PYLE PT865BT 5.2 Channel Hi-Fi Home Theater Receiver User Guide Product Information
- June 1, 2024
- Pyle
Table of Contents
PT865BT 5.2 Channel Hi-Fi Home Theater Receiver
Product Information
Specifications
- Manufacturer: Pyle
- Model: [Insert Model Number]
- Power Supply: [Insert Voltage and Frequency]
- Dimensions: [Insert Dimensions]
- Weight: [Insert Weight]
- Website: www.PyleUSA.com
Product Usage Instructions
Safety Recommendations
-
Read the instructions thoroughly before using the product.
-
Keep the safety and operation instructions for future
reference. -
Adhere to all warnings provided in the operating
instructions. -
Comply with all details outlined in the operation and
instruction manual. -
Follow the device manual provided by the manufacturer.
-
Use the appliance only according to the specified power supply
marked on the back panel. -
Ensure the plug is fully inserted into the wall outlet to avoid
exposed pins. -
Avoid overloading power outlets, extended cords, or
sockets. -
Avoid obstructing the heat dissipation device and electrical
panel. -
Keep the product away from heat sources and open flames.
-
Install the product on the wall only as recommended by the
manufacturer. -
Avoid exposing the product to moisture, water, or liquid
entry. -
Avoid inserting objects into product openings or allowing
liquids to spill into the product. -
Always unplug the power cord before cleaning and avoid spraying
cleaners directly onto the device. -
Exercise caution when transporting the appliance to prevent
overturning. -
During adverse weather or extended periods of non-use, unplug
the power cord. -
Seek professional maintenance when needed; do not attempt to
repair the product yourself.
Frequently Asked Questions (FAQ)
Q: Can I plug the device into any power outlet?
A: No, use only the specified power supply marked on the back
panel to prevent damage or hazards.
Q: How should I clean the product?
A: Always unplug the power cord before cleaning. Use a cloth
sprayed with cleaner, avoiding direct spraying onto the device.
Q: What should I do if the product stops working?
A: Unplug the device and seek professional maintenance. Do not
attempt to repair it yourself.
Questions? Comments? We are here to help!
Phone: (1) 718-535-1800 Email:
[email protected]
WARNING
We are greatly honored to offer you a high-quality product. Prior to operating
this machine for the First time, please carefully read this operational
manual. This will ensure a correct understanding of the machine’s
functionalities.
This symbol is designed to alert users to the presence of uninsulated
“dangerous voltage” within the product’s enclosure. This voltage may be of
sufficient magnitude to pose a risk of electric shock to individuals. This
symbol indicates the presence of crucial operating and maintenance (servicing)
instructions provided in the literature accompanying the product.
SAFETY RECOMMENDATIONS 1. Read the instructions: Before using electrical
appliances, carefully review all
safety and operational instructions. 2. Preservation instructions: Retain the
safety and operation instructions for
futurereference. 3. Caution: Adhere to all warnings provided in the operating
instructions. 4. Follow the instructions: Comply with all details outlined in
the operation
and instruction manual. 5. Device: Ensure adherence to the device manual
provided by the manufacturer. 6. Power supply: Use the appliance only
according to the specified power
supply marked on the back panel. 7. Grounding and polarity: This appliance
doesn’t require grounding.
Ensure the plug is fully inserted into the wall outlet to avoid exposed pins.
If the plug isn’t suitable, consult an electrician to replace the outlet
without compromising polarity safety. 8. Power line protection: Properly
arrange the power cord, avoiding excessive pressure. Pay attention to the
plug, socket direction, and positioning behind the electrical outlet. 9.
Overload: Avoid overloading power outlets, extended cords, or sockets, as it
may result in fire or electric shock.
1 www.PyleUSA.com
10. Ventilation: The amplifyer has a heat dissipation device; avoid placing
it on surfaces like beds, sofas, or blankets. Do not obstruct the electrical
panel with objects like tablecloths or newspapers.
11. Heat: Keep the product away from heat sources, including radiation
devices, heaters, or furnaces, to prevent overheating. Also, avoid placing it
near open flames, like candles.
12. Wall mounting: Install the product on the wall only as recommended by the
manufacturer.
13. Moisture and water: To prevent fire and electric shock, avoid exposing
the product to rain, water splashes, or using it near water sources.
14. Object and liquid entry: Avoid inserting objects into the product
openings as it may encounter dangerous voltage components, leading to fire or
electric shock. Never allow liquids to spill into the product.
