
MF400 Digital Frother Removable Jug
For your safety and continued enjoyment of this product, please always read the instruction book carefully before using.
Important Safeguards
Please read this Manual carefully before using this Milk Frother, and keep it properly for future reference. This product can be used only by those who are familiar with the following instructions.
- Please read all the instructions.
- Do not immerse this Milk Frother in water or any other liquid, and do not rinse it under the faucet; otherwise, it may be in danger of electric shock.
- Do not operate this Milk Frother if it is damaged.
- Do not touch any charged part of this Milk Frother.
- It is only allowed to use the professionally installed power socket to operate this Milk Frother with a correct voltage.
- Do not use an extended power cord.
- It is forbidden to make the main cable loosely hang down, or use any wet hand to touch or move the plug, or place the plug on any heating surface, or make it contact any oily liquid.
- It is necessary to unplug this Milk Frother after using it every time or before using or replacing its accessories or cleaning it.
- When this Milk Frother is in use, please do not touch its metal part and shell to avoid scalding.
- Do not use any damaged cable or plug for operating this Milk Frother. If its power cord is damaged, it is a must to entrust the manufacturer or its service agency or a similar professional for replacement in order to prevent any danger.
- Any operator of this Milk Frother needs to be responsible for his or her own safety; therefore, only the supervised or trained people can operate this Milk Frother; the following people (including children) are forbidden to operate it: those who are disabled, suffer poor perception, mentally unsound or lack professional technical expertise.
- Do not let children play with the whisk.
- Do not operate this Milk Frother outdoors.
- Do not let this Milk Frother work without milk.
- This is an auxiliary electrical appliance.
- When not using it, please turn off its power supply and main power supply.
- Be sure not to touch the rotating parts, which may cause injury.
- The liquid level shall not exceed the maximum volume mark on the inner wall of cup; otherwise, the liquid will overflow.
- This Milk Frother can be used only with the supplied base.
- Be sure not to operate this Milk Frother on any uneven surface.
- Only fire blankets can be used to extinguish fires on electrical appliances.
- This Milk Frother is most appropriate for household use and it is not recommended for commercial and industrial purposes.
- Do not insert any object or finger into the ventilation hole on the back of this Milk Frother.
- It is prohibited to cover or block the ventilation hole on the back of the plastic base.
- If you intend to obsolete this Milk Frother, it is forbidden to discard it at will; please first disconnect its power supply and then send it to the officially designated garbage dump.
- The surface of milk cup may be hot during and after operations; therefore, it is necessary to use the handle during the use (be sure not to touch any other position in order to avoid scalding).
- In order to prevent any fire, electric shock or personal injury, please do not immerse the power cord and plug of this Milk Frother in water or any other liquid.
- When using this Milk Frother nearby a child or children, it is a must to closely supervise its use.
- Be sure to unplug the plug from the wall socket when not using this Milk Frother or before cleaning this Milk Frother; please cool the parts of this Milk Frother before installing or removing them.
- Do not operate this Milk Frother when its power cord or plug is damaged; do not operate this Milk Frother after it goes wrong or is damaged, and it is necessary to send it to the nearest authorized service facility for inspection and repair.
- The use of any accessory not recommended by the electrical appliance manufacture may cause fire, electric shock or personal injury.
- Do not hang the power cord on the edge of table or counter, or make it contact any hot place.
- Do not place it nearby a position with hot air or an electric stove or in a heating oven.
- If you want to disconnect the power supply, please turn the “ON/OFF” key to the “OFF” position and then unplug the plug from the wall socket.
- Do not use the equipment for other purposes.
- If you remove the cup cover when this Milk Frother is working, you may be scalded.
- Be sure not to pull the power cord when unplugging its plug from the wall socket; please always hold the plug.
- When this Milk Frother is working, it is prohibited to place any paper or other object between the groove of the plastic base and the metal cup; otherwise, this machine will be damaged.
- In case of any damage caused by improper use or failure to comply with these instructions, we will not undertake any responsibility.
