SafeCourt FP100 Food Processor User Manual

SafeCourt FP100 Food Processor

IMPORTANT SAFEGUARDS

When using this or any other electrical appliance, always follow these basic safety precautions:

1.  Read All Instructions Before Using This blender
2.  To protect against risk of electrical shock do not put cord, plug, or base in water or other liquid.
3.  Close supervision is necessary when any appliance is used by or near children.
4.  Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. Avoid contacting moving parts. Moving parts.Keep fingers out of discharge opening.
5.  Do not operate any appliance with a damaged cord or plug. or after the appliance malfunctions, or is dropped or damaged in any manner. Call our toll-free customer ervice number for information on examination, electrical repair, mechanical repair, or adjustment.
6.  This appliance has important markings on the plug blade. The attachment plug or entire cord is not suitable for replacement. If damaged, the appliance shall be replaced.
7.  The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons
8.  Do not blend hot liquids
9.  Do not use outdoors.
10.  Do not let cord hang over edge of table or counter or touch hot surface including stove.
11.  Keep hands and utensils away from moving blades while processing food to reduce the risk of severe injury to persons or damage to the food chopper A scraper may be used but must be used only when the food chopper is not running.
12.  Blades are sharp. Handle carefully.
13.  This appliance is intended for processing small quantities of food for immediate consumption. This appliance is not intended to prepare large quantities of food at one time.
14.  To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place.
15.  Be certain cover is securely locked in place before operating appliance.
16.  Do not attempt to defeat the cover interlock mechanism.
17.  Never place blade assembly on base unless assembled to jar.
18.  Never feed food by hand.Always use food pusher.
19.  Check hopper for presence of foreign objects before using.
20.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
21.  Children should be supervised to ensure that they do not play with the appliance.
22.  If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard..

Before first use

• Remove any packaging material or promotional labels before first use.
• Wash the chopper cover and jar in warm, soapy water. Dry thoroughly.
• Care should be taken when cleaning the blades, blades are sharp.

Parts

1.  Pusher
2.  Cover
3.  Slicing/fine shredding/thick shredding blade
4.  Blade holder
5.  Egg whipper
6.  S blade
7.  Dough blade
8.  Drive shaft
9.  Bowl
10.  base
11.  Knob
12. . Lid Cap
13. . Jar lid
14.  Jar
15.  Blade assembly

Knob

Pulse — turn the knob by anticlockwise to“PULSE” and held for unit to operate. When released, unit will stop. Use PULSE for short processing tasks, such as chopping nuts, raw meats, or vegetables. This lets you check processed results and control the tininess.

1. turn the knob deasil to “1”, the machine run at 1 speed continuously. 2 — turn the knob deasil to “2”, the machine run at 2 speed continuously. 3 — turn the knob deasil to “3”, the machine run at 3 speed continuously.
   Choosing a speed for all functions** Tool/ Attachment| Function| Speed| Maximum capacities| Operation time**
   ---|---|---|---|---
   S Blade| Grind meat Nuts vegetable| 3| 500g meat 200g Nuts| 15s 15s
   | | | 500g vegetable| 10s
   | | | raisin 550g +honey 450g| 30s
   Dough Blade| Dough making| 3| 400g flour+240gwater| 1 min
   Slicing/| Slicing/| 2-3| 500g vegetable such| Until a
   shreding/| shredding food| | as as carrots cheese| batch is
   granulating| and vegetables| | | shredded
   blade| such as as| | |
   | carrots, cheese| | |
   Egg whipper| Beating egg white| 3| 2-5 pcs eggs white| N/A
   Jug and blade assembly| Blender| 2-3| 1500ml| N/A

To use our the accessories

S Blade / Egg whipper / Dough blade /Spiralizer Blader /Slicer/shredder blade-A/ Slicer/shredder blade-B

1.  Place the unit base on a dry level surface.
2.  Attach the bowl and snap the Bowl handle and rotate it clockwise until it is fully locked on the Base.
3.  Put down the Drive Shaft until it is correctly placed on the bowl.
4.  Insert S Blade / Egg whipper / Dough blade /Spiralizer Blader /Slicer/shredder blade-A/ Slicer/shredder blade-B into the drive shaft and release.
5.  Add ingredients into pieces small enough to fit into the Bowl
6.  Attach lid with pusher and rotate it clockwise until it is fully locked into the bowl.
7.  Rotate the knob clockwise until it is on the “1”/“2”/“3” for continuous processing, put down the food pusher with about 1lb force.
8.  After processing food, rotate the knob anticlockwise until it is on the “0”, allow the blade stop rotating, twist the Cover towards unlock to remove the cover. Always switch off before removing the lid.

