DOMETIC 4445103397 Oceanair Skysol Track Small Instruction Manual

DOMETIC 4445103397 Oceanair Skysol Track Small

Specifications

• Product Name: Skysol Track Small
• Type: Blind
• Manual/Powered: Manual or Powered
• Available Languages: English, Norwegian, German, Finnish, French, Chinese, Spanish, Italian, Dutch, Danish, Swedish

Explanation of symbols

WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE!
Indicates a situation that, if not avoided, can result in property damage.

NOTE
Supplementary information for operating the product.

Safety instructions

WARNING! Failure to obey these warnings could result in death or serious injury.

Electrocution hazard

• Do not operate the device if it is visibly damaged.
• If the power cable for this device is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified or competent person to prevent safety hazards.
• Inadequate repairs may cause serious hazards.
• Disconnect the blind from the power supply before carrying out any maintenance.

Health hazard

• Important safety instructions. It is important for the safety of persons to follow these instructions. Save these instructions.
• This device can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.
• Children shall not play with the device.
• Cleaning and user maintenance shall not be done by children without supervision.
• Blinds should be stowed before maneuvering to ensure no restriction of the driver’s vision.
• Do not fit powered blinds to escape hatches.
• Modification of the design or configuration of the equipment without the express permission of the manufacturer may create a dangerous situation.
• Do not allow children to play with the control device of the internal blind. Keep remote controls away from children.
• Frequently examine the installation for signs of wear or damage to cables. Do not use if repair is necessary.
• Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity.

Suffocation hazard

• This device contains small parts. Keep it away from children under 3 years.
• The packaging includes plastic bags. Keep them away from children under 3 years.

CAUTION! Failure to obey these cautions could result in minor or moderate injury.

Risk of injury

• The device must only be installed, removed, or repaired by a qualified or competent person using suitable fastening material.
• Take reasonable precautions when installing the blind and wear appropriate personal protective equipment.
• Only for boats and yachts: If the blind is in front of an open window, then the blind should be stowed when driving at more than 10 knots or in a sea state of more than moderate, as this can cause damage to the blind. Parts that come loose may injure persons in the vicinity.

NOTICE: Damage hazard

• Blinds should be stowed completely when a boat or vehicle is under way.
• Use screws and plugs suitable for the wall construction to fix the blind.
• Ensure that you do not drill through the wall.
• Ensure that your hands are clean or wear suitable gloves to avoid marking the fabric.
• Check that the voltage specification on the cable label is the same as that of the power supply.
• Only use cables with a suitable cross-section.

Scope of delivery

• Blind
• Side tracks
• Fitting components
• Safety information

Accessories

Accessories are available using the separate order form. You can find your authorized customer service center at dometic.com.

Intended use

The blind is suitable for:

• Installation in yachts and boats
• Installation in caravans and motor homes

The design and size of the blinds are custom-made. The fabric of the blinds is cut to fit the customer‘s specifications.
The blinds are designed for interior use only and should not be installed in bathrooms, wet rooms, or other locations with a high level of humidity.
This product is only suitable for the intended purpose and application by these instructions.
This manual provides information that is necessary for the proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.

The manufacturer accepts no liability for any injury or damage to the product resulting from:

• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than the original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.

Technical description

The blind is available in two operating types:

• Manual
• Powered

NOTE
After delivery, the blind type and the scope of delivery should be checked according to the order confirmation. The number on the data plate indicating the blind type is located on the back of the head rail.

Installation

WARNING
Powered blinds: Disconnect the power supply before you begin and ensure that it can not be reconnected until installation has been completed.

CAUTION! Risk of injury
Important safety instructions. Follow all instructions since incorrect installation can lead to severe injury.

• The blind can be fitted in a recess or to the wall or ceiling.There are different head rails for powered blinds and manual blinds.
• Depending on the space in the installation location, the sequence of installing the blind components may vary (e.g. to fit the head rail before the side tracks).

Installing the side tracks

Installing the head rail

Installing the blind

Manual blind

Powered blind

Installing the cord plugs (only for manual blinds)

• Check the operation of the blind by moving fully to the top and to the bottom.

If the blind is properly adjusted, it should hold in all positions in between and operate with ease.

• If the blind falls down on its own, the cords need to be shortened. The easiest way to do this is at the bottom end plugs by pulling out the plug and tying a new double knot. Both cords need to be adjusted evenly. Shorten the excess cord only after you have thoroughly tested the blind.
• Make sure the springs in the head rail is not pulled to one end of the head rail, but is approximately in the middle. If it is not, the tensioning does not work properly.

Connecting the blinds (only for powered blinds)

• The electrical power supply must be connected by a qualified electrician who has demonstrated skill and knowledge related to the construction and opera-tion of electrical equipment and installations and has received safety training to identify and avoid the hazards involved.
• The powered blinds are available for a connection to a 12/24 Vg power supply. The data plate on the head rail provides important information on the specifications of the motor.