15. Cleaning: Before cleaning, always unplug the power cord. If using a
cleaner, spray it onto a cloth for cleaning; avoid spraying directly onto the
device.
16. Moving the appliance: When transporting with a handcart, be cautious, as
excessive force or uneven surfaces might cause overturning.
17. Out of service period: During adverse weather or extended periods of non-
use, unplug the power cord.
18. Repair: Do not attempt to repair the product yourself, as it could expose
you to dangerous voltage. Seek professional maintenance when needed.
19. Replacement parts: Ensure maintenance personnel use manufacturerspecified
parts or those with equivalent performance. Unsuitable parts may lead to
hazards.
20. Volume control: Avoid turning up the volume when no audio signal is
present to prevent damage to the speakers.
21. Power cut-off: To completely disconnect power, unplug the power cord from
the socket.
22. Indoor use only: This product is intended for indoor use.
www.PyleUSA.com 2
PANEL FUNCTION DESCRIPTION 11
REAR PANEL FUNCTION DESCRIPTION 14 15 16 17
12
34 5678 9
10
1. Power switch 2. USB ports 3. Input selection button: Push this button down
to select sources:
HD/HD2/COAX/OPT1/FM/CD/AUX/BLUE/USB/ARC/DAC. Note: DAC signal display is
activated only when the signal cable is connected. 4/5/6. Function buttons ‘
/CH-‘, ‘ /AUTO’, ‘ /CH+’ Use these three keys to enable BT (Bluetooth), USB,
and FM operations: a. BT (Bluetooth) or USB mode: Press these keys for
previous song,
play/pause, and next song functions. b. FM radio channel: Press these keys for
station selection -,
automatic station saving, and station selection +. 7. Microphone menu button:
Press this button to adjust various parameters
using the total volume/multi-function adjustment knob. Adjust microphone
volume, treble, bass, echo, and delay settings. 8. Main menu buttons: Press
this button to adjust total volume, bass, and treble parameters using the
master volume/multi-function adjustment knob. 9. Group 2 6.35 microphone jack
10. Master volume/multi-function adjustment knob: Rotate this knob to control
the overall volume. Adjust music and microphone parameters using the main menu
and microphone menu respectively. 11. Display
3 www.PyleUSA.com
1 2 3 4 5 6 7 8 9 10 11 12
13
1. FM radio antenna interface 2. AUX audio input 3. CD audio input 4. Active subwoofer output port 5. Digital Optical fiber input port 7. Right surround speaker output 8. Left surround speaker output 9. Center speaker output
10. Passive subwoofer output 11. Right front speaker output 12. Left front speaker output 13. Power cable input port 14. HD signal 1 Input port 15. HD signal 2 Input port 16. HD signal output ARC 17. Digital coaxial input port
WIRELESS BLUETOOTH CONNECTIVITY: · Simple & Hassle-Free Pairing · Instantly
Receives Wireless Music Streaming · Works with all of Today’s Latest Devices
Smartphones, Tablets, Laptops, Computers, etc.) · Bluetooth Version: 5.0 ·
Bluetooth Network Name: ‘PyleUSA’ · Wireless Range: 30’+ ft.
WHAT’S IN THE BOX: · AV Receiver · Remote Control · Power Cable · FM Antenna
www.PyleUSA.com 4
FEATURES · 5.2 Channel Receiver System · AV (Audio/Video) Stereo Amplifier ·
Hi-Fi Home Theater Surround Sound · 4K Ultra HD TV Pass-Through Support · 3D
Video & Blu-Ray Video Pass-Through Support · Digital LED Display with FM Radio
· MP3 Digital Audio Support · USB Flash Drive Reader · DAC Digital Interface
(Supports Connecting to Computer’s Digital Audio
Signal for Better Sound Quality) · Built-in Bluetooth Wireless Audio Streaming
· Connection Interface: (2) x (HD), RCA (L&R), Speaker Binding Posts, Optical/
Coaxial Digital Audio · HD Output + Dedicated RCA Subwoofer Output · (2) 1/4”
-inch Microphone Inputs · Mic Echo, Delay, Bass, Treble, Volume Control
Adjustment · Next-Gen Audio DSP Sound Processing Technology · Connect & Stream
Audio from External Devices · Digital Graphic Audio Output Level Display ·
Over Current, Short Circuit, and Over Voltage Protection · Standby Power
Consumption is Less than 0.5W · Full Remote-Control Function
TECHNICAL SPECS: · Construction Materials: Aluminum Alloy Panel + Metal
Chassis · Amplifier Receiver Type: 5.2-Channel · Power Output: 1000 Watt MAX
(FL/FR/SW:100Wx3(4); SL/SR/CEN:20Wx3(4)) · Power Supply: AC 120V-240V, 50/60
Hz · Frequency Response: 20Hz-20KHz · Speaker Impedance: 4-8ohm · SNR: >78dB ·
THD (1KHz): <0.5% · Input Sensitivity: 800mV · Treble: 9dB (10KHz) · Bass: 9dB
(100KHz) · Radio Station Memory: 30 Presets · FM frequency: 88MHz -108MHz
5 www.PyleUSA.com
· Digital Audio File Support: MP3/WMA/APE/FLAC · Maximum USB Flash Support: Up
to 64GB · Battery Operated Remote Control, Requires (2) x `AAA’ Batteries, Not
Included · Power Cable Length: 4.9 ft (1.5m) · Power Supply: AC 120V-240V,
50-60Hz · Total Unit Dimensions (L x W x H): 16.9” x 19.8” x 5.1” -inches
REMOTE CONTROL FUNCTION
1. Under normal circumstances, operate the remote control within
approximately an 8-meter range in front of the remote control receiver. Direct
the remote control towards the receiver’s window on the machine.
