ADMIRAL STAGING RIHASH04 Shark Tent Clamp User Manual

ADMIRAL STAGING RIHASH04 Shark Tent Clamp

Specifications

• Manufacturer: Rolight Theatertechniek B.V.
• SKU: RIHASH04
• Intended Use: Hang loads from keder-type tent beams
• Load Capacity: Maximum 200kg
• Safety Factor: 8:1
• Compliance: Meets German regulations for loads above persons DGUV17/18 (formerly known as BGVc1)

Product Usage Instructions

Safety Instructions

It is crucial to read and understand the safety instructions provided in the user manual before assembly, setup, and servicing of the SHARK clamp. Ensure all users are familiar with the safety guidelines.

Scope

The SHARK clamp is designed for temporary hanging points for loads up to 200kg above people from appropriate keder profiles within the entertainment industry. Use appropriate Personal Protective Equipment (PPE) during installation.

Assembly Instructions

1. Inspect the clamp for any damages before use.
2. Attach the clamp securely to the keder-type tent beams following the manufacturer’s guidelines.
3. Ensure the load does not exceed 200kg.
4. Regularly check the assembly for any signs of wear or damage.

Disassembly Instructions

• When disassembling, carefully remove the clamp from the keder profiles and store it in a safe place.
• Inspect for any damages or wear that may have occurred during use.

Maintenance

• Regular maintenance is essential to ensure the clamp’s proper functioning.
• Clean the clamp regularly and inspect for any signs of wear or damage. Replace any worn components promptly.

Storage

• Store the SHARK clamp in a dry and secure location when not in use.
• Avoid exposure to extreme temperatures or moisture that could damage the clamp.

FAQ

Q: What is the maximum load capacity of the SHARK clamp?

A: The SHARK clamp can support loads up to a maximum of 200kg.

Q: How long can the SHARK clamp be used for temporary installations?

A: Temporary use is generally defined as a period no longer than 90 days.

INTRODUCTION

• The ADMIRAL SHARK clamp is intended to hang loads from keder-type tent beams.
• In this manual ELL stands for Entertainment Load Limit. This means the device has an inherent double safety factor (8:1) and is therefore suitable to support loads above persons.
• The SHARK is also designed to meet the German regulation for loads above persons DGUV17/18 (formerly known as BGVc1).
• ADMIRAL has endeavored to deliver the highest degree of accuracy possible. However continuous improvement of our products is an ADMIRAL policy. Therefore product specifications are subject to change without notice.
• Readers and users are encouraged to notify ADMIRAL of errors and send in suggestions for improvements. All communications will be carefully considered for future printings of this manual and changes to our products.

SAFETY INSTRUCTIONS

• This user manual must be read and understood before assembly, setup, and servicing.
• All people using and servicing the SHARK must familiarise themselves with the safety instructions and user guidelines written in this manual.
• This manual needs to be accessible to all users at all times.

LEGEND

• DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• This signal word is to be limited to the most extreme situations.
• WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Addresses practices not related to personal injury.
• SAFETY INSTRUCTIONS: This is used for lists of steps, procedures, or instructions that might otherwise substitute a DANGER, WARNING, or CAUTION notification.
• Note that equivalent phrases, such as SAFE OPERATION PROCEDURES or SAFE SHUT DOWN PROCEDURE, can be used in place of the words “SAFETY INSTRUCTION”.

CAUTION

• DO NOT lift or load above people without the following precautions:
• A SHARK must be taken out of services immediately if, during use, repair, or maintenance damages are discovered.
• Remove people from the area during installation.
• Use solely instructed and/or trained personel.
• Wear appropriate Personal Protective Equipment (PPE) such as hard hats and gloves during installation.
• Make sure there is an adequate amount of working light during the installation of the product.

SCOPE

• The intended use of the SHARK is to create a temporary hanging point for loads of a maximum of 200kg installed above people from appropriate keder profiles within the entertainment industry.
• Temporary is in general a period no longer than 90 days.
• Loads can be trusses, sound systems, set pieces, or hoists.
• Any other way of use is considered to be a case of misuse. Solely the user is liable for any damage or injury resulting from such cases.
• WARNING Check local legislation for the application of use.