Preparations for use
It is necessary to carefully open its packaging box, keep all the packaging
materials inside it, take the Milk Foam Machine out and then carefully read
its manual to check whether or not its parts are complete; after that, it is
necessary to power on the Milk Foam Machine to check whether it can work
normally.
Before using the Milk Foam Machine for the first time, it is necessary to clean
its parts and then get rid of the dust or objects left during its production.
Parts Identification
- Transparent cup cover
- Scales on the cup body
- Stainless-steel cup body
- Display screen
- Frothing and stirrer whisk
- Silicone sealing ring of cup cover
- Plastic handle
- Plastic base
- 8 ON/OFF button
Preparations for use
1. Correctly install the whisk onto the bulging shaft in the cup body.
2. Pour the milk into the cup of this Milk Frother and put on the cup cover.
We recommend the use of frozen milk at the temperature of about 5-10°C
(41-50°F); the milk with different fat content will produce different milk
froth effects; we recommend the use of whole milk to make milk froth (fat
content > 3.0%), which will be denser and last longer. Note that the milk
volume should not exceed the mark (see the maximum volume in the figure below
as a reference); if the metal cup has been cleaned, please use a dry towel to
wipe the water trace at the bottom of the metal cup and then put it into the
groove of the base; there should be no water or foreign matter left in the
groove of the base.
3. Connect this Milk Frother to the power supply; after this Milk Frother is
powered on, its buzzer will ring once (0.2S), the machine will enter the
standby status if there is no operation within 1 seconds; at the moment,
please press the button for function selection with specific operations as
shown in the following table.
Product Function| Operating Method| Matters Needing Attention
1. HOT FROTH MILK| Pour 200ml milk in the cup, Press once when turned on
Start working after the light flashes twice the motor will stop after turning
for (100-250) seconds; at the moment, its buzzer will make a sound (for 1
second), meaning the completion of work; the milk-froth ratio is at least 70%
and the milk temperature falls in between 60°C and 70°C (140-158°F).| The
maximum milk volume is 200ml.
2. HOT MILK| Pour 400ml milk in the cup, Press once when turned on Start
working after the light flashes twice the motor will stop aftermin or so 0)
secondid The maximum milk (for 1 second), meaning the completion of work; the
milk temperature falls in between 60°C and 70°C (140-158°F).| The maximum milk
volume is 400ml.
3. CHOCOLATE MILK| Pour 400ml milk and 30g chocolate beans in the cup, Press
three times when turned on Start working after the light flashes twice, the
motor will stop after turning for (300-450) seconds; at the moment, its buzzer
will make a sound (for 1 second), meaning the completion of work; the milk
temperature falls in between 70°C and 80°C (158-176°F).| The maximum milk
volume is 400ml.
4. COLD FROTH MILK| Pour 200ml milk in the cup, Press four times when turned
on Start working after the light flashes twice the motor will stop after
turning for (12015) seconds; at the moment, its buzzer will make a sound (for
1 second), meaning the completion of work; the milk- foam ratio is at least
70%.| The maximum milk volume is 200ml.
Notes:
1. Ween you effectively touch every key once, the buzzer will make a sound
(for 0.2 seconds).
2. When this machine works in any mode with the heating function with a
minimum capacity of 120ml(MIN) pure milk, both the milk temperature values and
the corresponding time values will be not within the above ranges; in such
cases, the milk temperature values and the corresponding time values are not
judged.
Fault Alarm Handling:
| Fault Code | Possible Cause(s) | Solution(s): |
|---|---|---|
| E1 | 1. The whisk is not installed in the metal cup. |
2. The metal cup is not put into the base.
3. The metal cup is not added with corresponding solution,
meaning that this product is heated with nothing; the
solution in the metal cup is insufficient.
4. Take out the metal cup when the milk frother is working.| 1. Please mount
the whisk correctly onto the shaft of metal cup.