2. Ensure there are no substantial obstacles between the remote control and
the machine.
3. Avoid placing the receiver in a position directly exposed to strong light,
particularly from converter-type fluorescent lamps or similar sources. If
exposed, relocate the unit to prevent direct exposure.
4. Replace the battery when the sensitivity of the remote control diminishes.
Note: If the remote control remains unused for an extended period, remove the
battery to prevent potential overflow and damage caused by battery fluid.
www.PyleUSA.com 6
1. Power button (Press OFF to shut down/display turn off ) 2. Center volume
up 3. Front channel volume up 4. Center volume down 5. Front channel volume
down 6. Total volume up 7. Sub channel volume down 8. Play/pause (Radio
searches automatically) 9. Previous song (Previous frequency radio station)
10. Total volume down 11. Loudness 12. Treble volume up 13. Bass volume up 14.
Treble volume down 15. Bass volume down 16. Signal source switch button 17.
Surround channel volume up 18. Surround channel volume down 19. Sub channel
volume up 20. Next (Next band radio station) 21. Channel 2.1/5.1 Switch key
22. Mute 23. System reset 24. Microphone volume up 25. Microphone volume down
26. Cancel voice in karaoke 27. Repeat playback on USB flash drive 28.
Microphone echo delay setting 29. Microphone volume menu setting
Note: Some keys must correspond to specific modes to function, otherwise, they
will be invalid.
7 www.PyleUSA.com
SYSTEM CONNECTION
When connecting the audio cable as depicted in the above illustration,
consider the following: 1. Match the colors of the sound cable to the red and
black ports of the power
amplifyer’s rear R and L ports. Ensure consistency in polarity from end to end
to prevent audio quality discrepancies or low bass issues. 2. Take care that
the stripped steel wires at both ends of the audio wire do not cross,
preventing short circuits that could potentially damage the system. 3. Insert
the pin wire of the sound cable firmly into the power amplifyer and audio
equipment ports. Gently tug the wire by hand to confirm a secure connection
and avoid noise caused by equipment movement. 4. Connect the audio equipment
and power amplifyer with the sound cable after powering up the system.
www.PyleUSA.com 8
DISPLAY GRAPHIC INSTRUCTION The display utilizes icons or symbols instead of typical letters. Here’s a guide to understand these symbols:
Radio Connection 1. Radio Antenna Setup: Insert the radio antenna securely
into the FM port
located at the rear of the machine. Extend the FM antenna outward for improved
radio reception. 2. Switching to Radio Mode: Press the “INPUT” key on the
lower panel or the remote controller until “FM” or “87.5” digits are
displayed, indicating the switch to radio mode. 3. Automatic Station Search:
Press and hold the ” ” key on the remote controller to initiate an automatic
station search. This process may take more than 5 minutes. 4. Station
Selection: Upon search completion, the system will jump to the first saved
radio station. To manually select a saved station, use the ” ” and ” ” keys.
OPERATION INSTRUCTION Connecting Power Supply and Starting Operation 1. Power
Supply Connection: Insert one end of the provided power cord
firmly into the power input port at the rear of the product. Connect the other
end to a power socket. 2. Powering On: Press the machine’s power switch. The
display screen will show “-HELLO” initially and then transition to the user’s
last used settings after 2 seconds. 3. Completing Boot-Up: Once the above
steps are completed, confirming successful boot-up, proceed to connect
additional equipment.