LIMITATIONS OF USE

• Exceeding the limitations of use can severely endanger the audience and users.
• The dynamic factor of lifting must be considered separately.
• The SHARK can be used on keder beams with a width between 40 mm and 125 mm.
• The SHARK can be operated from -20° up to 60°Celsius.
• Do not exceed the maximum ELL (entertainment load limit) stated on the product.
• Make sure the resulting forces on the supporting structure are approved by a competent person before applying the load.
• To determine the maximum suspended load on the product, all imposed loads shall be considered. e.g. the dynamic factor caused by the lifting machinery.
• Sound systems can be suspended but users must check regularly the integrity of the clamp as severe vibrations could loosen bolts/knobs.
• The SHARK must be inspected by a competent person as often as required but with a minimum of 1 x per year.
• Records of these inspections must be kept.
• Inspect equipment before every use. A damaged SHARK shall be taken out of service.
• Outdoor use shall be approved by a competent person and might influence the load capacity.
• Do not expose the product to full rain or snow.
• Outdoor use is the sole responsibility of the operator.
• In case of use in the vicinity of salt water, the product shall be rinsed regularly with fresh water to avoid corrosion.
• It is also imperative to observe the local accident prevention regulations and/ or occupational health and safety regulations.
• The support structure, on which the SHARK is used, must have lightning protection when used outdoors.
• The support structure, on which the SHARK is used, might need to have electric potential bonding.
• Do not use the SHARK to guide currents for electric potential bonding.
• Make sure the SHARK clamp and the supporting structure are dry and free of dirt.
• Use appropriate packaging to transport the Products. e.g. a flight.
• Solely use by ADMIRAL-approved parts to replace damaged or lost parts.
• Do not re-zinc steel components as they might be subject to hydrogene embrittlement.
• Do not apply lateral loading (fig 01) but medial (fig 02).
• WARNING The allowable load from the SHARK strongly depends on the types of keder beams used for the supporting structure.
• A load that is too heavy can cause the structure to fail.
• CAUTION Do not throw the SHARK, as it might damage the product.
• Do not suspend the SHARK as shown below (fig 01). It creates torsional forces and influences the stability of the supporting structure.
• Installation is permitted only on a load-bearing keder type beam and with an inclination of max 18dgr as per fig: 01.
• If necessary, the load capacity of the keder beam is to be acquired from the manufacturer and/or operator.

1. Keder tent profile
2. SHARK keder clamp

TECHNICAL DATA & LOAD CHART

Front view

Technical data

• Article code: RIHASH04
• EAN: 8720094427812
• ELL: 200 kg (2000 N)
• Safety factor against failure: 8:1
• Static test coefficient: 1,5: 1
• Material: aluminum anodized
• Dimensions: 160 x 40 x 120 mm (L x W x H)
• Weight: 2.3 kg
• Colour: black

Applicable Directives, Regulations, Standards and Information Papers

• The following directive is applicable 2006/42/EC Machinery directive
• The following regulation is used
• DGUV regulation 17 Regulations for stages and studios (Formerly known as BGVc1)
• Parts of the following standards and information papers are used by DGUV Information Safety at productions and events for television, radio, film, theatre,
• 215-313 exhibitions: Loads above persons (Formerly known as BGI 810-3)
• EN 17206:2020 Lifting and load-bearing equipment for stages and other production areas within the entertainment industry
• BS 7905-1:2001 Lifting equipment for performance broadcast and similar applications. Part 1 specifications for the design and manufacture of above stage equipment

IDENTIFICATION

SHARK

1. Beamsize 125 mm
2. Beamsize 100 mm
3. Beamsize 75 mm
4. Beamsize 50 mm
5. 2 securing screws
6. Push blade
7. Lifting eye mounting plate
8. Rotable eyebolt

EXPLANATION OF THE ENGRAVING

SHARK engraving

1. This indicator indicates where to align the SHARK to fit a 50, 75, 100, or 125mm beam/ profile and which Working Load Limit is applicable
2. Brand and product name
3. CE Marking
4. Entertainment
5. Load Limit
6. EAN code
7. Batch number*
8. Icon Design registered

Based on the Batch number ADMIRAL is able to trace the date of manufacturing

ASSEMBLY INSTRUCTIONS

• WARNING Inspect the SHARK before use. Make sure all components are in place and good order. If damaged, mark the item clearly and take it out of service*.
• Make sure the SHARK and the cedar beam are dry and free from dirt.
• See Chapter 11 for further instructions!

1. Step 1
   • Choose which width the SHARK needs to be. Open the clamping jaws in the desired width by pushing) the bottom of the SHARK.
2. Step 2
   • Position both of the SHARK’s clamping jaws in the profile’s groove or on the beam’s supporting surface.

