Whirlpool 595 Built In Multi Functional Microwave Oven Instruction Manual
- June 1, 2024
- Whirlpool
Table of Contents
Whirlpool 595 Built-In Multi-Functional Microwave Oven
Product Specifications:
- Model Number: 557
- Temperature Range: 530 – 570 degrees Fahrenheit
- Operating Voltage: 549 min – 560 V
- Capacity : 20 – 423 units
- Weight : 97 – 478 lbs
Dimension
Product Usage Instructions
Safety Instructions:
Before using the appliance, read and observe the following instructions:
- Do not touch the oven during the pyrolytic cycle to avoid burns.
- Keep children and animals away during and after the pyrolytic cycle.
- Remove excess spillage, especially fats and oils, from the oven cavity before starting the pyrolytic cycle.
- Ensure burners or hotplates are switched off if the oven is installed below a hob during the pyrolytic cycle.
- Avoid touching heating elements as they become hot during use.
Permitted Use Caution:
The appliance is designed for household use and similar applications. Do not
operate the appliance with an external switching device or for professional
purposes. Avoid using the appliance outdoors.
Installation:
Installation precautions include handling by at least two persons, using
protective gloves, and ensuring all cabinet-cutting works are completed before
fitting the appliance. Do not remove the appliance from its packaging until
installation. After installation, ensure the bottom of the appliance is not
accessible.
Electrical Warnings:
The rating plate is located on the front edge of the oven. Ensure the
appliance can be disconnected from the power supply. The appliance must be
earthed according to national electrical safety standards.
SAFETY INSTRUCTIONS
IMPORTANT TO BE READ AND OBSERVED
- Before using the appliance, read these safety instructions. Keep them nearby for future reference.
- These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
- Do not touch the oven during the pyrolytic cycle (self-cleaning) – risk of burns. Keep children and animals away during and after the pyrolytic cycle (until the room has been fully ventilated). Excess spillage, especially fats and oils, must be removed from the oven cavity before initiating the pyrolytic cycle. Do not leave any accessory or material within the oven cavity during the pyrolitic cycle.
- If the oven is installed below a hob, make sure that all burners or electric hotplates are switched off during the pyrolytic cycle – risk of burns.
- Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised. Children from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
- WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age must be kept away unless continuously supervised.
- Never leave the appliance unattended during food drying. If the appliance is suitable for probe usage, only use a temperature probe recommended for this oven – risk of fire.
- Keep clothes or other flammable materials away from the appliance, until all the components have cooled down completely – risk of fire. Always be vigilant when cooking foods rich in fat, oil or when adding alcoholic beverages – risk of fire. Use oven gloves to remove pans and accessories. At the end of cooking, open the door with caution, allowing hot air or steam to escape gradually before accessing the cavity – risk of burns. Do not obstruct hot air vents at the front of the oven – risk of fire.
- Exercise caution when the oven door is in the open or down position, to avoid hitting the door.
PERMITTED USE
- CAUTION : The appliance is not intended to be operated by means of an external switching device, such as a timer, or a separate remote-controlled system.
- This appliance is intended to be used in households and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfasts and other residential environments.
- No other use is permitted (e.g. heating rooms).
- This appliance is not for professional use. Do not use the appliance outdoors.
- Do not store explosive or flammable substances (e.g. gasoline or aerosol cans) inside or near the appliance – risk of fire.
INSTALLATION
- The appliance must be handled and installed by two or more persons – risk of injury. Use protective gloves to unpack and install – the risk of cuts.
- Installation, including water supply (if any), electrical connections and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service. Once installed, packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children – risk of suffocation. The appliance must be disconnected from the power supply before any installation operation – risk of electrical shock. During installation, make sure the appliance does not damage the power cable – risk of fire or electrical shock. Only activate the appliance when the installation has been completed.
- Carry out all cabinet cutting works before fitting the appliance in the furniture and remove all wood chips and sawdust.
- Do not remove the appliance from its polystyrene foam base until the time of installation.
- After installation, the bottom of the appliance must no longer be accessible – risk of burn.
- Do not install the appliance behind a decorative door – risk of fire.
- If the appliance is installed under the worktop, do not obstruct the minimum gap between the worktop and the upper edge of the oven – risk of burns.
ELECTRICAL WARNINGS
- The rating plate is on the front edge of the oven (visible when the door is open).
- It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.
- Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.
- If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard -risk of electrical shock.
- If the power cable needs to be replaced, contact an authorised service center.
CLEANING AND MAINTENANCE
- WARNING : Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation. To avoid risk of personal injury use protective gloves (risk of laceration) and safety shoes (risk of contusion); be sure to handle by two persons (reduce load); never use steam cleaning equipment (risk of electric shock). Non-professional repairs not authorised by the manufacturer could result in a risk to health and safety, for which the manufacturer cannot be held liable.
- Any defect or damage caused from non-professional repairs or maintenance will not be covered by the guarantee, the terms of which are outlined in the document delivered with the unit.
- Do not use harsh abrasive cleaners or metal scrapers to clean the door glass since they can scratch the surface, which may result in the shattering of the glass.
- Make sure the appliance has cooled down before cleaning or performing maintenance. – risk of burns.
WARNING : Switch off the appliance before replacing the lamp – risk of electric shock.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol. The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations governing
waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. For further information on the treatment, recovery and recycling of household electrical appliances, contact your local authority, the collection service for household waste or the store where you purchased the appliance. This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE) and with the Waste
- Electrical and Electronic Equipment Regulations 2013 (as amended). By ensuring this product is disposed of correctly, you will help prevent negative consequences for the environment and
human health. The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment.
ENERGY SAVING TIPS
Only preheat the oven if specified in the cooking table or your recipe. Use
dark lacquered or enamelled baking trays as they absorb heat better. Food
requiring prolonged cooking will continue to cook even once the oven is
switched off. Standard cycle (PYRO): which is suitable for cleaning a very
dirty oven. Energy-saving cycle (PYRO EXPRESS/ECO) – only in some models -:
which consumes approximately 25% less energy than the standard cycle. Select
it at regular intervals (after cooking meat on 2 or 3 consecutive occasions).
DECLARATIONS OF CONFORMITY
This appliance meets Ecodesign requirements of European Regulation 66/2014;
Energy Labelling Regulation 65/2014; Ecodesign for Energy-Related Products and
Energy Information (Amendment) (EU Exit) Regulations 2019, in compliance with
the European standard EN 60350-1. This product contains a light source of
energy efficiency class G.
FAQ
Q: Can I leave the appliance unattended during a pyrolytic cycle?
A: No, it is advised not to leave the appliance unattended during any
operation, especially during a pyrolytic cycle.
Q: Can the appliance be used for professional purposes?
A: No, the appliance is intended for household and similar applications only,
not for professional use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>