9 www.PyleUSA.com
Bluetooth Connection Turn on the machine’s power supply and switch the mode to
“BLUE”. When the letters flash, it’s in Bluetooth state. A. Activate the
Bluetooth function on your mobile device to search for available
devices. B. Locate “PT865BT” in the search list and connect without a
password.
If not found, refresh the search or toggle the phone’s Bluetooth on and off.
C. Upon successful connection, the “BLUE” on the screen will stop blinking,
and “Connected” will display on the mobile phone. D. Play music on the mobile
device while adjusting the mobile phone’s volume.
The wireless range is approximately 5-10 meters.
www.PyleUSA.com 10
USB MODE 1. Press the INPUT key on the panel or remote control to switch to
“USB” mode.
If a USB disk is inserted in other modes, it will take priority automatically.
2. When the display shows “00:00” and the seconds change, it indicates the
machine is reading the files on the USB flash drive. 3. Ensure the USB flash
drive stores only audio format files, not in the root
directory, and avoids other file types like videos. If reading issues persist,
consider formatting the USB flash drive, with a maximum capacity not exceeding
64GB. 4. The machine supports power-off memory function and audio formats:
MP3, WMA, FLAC, APE.
Note: 1. While playing music, avoid removing the U disk to prevent damage to
the
device. 2. For an enhanced listening experience, opt for high-quality, larger
capacity
music files. AUX/CD Audio Connection
11 www.PyleUSA.com
Playback devices supporting AUX/CD connections vary, including computers,
televisions, projectors, TV boxes, DVDs, and media players. Mobile phones and
MP3 players commonly feature two types of output ports: a. L/R Red and White
Lotus Port: Requires a 2-to-2 audio connection line.
Ensure correct correspondence to the red and white ports to avoid distorted
sound. b. 3.5mm Universal Stereo Port: Needs a 1-to-2 audio connection line.
1. Press the panel’s INPUT or use the remote control’s selection key until
“AUX” or “CD” is displayed.
2. Choose the appropriate audio cable for AUX or CD, and connect the playback
device to the audio input (as depicted in the figure).
3. Once connected, adjust the volume to a level above 17 and then begin audio
playback through the selected player.
DAC Audio Connection
1. The machine features a DAC (Digital-to-Analog Converter) audio interface,
allowing direct connection to a USB computer sound card.
2. Utilize the dedicated DAC connection cable to link the machine to the DAC
interface. Ensure both ends are securely plugged in (as demonstrated in the
figure).
3. Press the “INPUT” key on the panel until “DAC” is displayed, indicating
the signal has switched to DAC mode.
4. Once all connection cables are correctly set, increase the machine’s
volume and commence audio playback.
Note: The amplifyer intelligently detects DAC sound. Only select DAC mode
after the wires are connected, and the signal has been transmitted.
www.PyleUSA.com 12
Digital Signal Optical/Coaxial Connection
HD Audio Connection
1. Press the “INPUT” on the panel or remote control until “OPT1” and “COAX”
are displayed in English.
2. Choose the appropriate audio signal cable to connect the audio source with
the equipment.
3. Once connected, adjust the playback device’s system volume to an
appropriate level.
4. If there’s no sound despite correct connections, access the system setting
menu with the following steps:
A. Navigate to System Settings > Sound Settings > Select the output device (TV
– digital coaxial or optical SPDIF – HDMIARC – Bluetooth) corresponding to the
output selection.
B. In Sound Settings, choose Audio Output Format (Automatic/PCM) – select PCM.
Note: The audio signal output format must be set to PCM if the external
playback device uses digital signal connections (optical fiber, coaxial, DAC,
HDMI/ARC) with the machine.
13 www.PyleUSA.com
1. Turn on the amplifyer and press the “INPUT” key on the panel or remote
control until “HDI” is displayed, indicating the current signal has shifted to
the first group of HD mode. When utilizing the ARC function, ensure to switch
to “ARC”.
2. Choose the suitable audio cable corresponding to the HDMI port connected
to the audio and link the playback device as shown in the provided figure.
3. Set the sound volume above 17 and initiate audio playback through the
player. 4. If there’s no sound, follow these steps:
· Increase the volume of the playback device. · Verify the film source is in a
playing state. · Check if the HD cable is securely plugged in and if the
input/output lines are correctly inserted. 5. If all connections are correct
but there’s no sound or noise, access the system setting menu on the playback
device: A. Navigate to System Settings > Sound Settings > Select the output
device
(built-in speaker of TV, Digital coaxial or optical SPDIF, HDMI ARC,
Bluetooth) and choose ARC.
www.PyleUSA.com 14
B. In Sound Settings, select Audio Output Format (Source/Automatic/PCM) and
ensure the PCM option is chosen.
