SEAGATE FireCuda 520 Cyberpunk 2077 User Guide

: June 9, 2024
: Seagate

Table of Contents

Introduction
Parts
Precautions
Recommendations
Before installation
Required tools
Optional RGB LED connection
RGB Color and Pattern Control
Support & Services
Regulatory Compliance
Taiwan RoHS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FireCuda 520 Cyberpunk 2077 User Guide

Introduction

System requirements

M.2 (M key) slot, PCIe® G4 ×4 interface (backwards compatible with PCIe G3 interface)
Windows® 10
For RGB LED functionality: Motherboard with 5V addressable header

Parts

FireCuda 520 SSD with heatsink
Optional 5V addressable RGB connector cable to power and control RGB LED lights

Precautions

Unpack the SSD.
Inspect the SSD for any damages.
For the safety of your SSD, please take the necessary precautions to avoid electrostatic discharge.
Power down and power drain your computer according to the instructions provided in the computer product documentation.
Back up the data from the existing storage device.

CAUTION Electrostatic discharge (ESD) can damage the SSD. Make sure that you install the SSD at an ESD-safe workstation. Ground yourself to protect the device from any static electricity present in your body.

Recommendations

Intended for desktop PCs.
FireCuda 520 SSD’s heatsink is pre-installed and should not be removed as it can damage the SSD.
With the heatsink, the product exceeds standard M.2 dimensions. Dimensions of the FireCuda 520 Cyberpunk 2077 Limited Edition are 80.15mm (L) x 22.9mm (W) x 18.25mm (H). Verify that your system provides enough space for installation.
M.2 connectors H3.2 and above are recommended for an SSD with a heatsink.
For optimal performance, provide sufficient airflow and cooling.

Before installation

IMPORTANT Make certain your computer’s BIOS is up to date before installing FireCuda 520 SSD. See your computer or motherboard documentation for information on how to access the BIOS.

Most motherboards have more than one M.2 slot available for SSD drives. Before installing FireCuda 520 SSD:
Determine the appropriate M.2 slot on your motherboard for FireCuda 520 SSD. If another SSD drive is already installed in the slot, you’ll need to remove it during the installation.
Decide whether you want to install your computer operating system on FireCuda 520 SSD and use it as your primary drive. See your computer or motherboard documentation for details on how to boot from an M.2 SSD.
If you need to transfer files from another drive to FireCuda 520 SSD, consider how you will move your data or clone your drive before starting the installation.

Required tools

Screwdriver and M.2 screws (not included) to fasten FireCuda 520 SSD.

Install FireCuda 520 SSD

Before installing FireCuda 520 SSD, power down your computer and unplug any cables attached to it.
Open the case or cabinet.
If an existing SSD drive is installed in the M.2 PCIe slot you intend to use for FireCuda 520 SSD, you’ll need to remove it.
Power on your computer.
Access the BIOS setup while the computer is booting. Ensure that a PCIe device is set in the BIOS boot sequence or boot priority list.
Power down the computer and locate the M.2 PCIe slot on your motherboard.
Check to make sure that the notch on FireCuda SSD is correctly aligned with the divider in the slot.
Gently push FireCuda SSD into the slot until it’s firmly seated.
Hold down FireCuda SSD while you fasten the mounting screw. Make sure the SSD is secured in place.

Optional RGB LED connection

Attach the 5V addressable RGB cable to the connector under the heatsink.
Connect the other end of the cable to the 5V addressable header on the motherboard. The power pin (marked with a triangle and identified by the red cable) must be connected to the 5V pin 1. Refer to your motherboard documentation for detailed instructions on how to connect RGB capable components to your motherboard. Incorrect connection can damage the RGB connector on the heatsink as well as the computer’s LED function.
Close the case or cabinet and reassemble your computer.
Power on your computer.
Install the computer operating system on FireCuda SSD if you want to use it as the primary drive.

RGB Color and Pattern Control

Refer to the manufacturer of your motherboard for details on the software used to control RGB colors and patterns

Support & Services

SeaTools
SeaTools™ SSD GUI is a free utility that lets you monitor and maintain your drive’s health, status, and tests. Go to www.seagate.com/support/downloads/seatools.

DiscWizard
Seagate DiscWizard is an integrated software suite that lets you back up your operating system, applications, settings, and files, while also securely destroying confidential data you no longer need. Go to www.seagate.com/support/downloads/discwizard.

Firmware download and tools download for secure erase
Go to www.seagate.com/support/downloads.
Internal SSD support
Go to www.seagate.com/support/products.
Online support and services
Go to www.seagate.com/contacts.
Warranty support
Go to www.seagate.com/support/warranty-and- replacements.
Data recovery services
Go to www.seagate.com/services-software/seagate-recovery- services/recover.
Seagate Partner Program
Go to www.seagate.com/partners.

Regulatory Compliance

Product Name	Seagate One Touch
Regulatory Model Numbers	SRD0VN2, SRD0VN3

China RoHS
China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, we determined this product’s Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014.

Part Name	Hazardous Substances
(Pb)	(Hg)
HDD	X
Bridge PCBA	X
Power Supply (if provided)	X
Interface cable (if provided)	X
Other endosure components	0

SJ/T 11364 This table is prepared in accordance with the provisions of SJ/T 11364-2014
0: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T26572.
X: Indicates that the hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T26572.

Taiwan RoHS

Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI’s) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Beginning on January 1, 2018, Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663. This product is Taiwan RoHS compliant. The following table meets the Section 5 “Marking of presence” requirements.

SRDOVN2, SRDOVN3 Product Name: One Touch, Model: SRDOVN2, One Touch, Model: SRDOVN3

Unit| Restricted Substance and its chemical symbol
(Pb)| (Hg)| (Cd)| (Cr.)| (PBB)| (PBDE)
HDD| —| 0| 0| 0| 0| 0
Bridge PCBA| —| 0| 0| 0| 0| 0
Power Supply (if provided)| —| 0| 0| 0| 0| 0
Interface cable (if provided)| —| 0| 0| 0| 0| 0
Other enclosure components| 0| 0| 0| 0| 0| 0
Note 1. “0” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 2. “—” indicates that the restricted substance corresponds to the exemption.