WARNING

DISASSEMBLY INSTRUCTIONS

• Step 3 Push the jaws of the SHARK against the beam and manually tighten the two screws to secure the SHARK. Tools shall not be used. Tighten the two screws , item 5 chapter 7, hand tight (15Nm).
• Step 4 Once installed, check if the SHARK is appropriately mounted by pulling it from the lifting eye from left to right and from front to back.
• Tighten the two screws again. If the SHARK moves, re-install and check the cause.
• WARNING Check the integrity of the shark after severe vibrations caused by sound systems or if the supporting structure was subject to severe vertical movement e.g. due to winds.

1. Step 1 Turn the two screws in a left direction to loosen the clamp.
2. Step 2 Press the push blades inwards to open the shark.
3. Step 3 Slide the SHARK down from the beam.

STORAGE

• The SHARK must be stored in a dry, non-aggressive environment.
• Make sure the parts cannot bend.
• Avoid vibrations. Rubbing parts can cause excessive wear and tear

MAINTENANCE & REJECTION CRITERIA

SAFETY INSTRUCTIONS

• The SHARK hardly needs any maintenance under normal use and environmental circumstances.
• For safety reasons, however, all parts must be checked regularly for dirt, damage, loss, and corrosion.
• The SHARK shall be checked in compliance with the local law by a competent person.
• Checking shall take place as often as required but with a minimum of 1x per year. In case of doubt contact ADMIRAL Staging.
• WARNING If damaged, mark the item clearly and take it out of service.
• Missing or damaged eyebolts should be replaced by genuine ADMIRAL eyebolts only. Tighten the eyebolts with a torque wrench set at 15 NM.
• Check all components for damages like cracks, deformations, scratches, and corrosion. Damaged and corroded parts shall be rejected and thrown away.
• In general, scratches > 10% of the wall thickness mean the products need to be rejected from use.
• In general, deformations > 10% of a straight line from the outer surface mean the products need to be rejected from use.
• Remove all sharp and rough feeling edges and surfaces by using sandpaper or a file.
• Check roll pins and welds for cracks. If cracked, replace.

WARRANTY

• For 24 months, we will repair, free of charge, any damage attributable to faulty materials or workmanship under the condition that the equipment is forwarded, freight paid, to our warehouse or one of the ADMIRAL Staging distributor’s houses.
• The warranty period begins on the day of the delivery, proven by a purchase receipt like an invoice or delivery note or their copies.
• The warranty does not cover damage due to transport, negligent handling, or overloading of the equipment or parts subject to normal wear and tear signs.
• Nor damages that originate from a case of misuse because of nonobservance of the safety regulations in this instruction manual.
• The warranty will be invalid when other parts than the original ADMIRAL Staging parts have been used or modifications of our design have been made by third parties.
• Warranty repairs do not renew nor extend the warranty period.
• In case of a claim that falls under the warranty, e. g. a malfunction or spare part requirements please contact your point of sale or ADMIRAL Staging.
• The manufacturer is not liable for indirect consequential damage and financial loss.
• The manufacturer shall not be liable for any changes made to the SHARK parts nor for any damage resulting from such changes.

EC DECLARATION OF CONFORMITY

EC-DECLARATION OF CONFORMITY FOR MACHINERY (2006/42/EG Annex II)

• Rolight Theatertechniek
• Josink Kolkweg 10
• 7545 PR Enschede
•  The Netherlands
• Herewith declares that: ADMIRAL “SHARK Tent clamp”; Article code RIHASH04
• complies with the Machinery Directive 2006/42/EEC Annex II
• the following harmonized standards have been applied (or parts/clauses of): EN 12100-1-2010
• the following technical regulations, standards, and information papers have been used (parts/clauses of): German DGUV 17-18, German DGUV 215-313, EN 10204:2004, EN 17206 :2020, BS 7905-1 :2001
• All Shark Clamps are tested with a static test coefficient of 150 % of the workload Enschede, The Netherlands 15-September-2022
• Ms. E. Dijk Owner Rolight Theatertechniek b.v.
• www.admiralstaging.com
• Josink Kolkweg 10
• 7545 PR Enschede
• The Netherlands
• Tel: +31 53 4 301 201

Manufacturer:

• Rolight Theatertechniek B.V.
• Josink Kolkweg 10
• 7545 PR Enschede , The Netherlands
• Phone (+31)53 432 06 44
• info@rolight.nl
• www.rolight.nl
• Distributed by ADMIRAL

Documents / Resources

| ADMIRAL STAGING RIHASH04 Shark Tent Clamp [pdf] User Manual
RIHASH04, RIHASH04 Shark Tent Clamp, Shark Tent Clamp, Tent Clamp, Clamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>