C. The ARC return function necessitates the TV to support this feature.
Usually, the TV will mark HDMI(ARC), requiring a line connected to the
corresponding audio HD output.
Auxiliary Subwoofer Signal Connection
1. The machine can be connected to both wired and wireless microphone sets.
Simply insert a 6.5mm audio cable into the microphone single interface of the
sound system.
2. The microphone effect is contingent on the sound volume settings,
microphone quality, and the environment. Detailed instructions on microphone
volume settings are available in the manual; please refer to it for further
guidance.
Sound Setting Instructions A. Treble/Bass and Total Volume Settings
1. This interface is primarily an upgraded configuration for users with a
high demand for bass, significantly enhancing bass output.
2. Select the appropriate audio cable corresponding to the SW OUT port
connected to the audio. Connect the Sub to the amplifyer as indicated in the
figure provided.
3. Note that the external subwoofer must be active, preferably equipped with
an 8-inch bass driver and rated power exceeding 100W.
4. If the subwoofer produces no sound, increase the volume of the subwoofer
itself and press the “BASS+” button on the remote control.
Microphone Connection
1. To adjust the treble of the overall sound, use the TREB+ or TREB- buttons
on the remote control.
2. Adjust the BASS of the overall sound using the BASS+ or BASS- buttons on
the remote control.
3. The machine’s gain is set at +9. 4. To control the overall sound volume,
utilize VOL+ or VOL- on the remote
control. The default value is 10, with a maximum value of 32. 5. Activate
loudness by pressing the LOUD button on the remote control to
increase the low frequency by 3dB.
B. 5.1 Channel Volume Setting (Each channel’s volume range: 0-10. Default
volume for each channel is 10 at machine startup)
15 www.PyleUSA.com
www.PyleUSA.com 16
1. The machine allows independent volume adjustment for each channel. Details
are as follows.
2. Use the corresponding remote control area for each channel: FR for front
right, FL for front left, CEN for center, SW for sub, SL for surround left, SR
for surround right. The volume for each channel ranges from 0 to 10, with a
default setting of 10 at machine startup.
3. If the center and surround channels are not adjustable, use the CH.M
button on the remote control. The screen switches between 2.1 and 5.1
channels. In 2.1ch mode, the center and surround channels are not adjustable.
1. To adjust the total volume of the microphone, use M.V+ and M.V- on the
remote control.
2. For microphone treble adjustment, press M.TONE first, then press MTO for
treble indication. Similarly, for Bass setting, choose MBO in the M.TONE
setting. For microphone echo and delay adjustments, press the ECHO key on the
remote control. Use ECOO for echo and dL00 for delay indication. Adjust these
settings with M.VOL+ or M.VOL- on the remote control to increase or decrease.
E. Karaoke, Vocal cut
C. Mute Settings 1. Locate the MUTE key on the remote controller and press it.
“U-00” will appear
on the screen, indicating the sound has been muted. 2. Note that the screen
will continue to flash after muting. The display will return
to normal once the mute function is canceled.
F. Sound Reset Settings
D. MIC Volume Setting
1. The machine automatically stores each volume setting. Upon restarting
after a power-off, it reverts to the previous settings.
2. If the current settings are unsatisfactory or if there’s confusion in tone
adjustments, press the “RESET” button on the remote control to restore the
factory volume settings.
17 www.PyleUSA.com
www.PyleUSA.com 18
TROUBLESHOOTING
Problem
Reason
Abnormal or Faulty Screen
External interference, CPU issue
No Sound
· Speaker or audio device
improperly connected · Power cable not correctly
plugged into the socket · Mute mode activated · Speaker short circuit
Sound Distortion
· Incorrect amplifyer input · Volume set too high
Solution
Power off the system. Unplug it. Turn it back on
· Check and ensure proper speaker and audio device connections.
· Correct power supply connection
· Adjust volume to the right level
· Disable mute mode · Power off, reconnect
speakers, and restart
· Ensure proper connection
· Adjust volume to an appropriate level
Staccato and Relay
Ticking Noise
· Speaker impedance below
4 ohms · Volume set too high · Speaker short-circuited or
improperly connected
· Use speakers with matched impedance
· Adjust volume appropriately
· Power off, reconnect speakers, and restart
19 www.PyleUSA.com
www.PyleUSA.com 20