The following notes must be observed when connecting the blinds:

• Ensure cables are not damaged during installation. Routings of cables through walls or bulkheads must be protected and insulated by appropriate bushing, grommets or cable conduits.
• Ensure that a 12 V or 24 V stabilized power supply line is available for the drive at the point of installation. The power supply line is suitably arranged and protected.
• The product must be connected to the correct power supply as specified on the product label. The motor in the product is designed to cut out when a set current is exceeded but the supply should be fused to protect the wiring to the product.
• Secure all cables to prevent any contact with moving parts.
• Only use power supply units and control elements recommended by the manufacturer to prevent damage or faults during operation caused by incompatible electrical components.
• Control devices (e.g. switches) must be installed in visible locations.
• One regulated power supply of the required specification is required per motor as failure to do so may cause the motor to function improperly.
• Any adjustment of set stop positions should only be made using the method specified for the motor type to avoid damage to the motor.

• Connect the motor as shown in the wiring diagrams.

Dometic Radio Controlled Blind External Receiver

Dometic Radio Controlled Blind Internal Receiver

Manually switched blind

Somfy RTS Controlled Blind External Receiver

Somfy Radio Controlled Blind Internal Receiver

Key to wiring diagrams

NOTE

• Accessories are available using the separate order form.
• Observe the applicable documents for the controls and the operating elements.

Operation

CAUTION! Risk of injury
Only for boats and yachts: If the blind is in front of an open window, then the blind should be stowed when driving at more than 10 knots or in a sea state of more than moderate, as this can cause damage to the blind. Parts that come loose may injure persons in the vicinity.

Operating manual blinds
The blind can be moved to any position by the handle.

• Proceed as shown to operate the manual blind:

Operating powered blinds

Observe the following notes:

• Each blind can be stopped in any position.
• When operating the blind with an automation system, the operation depends on the programming of the controls.
• Proceed as shown to operate the powered blind:

NOTE
The motors have a built-in, self-resetting thermal cut-out for safety reasons. Prolonged use or overloading the blind could trigger the cut-out. If this happens allow the motor to cool up to half an hour.

Cleaning and maintenance

WARNING! Risk of injury
Take appropriate organizational measures for preventing the operation of the blind when maintenance, such as window or wall cleaning, is being carried out in the vicinity, for blinds, which can be operated from a position without the blind in view.

NOTICE! Damage hazard

• Do not grease, oil or lubricate the blind. Lubricants will damage the fabric.
• Rubbing can damage the fabrics.
• Spot-cleaning may result in cleaner areas than the surroundings.
• Do not soak the blinds.
• The manufacturer recommends testing any cleaning agents on a hidden area of the blind first.

Proceed as shown to clean the blind:

Troubleshooting

Warranty

Refer to the sections below for information about warranty and warranty support.

Australia and New Zealand

• If the product does not work as it should, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer). The warranty applicable to your product is 1 year(s).
• For repair and warranty processing, please include the following documents when you send in the device:
  • A copy of the receipt with the purchasing date
  • A reason for the claim or description of the fault

Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

New Zealand only
This warranty policy is subject to the conditions and guarantees which are mandatory as implied by the Consumer Guarantees Act 1993(NZ).

Local support
Please find local support at: dometic.com/dealer

United States and Canada

• LIMITED WARRANTY AVAILABLE AT
• DOMETIC.COM
• IF YOU HAVE QUESTIONS OR WANT TO OBTAIN A COPY OF THE LIMITED WARRANTY FREE OF CHARGE, CONTACT:
• DOMETIC CORPORATION
• CUSTOMER SUPPORT CENTER
• 5155 VERDANT DRIVE
• ELKHART, INDIANA 46516
• 1-800-544-4881
• customersupportcenter@dometic.com

All Other Regions
The statutory warranty period applies. If the product is defective, please contact the manufacturer’s branch in your region (dometic.com/dealer) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device:

• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault

Note that self-repair or nonprofessional repair can have safety consequences and might void the warranty.

Disposal

Australia and New Zealand

• Place the packaging material in the appropriate recycling waste bins wherever pos-sible.
• Consult a local recycling center or specialist dealer for details about how to dispose of the product in accordance with the applicable disposal regulations.

All other regions

• Place the packaging material in the appropriate recycling waste bins wherever pos-sible.
• Consult a local recycling center or specialist dealer for details about how to dispose of the product in accordance with the applicable disposal regulations.
• The product can be disposed free of charge.

MORE INFORMATION

• YOUR LOCAL DEALER
  dometic.com/dealer

• YOUR LOCAL SUPPORT
  dometic.com/contact

• YOUR LOCAL SALES OFFICE
  dometic.com/sales-offices

A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB • Hemvärnsgatan 15 • SE-17154 Solna • Sweden

Frequently Asked Questions

• Q: Can I install the Skysol Track Small blind on my own?
  • A: Yes, you can install the blind following the installation instructions provided in the manual. However, if you are unsure, it is recommended to seek professional assistance.
• Q: How do I clean the blind?
  • A: To clean the blind, use a soft cloth or sponge with mild soap and water. Avoid using harsh chemicals or abrasive materials that may damage the fabric.
• Q: What should I do if the blind is not operating correctly?
  • A: If you experience issues with the operation of the blind, refer to the troubleshooting section in the manual. If problems persist, contact customer service for assistance.

References

• Outdoor Adventure Starts Here | This Way Out | Dometic USA
• Find a Dealer | Dometic USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>