2. Please put the metal cup correctly into the base.
3. Please pour an appropriate amount of corresponding solution into the metal
cup and it
is not allowed to start the machine without corresponding solution; it is
necessary to add
more than 120ml ( MIN) corresponding solution and it is recommended to make
the mixture as
per the operating instructions..
4. Please put the metal cup in again and start it again and it is not allowed
to take the metal cup out when the milk frother is working.
E2| The voltage is excessively low.| Please apply correct voltage as per the
operating manual.
E3| The voltage is excessively high.| Please apply correct voltage as per the
operating manual.
E4| 1. The machine is continuously heated for a long time and
thus the inside of the base is at high temperature.
2. The cooling hole on the back of the base is blocked and
thus the inside of the base is at high temperature.| 1. Pease aoid heating
the machine continously for more than 5 times; please operate the machine
after it cools.
2. Remove the obstacles from the cooling hole on the back of the base and
then operate the
machine after it cools
E5-E7| This product goes wrong.| Please contact the customer service
personnel.
The user is required to read the instructions carefully and avoid any wrong
operation as much as possible; if the above solutions fail to solve the
problems), be sure not to disassemble the product by yourself and please
contact professional staff to solve the problems).
Tips for Use
The following tips for use can help you make better milk froth:
- Use a foaming whisk to first heat the milk and then make it into milk foam. When this Milk Frother is working, you need to immediately prepare coffee or hot chocolate.
- This Milk Frother can make frozen milk into milk froth; however, it does not mean that this machine can make frozen milk into frozen milk froth because the working Milk Frother can generate certain heat.
- The ideal milk heating temperature is 60-80°C because such temperature can increase the flavor of coffee while not reducing the taste of coffee and you will not wait too long to drink coffee.
- The whisk is relatively small, so it is necessary to place it in a safe place in order to prevent it from being lost or prevent a child from eating it by mistake.
- This Milk Frother can be used only for heating or frothing; please do not put coffee beans into this Milk Frother; please clean and dry it immediately after using it.
- It is optimal to use whole milk for making milk foam (fat content > 3.0%) and the cooled milk at the temperature of 5-10 °C can take on the best effect. Using the whisk wrongly or pouring excessive whole milk may cause milk overflow.
Cleaning and Maintenance
Before cleaning this machine, please separate the cup body from the base of
the power supply base, take out the cover of the cup body, and do not immerse
the power -supply base in water.
- For the cup body: Clean it with cold water and an appropriate amount of mild detergent as well as a soft towel not losing hair to gently clean it and then wipe it dry with a dry towel; it is allowed to put it in a dishwashing machine for cleaning.
- For the cup cover: Take the cup cover away from the cup body, and then directly clean it with water; it is not allowed to put it in a dishwashing machine.
- For the plastic base: Use a soft and wet towel to gently wipe the base part. It is not alone a neally stone detering or and hard sainause such o mays nylon the surface of base. It is not allowed to put it in a dishwashing machine.
- For the whisk: Take it out of the cup body, clean it with water, wipe it dry and place it in a safe place; it is not allowed to put it in a dishwashing machine.
Technical Parameters:
Voltage and power: 220-240V~ 50/60Hz 550W
Discard and Recycling:
It is necessary to destroy the package of this product as per the local
regulations on waste disposal. It is necessary to classify paperboards and
paper as recyclable paper, and classify platinum as recyclable resource
(potentially recyclable resource). After this product is discarded, it is not
allowed to directly dispose it as household waste and it is a must to send it
to the recycle station for recycling electronic products specially. The marks
of this product in the user’s manual and on the package have shown that it is
not allowed to throw this product into any garbage can (see the symbol “x” on
the garbage can, as shown in the above picture).
For the problem of how to dispose an old and useless milk frother, you are
required to consult your local recycle station (old equipment recycle station
designated by your municipal government); if the label reminds that all the
materials are reusable, you will make contributions to environmental
protection as long as you use the reused old equipment made from recycled
materials or otherwise.
Thank you for purchasing the
Inductie-melkopschuimer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>