Note: There is only one position for the Bowl to be locked onto the Base. The unit won’t operate if the Bowl is not correctly placed onto the Base. When cover is UNLOCK, the safety mechanism on the cover and Bowl will be in different position. The unit won’t operate.
Important : Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar to caster sugar.

To use your blender

1.  Place the unit base on a dry level surface.
2.  Attaching the Blade Assembly onto the top of the Jar . Securely tighten by turning clockwise.
3.  Attach the jar and snap the jar handle and rotate it clockwise until it is fully locked
4.  On the Base.
5.  Put your ingredients into the Jar.
6.  Put the Lid cap in the lid, then turn.
7.  Turn the lid in to lock onto the Jar.
8.  Plug the product into AC electrical outlet.
9.  Select a speed to operate product.
   Allow all llquids to cool to room temperature before placing them in the liquidiser.

Blending Tips and Techniques

•  Blender may be damaged. Do not process deep-frozen ingredients (except
•  ice cubes). Do not operate when empty.
•  Cut food into small pieces, about 2 in. (5 cm) before adding to the blender. To chop, grate or prepare fruit smoothies using fresh or frozen fruit, cut foods into 3/4 in. (2cm) pieces.
•  For best circulation of foods that are to be blended with some liquid, pour the liquid into the jar first, then add solids.
•  Some of the tasks that can not be performed efficiently with a blender are: beating egg whites, whipping cream, mashing potatoes, grinding meats, mixing dough, and extracting juices from fruits and vegetables.
•  The following items should never be placed in the unit as they may cause damage: bones, large pieces of solid frozen foods, or tough foods such as turnips.
•  To crush ice, fill blender jar half-full with cold water. Add about 2 cups of ice cubes. Hold one hand firmly on the lid: pulse the ice crush button. If more ice is needed, remove the cap and add cubes one by one through the hole in the lid. DO NOT CRUSH ICE WITHOUT LIQUID. Failure to follow these directions can result in damage to the blades, jar, bender, and possibly result in personal injury.

Care & Cleaning

Discs are permanently sharpened at the factory and will be ruined by attempted sharpening.

Cleaning

1.  Before cleaning, be sure the unit is switched off and the cord is unplugged.
2.  Whenever possible, rinse parts immediately after processing for easy cleanup.
3.  Wipe the Base, Control knob, and feet with a damp cloth and dry thoroughly. Stubborn spots can be removed by rubbing with a damp cloth and a mild, non-abrasive cleaner. Do not immerse the Base in liquid.
4.  All removable parts can be washed by hand or in a dishwasher, top rack. If washing by hand, wash in hot, sudsy water, rinse, and dry thoroughly. If necessary, use a small nylon bristle brush to thoroughly clean the Bowl and Food Chute/Cover, this type of brush will also help prevent cutting yourself on the Chopping Blade , Slice/Shred Disc and blender Blade.
5.  If washing in a dishwasher, place removable parts on the top rack only-not in or near the utensil basket.
6.  Do not use rough scouring pads or cleansers on any plastic or metal parts.
7.  Do not fill the Bowl with boiling water or place any of the parts in boiling water. Some foods, such as carrots, may temporarily stain the Bowl. To remove stains, make a paste of 1 tablespoon baking soda and two tablespoons warm water. Apply the paste to the stains and rub with a cloth. Rinse in sudsy water and dry.

Base

1.  Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.

Blender

1.  Empty the jug/jar before unscrewing it from the blade unit.
2.  Wash the jug/jar by hand.
3.  Remove and wash the seals.
4.  Don’t touch the sharp blades, brush them clean using hot soapy water, then rinse thoroughly under the tap.
5.  Don’t immerse the blade unit in water. Leave to dry upside down.

Environment

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>